Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.3 LAccepted-AOC 15 BOH ROAD DEFENCE ENCLAVE AMBALA CANTT 133001 HR | AMBALA | HARYANA | 133001 | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹40.7 L+₹37,559.20 (0.93%)Rejected-AOC PLOT NO 60 PHASE II HOUSING COLONY DISTT UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-AOC OK | |
| 3 | L3₹41.6 L+₹1.3 L (3.29%)Rejected-AOC C O EROS PALA EAST LABAN ROAD SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L3 | Rejected-AOC OK | |
| 4 | L4₹42 L+₹1.7 L (4.28%)Rejected-AOC | L4 | Rejected-AOC OK | |
| 5 | L5₹42.3 L+₹2.0 L (5.04%)Rejected-AOC 94 PHASE II HOUSEING COLONY UDHAMPUR J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-AOC OK |
Tender Value
₹42.4 L
EMD Value
₹84,740
Closing Date
7 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY DHAR ROAD
GE ARMY DHAR ROAD
ADDN/ALTN OF BLDG NO P 01 AND T 53 OF HQ 611 I AD BDE AT DHAR ROAD GARRISON UNDER GE ARMY DHAR ROAD UDHAMPUR
2024_MES_649756_1
8070/NIT-01/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE ARMY DHAR ROAD
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE ARMY DHAR ROAD
₹84,740
Yes
20 Sept 2024
9 Apr 2024
9 May 2024
10 Apr 2024
7 May 2024
24 Apr 2024
Amount
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Material and labour for Point wiring complete (for simple and modular type ) with 1.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly complete all as spd and directed. Note :- cover plate with frame and box will will measured and paid separately.
One light / Exhaust Fan/Ceiling fan & One Bell/buzzer point controlled by one switch.
One switch socket outlet point 3 pin 5 Amps on Independent board.
One switch socket outlet point 3 pin 5 Amps on same board.
Material and labour for Point wiring complete (for simple and modular type ) with 2.5 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit Medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 2.5 sqmm for earth continuity conductor and connected to common earth dolly complete all as spd and directed. Note :- cover plate with frame and box will will measured and paid separately.
Material and labour as in repair for sub main wiring with two single core PVC insulated unsheathed copper conductor cable 6 sqmm drawing in and including rigid non metalic PVC heavy duty 25 mm dia conduit concealed on wall/surface on ceiling with one additional PVC wire of copper conductor of 6 sqmm for earth continuity conductor incl taking down old Unsv submain any type and size and making good the disturbed surface complete all as specified and directed by Engr-Incharge
S&F as in repair Angle lamp holder fixed on wall /ceiling all as specified and directed by Engineer-in-charge.
S&F as in replacement Bulk Head fittings 12/15 watt on wall complete all as specified and directed by Engineer-in-charge.
Supply and fixing LED 9 Watt lamp , 240 Volt, 50 Hz lamp complete all as specified and directed by Engineer-in-charge.
Supply and Fixing LED 20 Watt light fitting Batton integrated LED channel, integral sleek extruded polycarbonate LED Channel with white acrylic cover and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories incl taking down complete all as specified and directed by Engr-in-Charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-charge.
Supply and Fixing fancy light 12/15 Watt light fitting including connecting up with twin core twisted flexible copper conductor cable with suitable size complete with all accessories incl taking down complete all as specified and directed by Engr-in-Charge.
Supply and fixing of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection incl taking downcomplete all as specified and directed by Engineer-in-charge.
S&F 1.5m long 40mm bore light grade GI pipe bracket duly cut to size and bent to shape required duly painted with 2 coats of aluminium paint (of approved tint) over a coat of red oxide primer, including suitable 2 Nos. Clamps as required to fix on concrete / steel poles incl taking old unsve GI bracket any type and size complete all as specified and directed by Engineer-in-charge.
Taking down carefully existing ceiling fan any type and size , removing its fan blade and deposited in MES store for safe custody all as directed by Engr-in-Charge
Taking down carefully existing Exhaust fan any type and size and deposited in MES store for safe custody all as directed by Engr-in-Charge
Taking down carefully existing Electric Water Heater (Geyser) any type and size and deposited in MES store for safe custody all as directed by Engr-in-Charge
Taking down carefully old Energy meter any type and any capacity and deposited to MES E/M store yard compete all as directed by Engr-in-Charge.
Refixing /Hanging of existing serviceable ceiling fan any size after completion of plaster/painting works incl servicing, replacement of spares in order to make it serviceable, incl rubber real, cottor pin & split pin etc, painting of fan complete from MES store yard along with new connection wire 3 core and new clamp properly,complete all as specified and directed by Engineer-in-charge.
Refixing of existing serviceable exhaust fan any size from MES store yard incl servicing, replacement of spares in order to make it serviceable, painting of Ex fan complete with new connection wire 3 core after completion of plaster/painting work and new clamp properly complete all as specified and directed by Engineer-in-charge.
Refixing of old repairable/ serviceable geyser including carrying out necessary repairs after servicing and replacement of defective spares if any in order to make it in good working condition, alongwith fastener including testing and painting geysers , connection with PVC complete all as specified and directed by Engineer-in-charge.
S&F ventilating fan AC single phase 230 volts for size 250 mm sweep plastic body along with louvers, including fixing arrangement including nut, bolts, washer etc, with necessary eletric connection with suitable copper wire from ceiling rose complete all as specified and directed by Engineer-in-charge.
Refixing of Energy Meter any type and size (meter to be collected from MES store yard) and making connection, complete all as spd and directed by Engr-in-Charge.
Material and labour for making hole in the existing brick wall without damaging the structure suitable for accommodating 300 mm Ex fan and make good the disturbed suface by cement/mortar complete all as spd and directed by Engr-in-Charge.
S/F Call Bell AC 230 V Single Pole along with necessary electric connection complete all as specified and directed by Engineer-in-charge.
S&F ceiling rose, surface bakelite, 65mm Dia, three terminals complete all as specified and directed by Engineer-in-charge.
Supply and fix Modular switch 1 way 6A,1 module complete all as specified and directed by Engineer-in-charge.
Supply and fix Modular switch 1 way 16A,1 module complete all as specified and directed by Engineer-in-charge.
Supply and fix Modular Bell push 6A 1 module complete all as specified and directed by Engineer-in-charge.
Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-charge.
Supply and fix Modular Socket 6A/16A - 2/3 pin combined 2 module,complete all as specified and directed by Engineer-in-charge.
Supply and fix Modular Fan step regulator, 120W - 2 module complete all as specified and directed by Engineer-in-charge.
supply and fix white cover plate with frame, 1 module complete all as specified and directed by Engineer-in-charge.
supply and fix white cover plate with frame, 2 module complete all as specified and directed by Engineer-in-charge.
supply and fix white cover plate with frame, 3 module complete all as specified and directed by Engineer-in-charge.
supply and fix white cover plate with frame, 4 module complete all as specified and directed by Engineer-in-charge.
supply and fix white cover plate with frame, 6 module complete all as specified and directed by Engineer-in-charge.
supply and fix white cover plate with frame, 8 module complete all as specified and directed by Engineer-in-charge.
Supply and fix modular Metal flush box 1 & 2 module complete all as specified and directed by Engineer-in-charge.
Supply and fix modular Metal flush box 3 module complete all as specified and directed by Engineer-in-charge.
Supply and fix modular Metal flush box 4 module complete all as specified and directed by Engineer-in-charge.
Supply and fix modular Metal flush box 6 module complete all as specified and directed by Engineer-in-charge.
Supply and fix modular Metal flush box 8 module complete all as specified and directed by Engineer-in-charge.
Supply and fixing socket outlet 5 Amp 230 volt ISI Mark complete all as specified and directed by Engineer-in-charge.
Supply and fixing Switch , single pole, one way 5 Amp 230 Volt ISI Mark complete all as specified and directed by Engineer-in-charge.
Supply and fixing socket outlet 16 Amp 230 volt ISI Mark complete all as specified and directed by Engineer-in-charge.
Supply and fixing switch , single pole, one way 16 Amp 230 volt ISI Mark complete all as specified and directed by Engineer-in-charge.
Supply and fixing as in repair Metal clad socket outlet with single pole and nuetral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amps complete all as specified and directed by Engineer-in-charge.
Supply and fixing VTPN Distribution Box double door of protection grade IP 42, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way,vertical incl MCCB 4 pole 160 Amp ,16 KA breaking capacity , including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed by Engineer-in-charge.
Supply & Fixing SPN DB 12 way , double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar complete incl taking down old UNSV DB any type and size complete all as specified and directed by Engineer-in-charge.
Supply & Fixing SPN 8 DB way , double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar complete incl taking down old UNSV DB any type and size complete all as specified and directed by Engineer-in-charge.
Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed by Engineer-in-charge.
Supply & Fixing MCB SPN 40-63 Amps 440 volts, AC , 10 KA breaking capacity 'B' Series,"ISI marked complete all as specified and directed by Engineer-in-charge.
M&L as in repair for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe light grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately). Note - Excavation, earth work, earthtest point, PCC for earthing pit and earth pit cover will be measured and paid separately.
Supply and fix LED Mirror wall light fittings 10/9 Watt, 240 Volt, 50 Hz complete all as specified and directed by Engineer-in-charge.
Supplying ,Laying and testing complete GI tube medium grade 20 mm bore with all fittings laid in trenches complete all as specified and directed by Engineer-in-charge.
Supply and Fixing of Gate valve 20 mm bore complete all as specified and directed by Engineer-in-charge.
Taking down old unserviceable GI pipe 20 mm dia complete all as specified and directed by Engineer-in-charge.
Taking down old unserviceable gate valve 20 mm dia complete all as specified and directed by Engineer-in-charge.
Dismentaling of cable XLPE Insulated cable of size 70 Sqmm 3.5Core ccomplete all as specified and directed by Engineer-in-charge.
Dismentaling of cable XLPE Insulated cable of size 10 sqmm X 2 Core complete all as specified and directed by Engineer-in-charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed by Engineer-in-charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed by Engineer-in-charge.
M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose
M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.
Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.
Demolition of Brickwork or stone/ boulder masonry, built in CM incl all quoins, arches, pillars, etc, complete all as specified and directed .
M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.
-ditto- all as per above here in but except bricks.
M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as directed.
Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.
M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per manufacturer instructions at any height etc complete all as specified and directed. (WPC will be measured and paid separately).
M&L for rendering 10 mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. .
Supply only liquid WPC
M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care Putty complete.
M & L for Preparing new plastered or unplastered surfaces of wall and applying exterior emulsion paint white or tinted over & including a coat of wall care Putty specified for external surface as per manufacturer instruction complete.
M & L for preparing new plastered surface of ceiling and applying three coats of white wash complete.
M&L for complete removal of existing treatment on walls by electrical grinder/ sand paper/ steel patti thereafter prepartion of walls by filling of holes and cracks with wall care putty, specified for external surface as required area of surface and applying two coats of exterior emulsion paint (weatherproof /Apex) over a coat of wall care Putty specified for external surface as per manufacturer instruction,scomplete.
Complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces and old plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & over a coat of wall care putty complete.
Complete removal of existing treatment, washing down and stopping painted surfaces and preparing old plastered or unplastered surfaces of wall and applying three coats of white wash complete.
M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of Cement base paint on walls complete
M&L Preparation of new plaster surfaces apply two coat of cement base paint over a coat of primer.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises as directed.
M & L for Providing and injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.
M & L for Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors all as specified .
M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing smooth and even without using extra cement all as specified and directed.
M&L for non skid ceramic coloiured tiles joint free 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:4) in floors etc complete all as specified and directed.
M & L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed
M&L for Vitrified Ceramic tiles double charged (light shade), 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.
M&L for vitrified ceramic tiles double charged (light shade) 10 mm thick (Square/ rectangular) area of each tile not exceeding 0.36 sqm as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles.
M&L Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick in CM 1:6 complete all as specified and directed.
M&L Non skid coloured ceramic tiles 7 to 8 mm thick( square/rectangular)area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, as in skirting laid on 10 mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles.
M&L for Non skid ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.18 sqm not exceeding 0.38, in floors etc. laid over 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry @ 3.00 kg per Sqm and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-Charge. (Make : Kajaria, Johanson tiles,Somany)
M&L for Non skid ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38, as in skirting laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles.
M&L for 18-20mm thick Granite (Zed-Black) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick in cement mortar (1:4) bedding including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, with and including providing nosing to edges of slab and drilling of hole for gas pipe using mechanical method, complete all as specified & directed. Note: Granite stone slab shall be in single piece to fit.
M&L for marble 18-20 mm (green/any colour shade approved by EIC) thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment ot match the shade to flooring / Window cills / steps,riser incl rubbing and polishing incl rounding to edge of marble and incl dismantling complete all as specified and directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and all as specified and directed.
Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 sqm each and all as specified and directed.
M&L for factory made, 2nd class H.W, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section clause 8.24 (a) suppiled and fitted to chowkats, complete all as specified and directed by Engr-in-Charge
S&F for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, prelaminated on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed.
M&L for factory made solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing and all as directed by the Engr- in-Charge.
S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per specification & drawingand as directed by Engr-in-Charge.
M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified.
M&L for pressed steel frames of size 125mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets with and including necessary fixing lugs, hinges (100mm medium weight-03 Nos on each rebate), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6, complete all as specified.
S&F for Door eye viewer, viewing angle 180 degree, mounting diameter 14mm, total size 4 x 2.5cm (LxD) with good quality glass eye lens, brass chromium plated fixed in position for door shutters, complete allas specified and directed.
S&F for door seal brush (Aluminium plate with nylon brush) of required length for any size of doors, fixed with stainless steel screw, complete all as specified and directed. Make : Harrison or equivalent.
Dismantling boarding,in wall , celling any description, fixed in any position with nails.
M&L for 18 mm thick wood plastic composites (WPC) board, 100% solid with density not less than 650 Kg per cubic meter , one side wood grain finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and directed. Note : (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid in extra.
S & F CP clip on hinges hyderolick type easy opening and close (Inset) complete all as specified and directed .
S&F stainless steel thali basket of size 550 x 600x 200mm Grade -340 all as specified and directed.
S&F in repair stainless steel telescopic channel of size300mm to 500mm long complete all as specified and directed
S&F stainless steel AISI 304 grade handle of size 75 mm long,etc. complete all as specified and directed.
M&L for new plastered surface two coat of Acrylic smooth exterior emulsion texture paint over one coat of acrlic primer incl preparation of complete all as spd and directed. Note: Colour, Design and make as approved by Engr-in-Charge.
S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate.
S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/ fixture /aluminum snap beads complete all as specified. Note: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.
M&L powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified. Note: (a)For Provn of fixing window AC , clear opening shall be divided horizontally at appropriate height / as directed by Eng-in-Charge i.e whole opening shall be divided in two portion and measurement shall be taken for clear opening i.e. out to out of window opening as a whole including all fittings and fixtures and no extra shall be paid separately . (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.
S & F for 30 mm Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised complete all as specified and directed.
S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw.complete all as specified and as directed.
S&F built in mortice latch of 100 mm size for steel almirah with two levers vertical type MS body & fixed as per sample all as specified and directed.
S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 100mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete
S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and directed.
S&F stainless steel AISI 304 grade handle of size 200mm long,etc. complete all as specified and directed.
S&F floor door stopper of stainless steel of AE SI 304 Grade body and tongue, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm complete.
S&F for Stainless steel plate rack of size 750mm x 900mm x250mm as per sample kept in GE’s office of minimum thickness of strip not less than 0.50mm, fixed in repairs, complete all as directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden new surfaces of any description over 10cm width or girth incl preparation of new surfaces complete all as specified and directed.
M & L for two coat of synthetic enamel paint over one coat of red oxide, zinc chromiume on steel surface including preparation of new steel surface width or girth exc 10cm all as specified and directed.
M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.
S&F for Sink made of stainless steel sheet not less than 0.80mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 915mm x 460mm bowl size 410mm x 330mm x160mm with and including stainless steel heavy duty waste coupling and PVC waste collapsible pipe, fixed in repairs, complete all as specified & directed.
S&F for Sink mixer with regular spout wall mounted with connecting legs and wall flanges and including all necessar fitting, complete all as specified.
S&F for Wall mixer with provision for overhead showes with 115mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed.
S&F for Chrromium plated brass Centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified.
S&F for Soap tray brass chromium plated and fixed to plugs on wall with brass screws, complete all as specified.
S&F in Repair towel Rack complete all as specified and directed.
S&F for Towel ring brass chromium plated, fixed with brass screws and plugs, complete all as specified. Make:
S&F for Corner glass shelf 200mm (brass brackets), fixed with brass screws and plugs, complete all as specified.
S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified.
S&F for PVC connections 15mm size with Brass nuts of length 600mm, fixed in repairs, complete all as specified.
S&F for Vitreous China, wash hand basin, Thin Rim Table top white matt, of size 420x420x150mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified. Make: Jaquar Cat Part No. JDS-WHM-25911 or equivalent in Make .
S&F for One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360x680x765mm, strap 220mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified.
S&F for Peg set of six, stainless steel of suitable length, complete all as specified.
S&F for Toilet paper holder,stainless steel, fixed with and including chromium plated brass screws and and wooden/plastic cleats on walls, complete all as specified.
S&F for Health faucet brass chromium plated with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified.
S&F in repair 15 mm dia brass chromium plated angle valve fancy type (quarter turn), screwed at ends including necessary extention piece and fixed complete.
S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.
S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed repair in any position incl 20 mm dia float valve with aluminium fitting, GI nipple , socket or any other fittings as reqd to fixing the tank & incl dismantling existing water tank complete all as specified and directed.
'Ditto all as per ser item No above but 500 ltr capacity complete all as spd and directed.
S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .
Taking up or down steel tubing and connections all as specified. 15 mm bore complete all as specified.
Taking up or down steel tubing and connections all as specified. 20 mm bore complete all as specified.
Taking up or down steel tubing and connections all as specified. 25 mm bore complete all as specified.
Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth.
S&F GI tubing 15 mm bore medium grade galvanised with all fittings, laid in walls, ceiling, floors, etc all as specified.
S&F GI tubing 20 mm bore medium grade galvanised with all fittings, laid in walls, ceiling, floors, etc all as specified.
S&F GI tubing 25 mm bore medium grade galvanised with all fittings, laid in walls, ceiling, floors, etc all as specified.
Taking down eaves gutters and rain water pipes (any size, material or pattern), including all fittings , heads, shoes, bends,swann necks, etc including taking out of trenches if required for cleaning or refixing or removal to store complete all as specified.
S&F 110 mm uPVC pipes Type 'B' (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.
S&F 75 mm uPVC pipes Type 'B' (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.
S&F 110 mm uPVC (SWR) Bends/ Tees/ Tapers / junction (any radius), with or without oval access door as required complete all as specified and directed.
S&F 75 mm uPVC (SWR) Bends/ Tees/ Tapers/ junction (any radius), with or without oval access door as required complete all as specified and directed.
S&F in repairs uPVC multi floor trap with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.
S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for any bore and any type of pipes complete.
Taking down existing tarfelt including mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part there of).
M&L for rendering 15mm thick in CM 1:4 on of brick work or concrete surface incl Brushing neat cement slurry with 3.0kg of cement per sq. metre finish ever and smooth (w/o using extra cement) incl WPC as per user manual at any height etc complete all as specified and directed. (WPC will be measured and paid separately).
M & L for APP polymeric water proofing membrane minimum 3 mm thick and wieghing not less than 3.0 Kg per Sqm , black finish reinforced with non woven polyester matt with a thermo fasable finish laid over bitumen primer @ 0.50 Kg/Sqm by torching application with a propane or a butrane gas torch with an overlap of 100mm at the sides and 150 mm at the ends, as per manufacturers instructions complete all as specified and directed by Engr-in-charge.
M&L for preparation of roof surface and applying two coats of reflective bituminous aluminium paint over membrane complete all as specified and directed by Engr-in-charge.
M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) for roof pedding, finish even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge
M&L for providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) of approved design/pattern to flat surfaces incl all necessary MS frame work, 12 mm thick board and fittings as per standard practice and as per manufacturer's instrs reinforced with GI wire mesh incl dismantling of walls and ceiling board any type complete all as specifed and directed.
S& F for False ceiling with Gypsum based ceiling tiles and frame work (with aluminium foil on one side) of size 595mm x 595mm of thickness not less than 9mm including with GI powder coated frame angle/tee grid frame work for ceiling with following specifications & incl disamntling ceiling board any type etc :-(a) Bottom Tee- 25mm x 25mm, 1.0mm thickness (b) Cross Tee- 25mm x 25mm, 1.0mm thickness .(c) Wall angle- 25mm x 25mm, 1.00mm thickness (d) 1.imm dia GI wire suspenders alonwith adjustable clamps to maintain levelling in cluding fixing to ceiling fasteners as per manufacturers instructions.(e) Rest all as directed by the GE Make: Vinyl TOUCH of LaGyp or equivalent in Make as per Appx `E' to Particular specification.
Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed and specified.
S&F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,eaves etc fixed with self tapping screws as specified complete all as specified as directed.
S & F for rolled sections as in main and cross beams, hip and jack rafters,truss, purlins where connected to common rafters and running rails, cleat or other connecting plates cutting, welding including Nut Bolts, Fe 410-W(Gde -E-250) quality A all as specified and directed.
S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied /welding to steel member, weight exc 4 kg per Sqm complete all as specified and directed.
Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, as directed by the Engr-in-charge.
M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for RCC Nominal mix type B1 1:2:4 (20mm graded aggregate) in landings, chajjas,shelves and similar articles with plain faces, set in cement mortar 1:4 complete all as specified and directed.
M&L for PCC (1:3:6) type C2 using 20 mm graded aggr as in surface channels/drains /mass concrete etc incl demoliton complete all as directed and specified.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping/benching/ filling in hold fast, pressed steel frame and all other similar works including necessary formwork complete all as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.
M&L for RCC 1;2;4 (using 20mm graded agg) pre-cast cover slabs, shelves and similar articles complete all as directed and specified.
M&L for TMT Bar 10mm dia and over cut to length bend to shape required incl cranking, bending sprilly for hooping colmns hooking ends and binding with and incl MS wire (Anneled) not less than 0.9mm dia or securing with clips
S&F mild steel TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders.
Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level , concrete debris and rubbish to a distance n exc 100m as directed by the EIC.
M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base all as specified and directed.
M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area complete all as specified and directed.
M&L cloured Chequered cement concrete tiles 25cmX25cmX 25mm thick. with rubber finished and Clour pigment, set, jointed and pointed in neat cement slurry in floors,laid over15mm thick screed bed in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.
M&L for machine pressed precast concrete interlocking paver block of 60mm thickness, any shape and size confirming to IS 15658 -2006 with grey cement, pigment complete all as specified and directed.
M & L for sand filling under floors or in foundation or as in sand coushing incl watering and consolidation complete all as specified.
M&L for Factory made Pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.
Excavating in trenchs n exc 1.5m in depth and n exc 1.5m wide for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified & as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & as directed.
Removing excavated soil material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified & as directed.
S&F for laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drainpipe 150mm bore conforming to IS at any depth after they are laid and tested complete all as specified & directed.
M&L for PCC 1:3:6 type C2 as in concrete bed to 150 mm bore drain pipe and over incl packing under haunching against the sides of pipes after pipe laid and tested complete all as specified & as directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed.
M/L cement plaster 15mm thick in CM 1:6 on brick or conc surfaces finished even and smooth without using extra cement mixed with by adding permeability reducing polymer @ 250gm/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc complete. NOTE : Rates for water proofing compound/ polymer deemed to be included in the above rates.
M &L for providing and applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete.
S&F in repairs vitreous china squatting pan white oriisa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P-trap including cement concrete bedding and making good the disturbed portion to match with the existing surface of floor,complete all as specified and directed.
S&F in repairs vitreous china ware wash down Water Closet (Pedestal) white, including white PVC seat and cover, closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, complete all as specified and directed..
supply and fixing in repairs low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white,with inlet, including brackets complete all as specified and directed.
S&F in repair Vitreous china urinal flat back, size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed
S&F in repairs for vitreous china ware Wash Hand Basin, white, flat back of size 550 x 400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length with all fittings etc complete all as specified and directed.
S&F in reparis for pillar cock 15mm bore, foam flow chromium plated, fancy type, capstan heads, screwed down high pressure all as specified and directed.
Supply and fixing in repairs brass chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union all as specified.
M&L for Providing precast cement concrete 1:2:4 type B0 louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4, complete all as specified and as directed.
S&F in repair Partition of toughned glass 8 To 10 mm Thick with cleat/clamp sami framed and frame less range. Fixed in wall or aluminum / wood . Complete all as specifed.
M/S SHUBAM ENGINEERS
S K CONSTRUCTION
RAMAN CONSTRUCTION CO
SHIVAE CONSTRUCTION
DAVINDER SINGH
ANIKET TRADERS
JINDAL BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .