Renovation of Electrical installation/ wiring/ fan fittings etc in TE Mahanagar, Lucknow

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium steel conduit as required.(a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

(b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

© 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

SITC of 4'-20 watt LED batten fitiing mounted directly on ceiling/wall i/c connection with 1.5 sq. mm copper conductor single core cable etc. as reqd. (M/s Havells/ Anchor / SS make)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with onnections, testing and commissioning etc. as required.(a) Single pole

(b) Triple pole

© 40A DP Isolator

(d) 100A isolator 4 pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.(a) 100 A, 16 KA,TPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).(a) 6 way , Double door

(b) 8 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).(a) 4 way (4 + 12), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (suitable for MCCB incomer ) as required. (M/s Havells/ HPL / SS make).(a) 4 way (8 + 12), Double door

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Dismantalling of old and damaged wiring i/c PVC holder, CR, old switch board,5A/15A switches,5/15A sockets,DB,MCB's etc complete as reqd.

Rewinding of existing burnt ceiling fan / wall mounted fan / 300 mm Ex. fan ,oiling,greasing , connection & testing etc as reqd

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.(a) 12 Module (for Computer)

(b) 4 Module (125mmX75mm) ( for Power Point)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(a) 15/16 A switch

(b) 6 pin 15/16 A socket outlet

© Modular Electronic Fan Regulator

(d) 5/6 A switch

(e) 3 pin 5/6 A socket outlet

(f) 6 A /16 A Heavy Duty shuttered socket

(g) 25 A SP C MINI MCB

(h) Plug top 15A

Providing following PVC insulated and PVC sheathed / XLPE Aluminium Conductor armoured power cable of 1.1 KV grade of following size on wall surface as required. (a) 4 X 16Sq. mm Al. Condr. Cable

(b) 3.5x 25 sqmm Al. Cond. Cable

© 4 X 10Sq. mm Al. Condr. Cable

Supply and making end termination with brass compression gland and al. lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium Conductor 1.1 grade as reqd.(a) 4 X 16Sq. mm Al. Condr. Cable

(b) 3.5x 25 sqmm Al. Cond. Cable

© 4 X 10Sq. mm Al. Condr. Cable

SITC of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

S/Fixing of 400mm sweep wall fan i/c making connection etc complete as reqd (M/s Havells/Bajaj/ Crompton/ SS make)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. (existing fan)

Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)

Supplying and laying of following size flexible PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable i/c making connection etc as reqd. (M/s Havells/Anchor/ SS make) . (a) 2x1.5sqmm

(b) 3x1.5sqmm

© 3x2.5sqmm

Suppply and replaceing of Capacitor suitable for ceiling fan i/c making connection etc as reqd. (ISI marked)

Supllying and fixing of following sizes of PVC casing caping etc complete as reqd.(a) 20mm

Supply and fixing of 20mm dia steel flexible pipe i/c necessary coupler etc as reqd

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying/replacing and fixing 18watt round recess type LED fitting having 180mm dia (NS)including connection etc as required (Make Philips/Havells or SS).

Supplying and fixing suitable size fan hook i/c minor civil work etc complete as reqd

Supplying and fixing/ Repairing of following in existing fauty Fl tube fitting including connection etc as required. (a) 4' 36W Fl lamp (ISI marked)

(b) Electronic ballast suitable for 4' 40 fl fitting (ISI marked)

© Dressing of loose wiring, necessary repairing etc in existing fl fittings

Pdg & fixing 200mm sweep fresh air fan (fibre body) with fibre body housing/ front louvers i/c making suitable cutout in size/ fixing etc complete as reqd. (M/s Havells/Bajaj/ Crompton/ SS make)

Supplying and installing 150 mm width X 50 mm depth X 1.6 mm thickness size perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

Laying/Relaying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 35Sq.mm on wall surface as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.(a) 5/6 amps switch

(b) 15/16 amp switch

(c)3 pin 5/6 amp socket outlet

(d) 6 pin 15/16 amp socket outlet

(e) Two module Step fan regulator (M/s Havells/Bajaj/ Crompton/ SS make)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (a) 2 x 1.5 sq. mm

(b) 3 x 1.5 sq. mm

© 4 x 1.5 sq. mm

(d) 6 x 1.5 sq. mm

(e) 2 x 4 sq. mm

(f) 3 x 4 sq. mm

(g) 4 x 4 sq. mm

(h) 6 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(a) 20mm dia

(b) 25 mm dia

Rewinding of existing burnt ceiling/Exhaust fan with the copper winding wire, oiling, greasing i/c dismentalling and reinstallation connection/ testing etc complete as reqd. (a) 1200/1400 MM Ceiling Fan

(b) 450MM Exhaust Fan

Supplying/ fixing of 200A capacity bus bar chamber with aluminium bus bars in 1.6mm thick sheet steel enclosurewith provision of tapping points for use on, 3 phase, 4 wire, 415 volts, 50 Hz, A.C. supply including installation accessories etc. as required.

Supplying and fixing of following sizes of medium class CPVC/UPVC pipe along with accessories (bends, socket etc) in surface/recess including cutting the wall and making good the same in case of recessed pipe as required.(a) 20mm dia

(b) 25 mm dia

S/F 20mm (NS) size wire braided PVC flexible drain pipe etc complete with connection etc as reqd.

Pdg & fixing power strip 6Amp capacity with single switch & 4nos shuttered universal socket with inbuilt fuse, LED indication lamps etc complete as reqd. (M/s Anchor/ SS make). (a) 1.5 mtr cable length

(b) 4 mtr cable length

Pdg & fixing 10mm thick novapan board in existing opening in false ceing i/c cutting in size complete as reqd.