REPAIR TO STEEL WOODEN AND MAP FURNITURES INCLUDING PAINTING AND POLISHING AT AIR FORCE STATION SALUA AND KALAIKUNDA UNDER GE AF KALAIKUNDA

Amount

Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polish to bringout the new serviceable condition all as specified, directed and shown on drawing:-

Table 900x900x760mm (FD-88,291)

Table top made out of 18/19 mm thick prelaminated particle board exterior grade having one side white balancing and other side mysore teak colour and providing 4mm thick teak wood beading all round incl. applying one coat of french polish over wood filler complete. Make- Green Ply/Novapan/Archid/Kitply

Leg made out of teak wood all as specified.

Top rail short made out of teak wood all as specified.

Table 900x600x760mm (FD-224/223)

Table top in the same position as per existing and size made out of 18/19 mm thick prelaminated particle board exterior grade having one side white balancing and other side mysore teak colour and providing 4mm thick teak wood beading all round incl. applying one coat of french polish over wood filler complete. Make- Green Ply/Novapan/Archid/Kitply

Leg made out of teak wood all as specified.

Short rail made out of teak wood all as specified.

Long rail made out of teak wood all as specified.

CHAIR EASY (FD-17M & FD-229)

Front leg in the same position as per existing shape & size made out of well seasoned 'Teak wood' including providing hard rubber shoes fixed with screws at the bottom of the leg Complete all as specified and as directed by Engr -in-charge.

Rear leg made out of teak wood all as specified.

Side Rail of back frame with necessary hole for canning, made out of teak wood all as specified.

Front Rail of seat frame with necessary hole for canning, made out of teak wood all as specified.

Rear Rail of seat frame with necessary hole for canning, made out of teak wood all as specified.

Back rest complete with necessary hole for canning, made out of teak wood all as specified.

Arms complete made out of teak wood all as specified.

Stiffener complete made out of teak wood all as specified.

CHAIR DINING (FD-16M & FD-279,FD/map-II/04) :-

Front leg from its position and S&F new front leg as per existing shape & size in the same position made out of well seasoned 'Teak wood' incl. hard rubber shoes complete i all as specified and as directed by Engr -in-charge.

Rear leg made out of teak wood all as specified.

Side rails of seat with necessary hole for canning, made out of teak wood all as specified.

Front rails of seat with necessary hole for canning, made out of teak wood all as specified.

Rear rails of seat with necessary hole for canning, made out of teak wood all as specified.

Back rest complete made out of teak wood all as specified.

Stiffener complete made out of teak wood all as specified.

Peg Table(FD-277/384/236) :-

Table top made out of 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of 1st class teak wood free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing.

Leg made out of teak wood all as specified.

Side frame short rail made out of teak wood all as specified.

Side frame long rail made out of teak wood all as specified.

Table centre(FD-274,235,375) :-

Table top made out of 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 2nd class hard wood of species TITACHAMPA/BONSUM/HOLLOCK free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over including a coat of pink primer complete all as specified & as directed and as shown on drawing.

Leg made out of teak wood all as specified.

Side frame short rail made out of teak wood all as specified.

Side frame long rail made out of teak wood all as specified.

Table Dining for 6 persons(FD-239/273) :-

Table top made out of 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with width equal to thickness of board of teak wood free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as specified & as directed and as shown on drawing.

Leg made out of teak wood all as specified.

Top rail short made out of teak wood all as specified.

Top rail long made out of teak wood all as specified.

Bed Hard Wooden (FD 213/212/245/246) :-

Foot rest portion of Bed Hard and 3.5/4mm thick one side teak faced and other side commercial BWR ply wood alongwith replacement of unserviceable wooden legs with well seasoned 1st class teak wood and providing readymade 30x4mm teak wood beading complete all as per DRG (FD-246) complete all as per specified and directed by Engr-in-charge.

Head rest portion of Bed Hard and 3.5/4mm thick one side teak faced and other side commercial BWR ply wood alongwith replacement of unserviceable wooden legs with well seasoned 1st class teak wood and providing readymade 30x4mm teak wood beading complete all as per DRG (FD-246) complete all as per specified and directed by Engr-in-charge.

Long rail made out of teak wood all as specified.

Head board and foot board of Bed Hard and S&F of new plywood with one side teak faced and other side commercial BWR to shape & size including provision of teak wood beading of size 30x4mm without disturbing to the teak wood frame complete all as directed by Engr-in-charge.

Ply wood top from bed Hard S&F new plywood 12mm thick BWR plywood 7 ply ISI Marked confirming to IS-303 of size 1840x910mm complete all as per Drg (FD-245/246) or specified and directed by Engr-in-charge.

Teapoy ( FD-34,232,278,382 ) :-

Table top made out of 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 1st class hard wood complete all as specified & as directed and as shown on drawing.

Leg made out of teak wood all as specified.

Side frame short rail made out of teak wood all as specified.

Side frame long rail made out of teak wood all as specified.

Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polish to bringout the new serviceable condition all as specified, directed and shown on drawing:-

Table Writing (1145x600x760mm) with drawer (FD-33(M)/275/249) :-

Table top made out of 18 mm thick pre-laminated particle board made to shape and size duly finished and polished complete and providing teak wood beading all round incl. applying one coat of french polish over wood filler complete as shown on drgs (FD-33(M)/275/249) as specified and as directed by Engr-in-charge.

Leg made out of teak wood all as specified.

Short rail made out of teak wood all as specified.

Long rail made out of teak wood all as specified.

Side board FD-26(M) /FD-241 :

Leg made out of teak wood all as specified.

Doors made out of 18mm thick Commercial plywood BWR grade for with locking facility duly provided with 5 mm T/W edging alround and fixed with piano hinges of suitable size

Back (outside) made out of 6mm thick commercial ply, veneer shade

Sides made out of 18mm thick Commercial plywood BWR grade

Top/bottom (Outside) made out of 18mm thick Commercial plywood BWR grade

Knobs for drawer

Table Dresssing Gents (FD - 230/379) :

Mirror of 5 mm thick and 6 mm thick plywood for back complete and as specified.

Drawers as per drawings

Eye hook

Chair Dining (FD/MAP-II/05) :

PVC seat of approved quality as specifed and directed by Engr-in-charge.

Table Dressing Ladies ( FD-265) :-

Mirror as per Drg as specified and directed by Engr-in-charge.

Taking old worn out/damaged existing cane from all kinds of chairs i.e. Chair Easy FD, Chair Easy JCO's, Chair dining, cleaning of caning holes without damaging the furniture & recanning of the same with white coloured new cane of 2mm width plastic half oval shape cane best quality beading with 4mm width plastic half oval shape cane (Godrej pattern) as shown in drawing.

S & F of new Foam Cushion of size 533x560x100mm thick, 32 density for seat and back of Sofa set 5 seater & 4 Seater duly covering with inner cover with new marking cloth superior quality and new tapestry cloth on top as outer cover chain type and cost of tapestry cloth not less that Rs 350/- Per Meter (Make Sleepwell) as approved by GE complete all as per Drg (FD-281/373) and as directed by Engr-in-charge.

S & F of new Foam Cushion of Chair Dining MAP of size 450x400x75mm thick, 40 density for seat of duly covering with new tapestry cloth on top as outer cover chain type and cost of tapestry cloth not less that Rs 250/- Per Meter (Make Sleepwell) as approved by GE complete all as per Drg (FD/MAP-II/04) and as directed by Engr-in-charge.

Supply of new tapestry cloth cover for 100 mm thick cushions of size 560x530mm x40 Dencity for seat/back of approved quality with zip facility (tapestry cloth not less than Rs. 250/- per RM) of approved quality and shade duly stitched as specified and directed by Engineer in charge (FD - 281/373)

Complete removal of total existing painting/polish and applying two coats of high gloss polyurethane enamel paint (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss)by spray painting method over and including a coat of pink primer and prepration of surfaces Complete all as specified and as directed for the following furnitures :-

Bed hard Drg No (FD-246)

Chair Dining , Drg (FD-279)

Chair Easy , Drg (FD-229)

Chair writing , Drg (FD-220)

Sofa set 4 and 5 seater , Drg (FD-373/281)

Side Board , Drg (FD-241)

Teapoy , Drg (FD-382)

Stool dressing , Drg (FD-398)

Peg Table, Drg (FD-273)

Table dressing Gents, Drg (FD-230)

Table dressing ladies, Drg (FD-230)

Table Centre, Drg (FD-274)

Table 900x900x600MM without drawer, Drg (FD-284)

Table 900x600x600mm with drawer, (FD-285)

Table Writing, Drg (FD- 33(M)/275/249 )

Taking down carefully existing unserviceable top of following tables and replacing the same with 18/19mm thick Medium Density Fibre board (MDF) exterior grade ISI marked (IS:12406-2003) with exposed face covered with 1mm thick decorative laminates Type-I ISI marked (IS:2046-1995) of surface finish colour and pattern as approved, affixed with synthetic glue and exposed edges provided with 4mm thick edging with widht equal to thickness of board of 1st class hard wood free from all defects and with exposed wood surface painted with two coats of high gloss polyurethane enamel paint over a coat of pink primer complete all as per drawings and as directed Engineer-in-Charge:-

Table Office officer steel (FD-1002,1003,& TP)

Table office clerk steel as per drawing FD - 4,307,381, 1004,& TP

Table 900x900x760mm (FD-88,291)

Table 900x600 mm with drawer(FD-223/283)

Removing/taking out carefully old unserviceable worn out/components parts of the following steel/TP furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-

Table office officers and Table office clerk steel (FD-1003 & 1004) :-

Material and Labour for repairable parts and taking out of repairable table drawers and refixing on existing position. Removing the dents and bends,welding /riveting the damaged portion and rectifying the smooth movement of the drawers. as shown on drawing and as directed by Engr-in-charge.

Drawers made out of 1.00mm thick PBI sheet including necessary run welding, preparation of surfaces, one coat of red oxide zinc chrome primer to receive paint complete as per drawings.

6 lever brass chromium plated lock with keys in duplicate

Chair CB steel without Arm (FD-75M) :-

Seat frame made out of 2nd class hard wood duly caned with white plastic cane 2mm wide for seat and 3mm wide for border as per Godrej pattern Cane, Type-I (HDPE) as per IS: 5378-1994 and applying two coat of black French polish with glossy finish over wood filler on all exposed new wooden surfaces after preparation of new wooden surface complete over a coat of primer before canning complete all as shown on drawing as specified and as directed by Engineer-in-Charge.

All as per item No 9.21 but back frame of chair CB steel without arm. Complete all as directed by Engineer-in-Charge

MS cleats of flat iron of size 25x3mm with drilling holes including SS screws to fix seat and back frame of each chair frame to support to seat/back wooden frame including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

25mm width, 16 gauge 460mm long flat iron for support between the seat and back frame including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

Chair CB steel with Arm (FD-75M)

Seat frame made out of 2nd class hard wood duly caned with white plastic cane 2mm wide for seat and 3mm wide for border as per Godrej pattern Cane, Type-I (HDPE) as per IS: 5378-1994 and applying two coat of black French polish with glossy finish over wood filler on all exposed new wooden surfaces after preparation of new wooden surface complete over a coat of primer before canning complete all as shown on drawing as specified and as directed by Engineer-in-Charge.

All as per item No 9.31 but back frame of chair CB steel without arm. Complete all as directed by Engineer-in-Charge

Hand rest made out of 20 mm thick teak wood plank in one piece on hand rest and applying two coat of black French polish with glossy finish over wood filler on all exposed new wooden surfaces after preparation of new wooden surface complete over a coat of primer before canning

MS cleats of flat iron of size 25x3mm with drilling holes including SS screws to fix seat and back frame of each chair frame to support to seat/back wooden frame including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

25mm width, 16 gauge 460mm long flat iron for support between the seat and back frame including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

Chair revolving high back/Medium back (TP)

Wheel base of trade pattern as per existing shape and size of trade pattern

Hydrolic System (Air Soft) premium quality for chair revolving/Chair computer

Seat of Chair Revolving Executive/Computer chair all as per drawing & as directed. Note: Seat Shall be fixed over 12mm thick Hot Pressed plywood commercial and shall be upholstered with superior quality tapestry and moulded polyurithane foam 75mm thick of 50 density with PVC Lipping all round, cloth of approved shade, texture and premium quality) .

Back of Chair Revolving Executive all as per drawing & as directed by Engr -in-charge. Note: Back Shall be fixed over 12mm thick Hot Pressed Plywood Commercial and shall be uplolstrered with superior quality tapestry and moulded polyurithance foam 25mm of 50 density and shall be disigned with contour lumber support for Extra comfort with PVC Lippling all round, cloth of approved shade, texture and premium quality.

Armrest for Chair revolving high back/Computer chair as per Shape and size or directed by Engr-in-charge.

Almirah large steel with shelves/ Almirah medium steel with shelves/Locker bed side steel

CP brass handle best quality as approved by GE as per drg (FD-1031,1032 & TP) and as directed by Engr-in-charge.

6 lever brass chromium plated lock with keys in duplicate and make it smooth functional as per drg (FD-351,1031,1032,1028,1029 & TP)

MS clamps for shelves made out of 16 gauge MS sheet.Rest all as per drg (FD-351,1031,1032 & TP) including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

MS hinges for doors best quality. (FD-351,1031,1032 & TP) including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

Leg made out of 20 guage (1 mm) plain black steel sheet (PBI sheet) fixed by run welding as per drg (FD-351,1031, & TP) including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

leg made out of 20 guage (1 mm) plain black steel sheet (PBI sheet) fixed by run welding as per drg (FD-1032,1029 & TP) including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

Locking device for 6 lever steel lock suitable for Almirah large steel as approved complete all as per drg (FD-1031& TP) including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

Locking device for Almirah medium steel for 6 lever steel lock as approved complete all as per drg (FD-1032 & TP) and as directed by Engr-in-charge including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint

Shelves for Almirah large steel as per existing shape and size made out of 20 guage plain black steel sheet (PBI sheet) including preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint complete all as specified and as directed and shown on drg (FD-1031 & TP).

Shelves for Almirah medium steel as per existing shape and size made out of 20 guage plain black steel sheet (PBI sheet) iincluding preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint complete all as specified and as directed and shown on drg (FD-1032 & TP).

Table Computer (FD/E6/MAP/03 & TP) :

Keyboard tray made out of 18mm thick prelaminated paricle board to match with the original as shown on drawing

Telescopic channel for keyboard tray/Drawer to match the original complete all as specified and as directed.

Tightening of loose and shaky joints of the main frame with metal L clamps

PVC beading

M&L for Repairs to Steel door/ shutter with necessary cutting in square /rectangle in shape for Almirah large steel and Almirah medium steel by providing 20 G (1 mm) plain black sheet (PBI sheet) fixed by run welding of required length as per existing size & shape iincluding preparation of surfaces and applyone coat of red oxide zinc chrome primer to receive paint complete all as specified and as directed and shown on drg (FD-1031,1032, & TP).

Chair verandah steel (FD-19/256/359) : Taking out existing unserviceable cane and weaving the same with plastic cane 4 mm wide half round of approved quality duly applying Two coat of synthetic enamelled white paint of approved quality to the steel surfaces of chair before canning. NOTE :- (i) Canning shall be done in "GODREJ PATTERN" (ii) The cane shall be of"AJAY/MPI/SHAH GARWARE/Premier/AARYAN or equivalent"

Taking out the old unserviceable plywood from charpoy GI pipe with hard top and S & F new ply wood 12mm thick with 7 Nos of ply wood commercial grade BWR type of required shape and size fixed with new screw to rail complete all as specified and as directed and as shown on drg. (FD-220 & FD/E6/Map-II/01).

Repair to steel furniture any type with providing welding points to the joints and broken points welding points upto 10 mm sizes as under for steel furniture as various type of Almirah,Table,chair,Charpoys,Shoe Racks, Racks and Book shelves etc as directed by the Engr-in-charge. FD-75(M), 67M, 78M, 84M, 77M, 119, 1031, 1032, 1009, 1003, 1004, 1008, 1023, 1028, 1029 & TP.

All as per item No 13.00 but upto 25 mm size.

All as per item No 13.00 but upto 50 mm size.

All as per item No 13.00 but upto 100 mm size.

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY OR AS APPROVED paint both inside and outside by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :- (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE

Steel furniture Almirah Large with Shelf (Steel) (FD-1031, FD-1033, FD/E6/MAP/18)

Almirah medium steel W/shelves

Table Office Clk Steel

Table Officer Office Steel

Chair C B Steel W/Arms.

Chair C B Steel without Arms

Locker Bed side steel

Rack steel adjustble 6 tire

Rack Adjustable open type

Rack Stationery steel

Table Steel 900x900x760mm

Table Steel 900x600x760mm

Book Case Steel

Shoe rack steel

Guru Charan Mahata (BID ID -3061634)