GE/CHM-65/2020-2021 PROVN OF SECURITY FENCE ALONGWITH SECURITY BARRIER, TILING AND OTHER WORKS UNDER AGE B/R I AND AGE B/R III AT CHANDIMANDIR

Amount

Site clearance in soft and loose soil including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exc 30cm grith and removing rubbish outside the periphery of the area under clearance complete all as specified and directed by Engineer-in-charge.

Surface dressing n exc 15 cm deep in soft and loose soil complete all as specified and directed.

Excavation over areas not exceeding 1.5m deep and getting out hard and dense soil complete all as specified & directed by Engineer-in-Charge.

Material and labour plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m deep but not exceeding 3.00m deep for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard and dense soil all as specified & directed by Engineer-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.

Removal excavated soil to a distance not exceeding 1.5Kilometre and depositing where directed complete all as specified & directed by Engineer-in-Charge.

Material and labour hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

Material and labour 100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in flooring, finished even and fair complete all as specified and directed.

Material and labour RCC (M-30 design mix, using 20mm graded crushed stone aggregate) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour RCC (M-30 design mix, using 20mm graded crushed stone aggregate) walls, retaining walls,basement walls, ballastwalls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour reinforced cement concrete (M-30 design mix, using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour reinforced cement concrete (M-30 design mix, using 20mm graded crushed stone aggregate) as in coloumns, pillars etc complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work, vertical or to batter to give rough finish to flat surfaces complete all as specified and directed.

Material and labour form work to faces of walls, parapets and staircase railings and similar work including attached, pillasters, buttresses etc. vertical or to batter to give rough finish to flat concrete surfaces complete all as specified and directed

Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.

Material and labour form work to sides of pillars, coloumns and similar items (square, rectangular or polygonal) including edges rough finished surface of concrete flat complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

Material and labour mild steel TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hoping for columns and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

Material and labour brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete as in roof, parapet ,walls, manholes, drains as per site requirement all as specified & directed.

Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

Material and labour, 15mm thick rendering in Cement and Sand mortar 1:4 over concrete /brick surfaces finished fair and even without using extra cement, and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.

Material and labour, 15mm thick rendering in cement mortar 1:6 on brick walls or concrete surface and finished even and smooth without using extra cement and providing necessary scaffolding , safety precautions and other requisite arrangements as per site requirement complete all as specified & directed.

Supply and fixing for framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.

Material and labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Supply and Fixing mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item 28 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete as specified & directed by Engineer-in-charge.

Supply and fixing mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal exc 5cm and n.exc 10cm long, diameter of shank 11-15mm, complete all as specified and directed.

Supply and fixing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified & directed by Engineer-in-charge. (Note: - Each line wire to be measured).

Supply and fixing for 75mm bore PVC (SWR) pipes single socketed in weep hole of retaining wall complete all as specified and directed by Engineer-in-charge.

Supply and fixing UPVC pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed

Dismantling of posts or struts (wood, steel or R.C.C.) any section including taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed.

Dismantling fencing wire mesh,any type ,complete all as specified & directed by Engineer-in-charge.

Supply and fixing barbed rozor type concertina coil fixed on exisiting angle post and barber wire over security wall with coil 6 to 8 RM per coil of 610mm dia, approx weight of coil 8.00 kg hot dip galvanised and binding with and including MS annealed wire of 0.90mm complete all as specified and directed.

Material and labour for Boulder filling dry, handpacked tightly, as in wire crate in vertical bunds with sloping fac (wire crate measured separately) complete all as specified and directed.

Material and labour for Boulder pitching, laid dry, hand packed tightly complete all as specified and directed.

Supply and fixing (Except barbed wire) galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified & directed by Engineer-in-charge. (Note: - Each line wire to be measured). Note : old serviceable barbed wire retrieved from demolition shall be reused after proper straightening and cleaning etc.

Supply and fixing (except concertina coil) barbed rozor type concertina coil fixed on exisiting angle post and barber wire over security wall with coil 6 to 8 RM per coil of 610mm dia, approx weight of coil 8.00 kg hot dip galvanised and binding with and including MS annealed wire of 0.90mm complete all as specified and directed. Note : old serviceable concertina coil retrieved from demolition shall be reused.

Material and labour for RCC pipes class NP-2 600mm dia bore, with collars, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed (excavation, earthwork and PCC shall be measured and paid for separately)

Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish all as specified & directed .

Material and labour, reinforced cement concrete M-30 design mix using 20mm graded crushed stone aggregate as in Chajja and similar works, all as specified and directed Note : Reinforcement and form work shall be measured and paid separately

Material and labour, form work to, chajjas and similar items including edges for fair finished surface of concrete complete all as specified and directed.

Material and labour 25mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in sub base/ base for laying tiles thereon, finished even and fair without using extra cement complete all as specified and directed.

Material and labour coloured vitrified ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

All as per serial item No 47 hereinbefore but on vertical surfacs as on skirting complete over and including 15mm thick scree bed in cement mortar 1:4

Material and labour coloured vitrified ceramic tiles, dark shade, jointless, 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

Material and labour for 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site, complete all as specified and directed.

Material and labour for PVC sheet fillet 35mm wide, 5mm thick for wall paneling, complete all as specified and directed.

Material and labour false ceiling with 12mm thick gypsum board of size 595mm x 595mm on and including standard GI snap grid , framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc) supported with 1mm thick standard GI section, fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, complete all as specified and directed.

Material and labour preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Supply and fix, powder coated aluminum frame/ chowkhat for doors, windows, partition, ventilator etc with one or more rebates including joinging cleats for fixing etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed Note : Shutters shall be measured and paid separately "as supply and fix" under respective items.

Supply and fix, powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminium door shutters made of aluminium sections including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge. Note : (i) Only weight of the aluminium sections shall be measured and paid. (ii) Glass panes and panels shall be measured & paid separately under respective items. Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.

Supply and fix, powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminum Three track sliding window with and including aluminium grill of design and pattern decided by Engineer-in-Charge with and including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium beading fittings suitable handle (1 No) and self locking arrangement complete all as shown on drawing, specified and directed. Note: Glass panes, shall be measured & paid separately under respective items. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing No. TD-259(C) sheet 1/3 to 3/3 before fabrication and bulk order to the manufacturer.

Supply and fix 5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels exc 0.5 Square metre in each pane, complete all as specified & directed. NOTE:- Aluminum beading rubber packing and screws etc are not included in this item and the same paid separately under respective items.

Supply and fix aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified & directed.

Material and labour, preparation of new plastered surfaces of walls and applying two coats of interior acrylic emulsion over a coat of 2mm thick wall care putty complete all as specified and directed.

Material and labour, 1.0mm to 1.5mm thick dune /grit finish ready mixed product with natural stone granules/800, 1000 to 1200 micron consisting of excellent synthetic/acrylic binder anti cracking anti foaming, anti fungal, anti rusting agent and applied directly over and including cement plaster upto 10 to 12 mtr height with and including necessary scaffolding and safety precautions complete a cement plaster/stone surface over a coat of base as directed

Material and labour non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 complete all as specified and directed.

Material and labour glazed coloured ceramic tiles in vertical surface 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Supply and fix, PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

Material and labour for cast iron nahani trap 75mm dia with grating including jointing to waste pipe with run led jointed and setting in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Supply and fix vitreous china, wash down water closet pan, white, Pedestal pattern WC (excluding flushing cistern and flush pipe), including PVC seat cover complete all as specified and directed.

Supply and fix Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes, complete all as specified and directed.

Supply and fix vitreous china urinal flat back, half stall type, white with grating and union for discharge pipe including waste pipe and waste fittting, complete all as specified and directed.

Supply and fix PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, complete all as specified & directed.

Supply and fix wash hand basin, vitreous china, flat back , white of size 550X400mm, including PVC connection, CP pillar tap 15mm bore, CP waste coupling 32 mmbore, PVC waste pipe, MS angle bracket of suitable length and size embeded in wall with PCC 1:2:4 complete all as specified and directed.

Supply and fix Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fix, stop valves , cast copper alloy, chromium plated, screwed down high pressure, with any type of handle, screwed both ends for 15mm dia bore iron pipe or for brass ferrule, complete all as specified and directed.

Supply and fix brass, chromium plated towel rail 20mm dia 600mm long, complete all as specified and directed.

Supply and fix, Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed.

Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed.

Supply and fix 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 15mm bore PTMT, all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.

Supply and fix factory made solid PVC moulded door shutter, with wood free EPS core 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

Supply and fix 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

Material and labour for 150mm long aluminum handle fabricatd type anodized complete all as specified

Material and labour for 150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.

Material and labour plain cement concrete 1:3:6 type C-2 nominal mix using 40mm graded aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for internal dia of pipe 150 mm (thickness of bed shall be 15 cms), all as specified. Note(i) :- The unit rate include for use of form work. (ii) Width of bed shall be outer dia of drain pipe plus 30 cms . Haunching shall be as per MES SSR-part-I/Part-II

Material and labour RCC pipes class NP-2 150mm dia bore, with collars, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed (excavation, earthwork and PCC shall be measured and paid for separately).

Material and labour cutting into existing manholes for connecting new drains, internal dia of pipe 150 mm making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings and removal, complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Supply and fix pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.

Supply and fixing for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge

Dismantling of wall and ceiling board (fibre, pulp insulation etc) any thickness including cover fillet, snap grid etc and removing from site complete all as specified and directed

Material and labour, preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour, preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, including complete removal of existing treatment complete all as specified and directed.

Material and labour, preparation of old decorated wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : (i) Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original surface and nothing extra shall be paid on this account. (ii)Unit rate is inclusive of cutting chases in wall /foor/PCC for sunken box and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 95 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed

All as per serial item 95 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 95 herein before but for one light / buzzer/bell/ entry exit point controlled by two way switch complete all as specified and directed

All as per serial item 95 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Supply & fixing switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed.

Supply & fixing switch modular type (ISI marked), single pole, one way 6 Amps, one module, two way (ISI marked), complete all as specified & directed.

Supply & fixing switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed.

Supply & fixing socket shutters outlet 2 in i pin 6 Amp modular type multi purpose combined two module (ISI marked), complete all as specified & directed.

Supply & fixing socket shutters outlet 2/3 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed.

Supply & fixing modular switch type stepped fan regulator, single pole, 230 volt two module all as specified and directed.

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply & Fixing for sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 10 way double door with 200 Amps rated copper bus bar and blank plate as required complete all as directed.

Supply & Fixing for MCB ,SPN , 240 volt, 40 Amps to 63 Amp 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge.

Supply & Fixing for MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply and fixing indoor decorative extruded aluminium anodized housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaries' (LED batten shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 4 feet (appx) size, high efficiency electronic driver, system wattage not more than 20 watt (lumen output not less than 2000 lumen), power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glare free, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm complete all as specified and directed. Notes:-l. The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report of LED chip used. 2. The contractor shall also submit test report from the manufacture to comply with all requirements and specifications given in the contract. 3. The product not complying with contract specifications will be rejected and contractor or the manufacturer will have no claim on account of rejection of his material /product on this account. 4. The contractor shall submit warranty certificate from manufacturer for minimum 1 year.

Material and labour for new generation recess mounting luminaire (2'x2') -36 watt, with high brightness SMD LEDs as light source, suitbale for Armstrong /Modular/ POP/ Gypsum ceiling with LEDs with all electric connection, cutting hole of required size in POP / false ceiling and making good the disturbed surface and taking down existing any type fitting complete all as specified & directed. Make : C&S/SURYA/ HAVELLS

Supply and fix ceiling fan 1400mm sweep , 240 Volts , optimum performance double ball bearing fixing alongwith provn of hold fastener, hook of proper size etc complete and necessary welding arrangement in ceiling and connecting up with regulator complete all as specified and directed. Make : USHA/BAJAJ/ HAVELLS/KHAITAN/CROMPTON

Supply and fix metallic body exhaust fan 300mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 900 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's / BAJAJ/Crompton/Khaitan

Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge.

Supply and fixing sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 240 volts, 20 Amps, 10 KA, 'C' Curve complete all as specified and directed

Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces as per existing surfaces including taking out old unserviceable sub main wiring complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 4 sqmm and one single core of 04 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces as per existing surfaces including taking out old unserviceable sub main wiring complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 6 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Material and labour RCC (M-25 design mix, using 20mm graded crushed stone aggregate) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour RCC (M-25 design mix, using 20mm graded crushed stone aggregate) walls, retaining walls,basement walls, ballastwalls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed (reinforcement shall be measured and paid for separately).

AAR KAY ENTERPRISES

singh traders

Mirai Designs & Constructions

M/S Dhanpati Construction

VRIDHI ENTERPRISES

M/s Super Trading Corporation

shree balaji builders

MS R G ENTERPRISES

M/S Trilok chand sharma