PROVN OF INTERLOCKING PAVED AREA FROM UNIT MAIN GATE TO CAR PARKING SHED AT SHO BANGALORE WITH CERTAIN MINOR / REV WORKS AND SPECIAL REPAIRS / REPLACEMENT OF STREET LIGHT UG CABLE AT CMP CENTRE AND SCHOOL UNDER GE(SOUTH) BANGALORE.

Amount

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and nexc 10 sq m on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

M&L for Plain Cement Concrete 1:4:8 Type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry 1:3:6 of Type C-1 (20mm graded stone aggregate) with solid blocks,exc.10 cm in width and setting in cement mortar1:6, complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces such as wall finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick CM 1:4, on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified.

M&L for Pre cast RCC (1:2:4) type B-1 for lintel set in cement mortar (1:4) complete all as specified.

M&L Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

All as per item no.10 above but 6 to 8mm dia complete all as specified and as directed.

S&F Powder coated anodised aluminium frame, for door, windows, ventilators runner & packing with rubber gasket etc, with one or more rebates including joinning cleat for rebates including joining cleats for fixing etc, complete all as specified & directed by Engineer-in-Charge.

S&F 4.0 mm thick figured glass, pin head type and glazing with aluminium beading & rubber gasket in each panes in square n.exc 0.5 sqm in each pane in louvers complete all as specified and as directed.

S&F solid door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification & drawing complete all as specified and as directed.

M&L factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be filled in the MS frame welded /seated to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement applying and fixing in the frame at side as per specification.

S&F Stainless steel butt hinges of size 100mm fixed Complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed .

S&F 150 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

S&F mild steel sliding bolt 250 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

M&L 75mm thick Cement concrete1:4:8 type D-2, (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in floorings including finishing the surface even and fair without extra cement complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc complete all as specified and directed.

S&F coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat complete all as specified and as directed.

M & L for applying three coats of white wash on wall newly plastered surfaces incl preparing the surfaces. etc and cleaning all window panes from splashes / dropping all as specified and directed.

M &L for preparation of new plastered surface and applying two coats of cement base paint over cement primer on walls complete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top)vhoilsted and fixed in position all as specified in SSR Part-I complete all as specified & directed by Engineer-in-Charge.

S&F 25mm Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms complete all as specified.

S&F 25 mm float valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as Specified

Supplying and laying of CPVC ball valve 25mm dia complete all as specified.

Supplying and laying of CPVC Union 25mm dia complete all as specified.

S & F in repair of CPVC pipes 25mm Incl. SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia male brass threaded adapter complete all as specified and as directed.

S&F of 20 mm dia female brass threaded adapter complete all as specified and as directed.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC bends any radius 75mm dia complete all as specified and as directed.

S&F PVC bends any radius 110mm dia complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap complete all as specifed and as directed.

S&F plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float, handle, bracket PVC short bend/long bend etc. complete all as specified and directed .

S&F vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F PVC connection 15 mm size , 60 cm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified.

S&F 15 mm bore brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule.

S&F pillar taps, tall height brass,fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S&F angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F 100mm dia PVC (SWR) floor/Nahani trap, plain with 100mm dia SS grating including solvent cement

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

M & L 75 mm thick PCC (1:3:6) type C1 using as in plinth protections with joint cutting and joint filling with Bitumen grade 'B' etc complete all as specified.

M&L Cutting into 100mm existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Excavation in post holes in soft loose soil (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50mtr and making good surface.

M&L PCC 1:2:4 type B2 using 40 mm graded stone aggregate as in foundation, fillings and mass concrete complete all as specified

S&F Fe 410 -W (Gde- E- 250) quality- B Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified & directed by Engineer -in-Charge.

S&F Fe 410 -W (Gde- E- 250) quality- A MS plates (Plain or chequered) channel, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified & directed by Engineer -in-Charge.

S & F Fe 410 -W (Gde- E- 250) quality- B MS rectangular or Square hollow section steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified & directed by Engineer -in-Charge.

M&L preparation of new or previously untreated surfaces of steel and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified & directed by Engineer -in-Charge.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified complete.

S&F in repairs SS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

M&L Surface dressing n exc 15 cm deep in soft/loose soil. Including Clearing away all loose materials complete all as specified.

M&L 100 mm thick cement concrete 1:4:8 type D-2 as in sub base etc complete all as specified & directed

M&L for chequered cement concrete tiles 40cm x 40cm x 25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors etc over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishing complete all as specified.

S & F of 8 feet (with four pipes) Pulley Operated clothes drying system consisting of anodized aluminium pipes, each of outer dia 22mm and inner dia 19.8mm. Pulleys made up of Delrin with rope guide mounted on channel pair of length 24" (distance between two pipes is adjustable). Locking system to hide rope knot. channel to be mounted or fixed with self tapping screws provided in kit. Rope will be Polyster braided undyed of 3.5 + 0.5mm dia complete all as specified and as directed. Note : Easy dry or other equivalent make as approved by GE.

Supply and fixing Powder coated aluminium (minimum thickness of powdder coating 50micron) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and joined mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge.

Supply and fixing Powder coated aluminium window shutters, sliding type two track aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and as directed.

M & L for sand cushioning in trenches for bricks of U/G cable with coarse sand laid dry in trenches with uniform thickness complete all as specified and as directed. Note : Punned thickness only measured for payment.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and as directed.

Supply and laying GI medium grade GI tubing of size 32mm dia complete with all fitting laid in trenches / walls complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm x 2 core complete all as specified and as directed.

Supply and laying GI medium grade GI tubing of size 25mm dia complete with all fitting laid in trenches / walls complete all as specified and as directed.

Cutting screwing existing GI pipe up to 50mm for inserting Tee pieces, bends, sockets etc for taking out of new connection all as specified and as directed.

S & F Gun metal gate valve of size 25mm dia with inner wheel head screwed both ends in iron pipe and fixed all as specified and as directed.

S & F 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

M & L for excavation over areas on soft / loose soil, n exc 1.5m deep and getting out complete all as specified and as directed.

M & L for removal of excavated material exc 250m but upto a distance of 1.5km and depositing where directed complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne and n exc 12 tonne complete all as specified and as directed.

Rolling and consolidating for hardcore broken stone or boulders n exc 15cm thick with power roller exc 8 tonne and n exc 12 tonne complete all as specified and as directed.

M & L 150mm thick cement concrete type D2 1:4:8 for sub base (40mm graded stone aggregate) complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed or fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M & L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS) including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories and fixed in existing sunk boxes and covered with new 3.00mm thick ISI marked laminated sheet cover and brass screw with cup washers for fixing switches / regulators etc.

(a) One light point / CB controlled by one switch

(b) One fan point controlled by one switch

(c) One 3 pin 5 Amps socket out let on independent board

M & L switch piano, flush type single pole, One way 5 Amps all as specified and as directed.

M & L switch socket outlet 2 in 1, 3 pin 5A all as specified and as directed.

S & F ceiling rose surface bakelite 65 x 50mm 3 terminals all as specified and as directed.

S &F MCB DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar, 240 volts IP - 43 with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incoporation of MCB's nad isolators etc complete all as specified and as directed.

S & F MCB SPN 'C' Curve 6-40 Amps, 240 volts all as specified and as directed.

S & F MCB SP 06-40 Amp, AC 240 volts all as specified and as directed.

S &F surface mounted Mini Mirror light LED batten 2 feet with extruded aluminium housing and robust construction 10W system lumen with all accessories including flexible copper 2 core wire from fitting to ceiling rose required length all as specified and as directed.

S &F surface & wall mounted LED batten 4 feet with extruded aluminium housing and robust construction 20W system lumen with all accessoriesincluding flexible copper 2 core wire from fitting to ceiling rose required length all as specified and as directed.

S & F PVC Body sound proof Exhaust fan 300mm size with single phase 230 volt 900RPM with louvers made of sturdy Engineering plastic complete, Voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm including making a hole in wall and finishing the disturbed surfaces of wall complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm x 4 core including taking down of existing cable complete all as specified and as directed.

Supply and lay pipe galvanized light grade of size 40mm dia with fittings for cable protection using road crossing etc including taking down of existing one all as specified and as directed.

M & L for Breaking road, pavement. Hardstanding, tiles of any type, including excavation of sub base, soil upto the depth of 0.60 mtr and width 0.45 mtr by mechanical means for fault finding in electric cables and including making good to the disturbed surfaces matching with existing after rectification of fault including removal of surplus material to nearby dumping point complete all as specified and as directed. Note : (i) Any T & P required for work is deemed to be included in quoted rates (ii) Tiles, cement concrete etc required for making good in deemed to be included in quoted rates.

Supply and fixing junction box suitable for IP 65 for and including terminal block 32 Amps, terminating LT cable of size upto 16 SQmm fabricated of thermoplastic complete with gaskets, gland for cable entry and locking arrangement including mounting arrangement for pole including taking down of existing one complete all as specified and as directed.

S & F PVC conduit pipe from PVC junction box to street light bracket for protection of cable fixing clamp on PCC poles drilled the hole and insert a PVC gutti and screwed suitable size screw and fix the clamp including PVC 3 core copper cable 1.5Sqmm insulated for fixing of junction box as approved street light fittings complete all as specified and as directed.

Srisrinivasaenterprises

Elite Constructions