REPAIR REPLACEMENT TO FALSE CEILING ALUMINIUM UPVC DOOR WINDOW FLOORING AND OTHER MISC WORK IN OTM ACCN OF 505 ABW UNDER AGE BRI OF GE NORTH DELHI CANTT10

Dismantling of Plain or corrugated fibre sheeting of any guage as in roof covering including ridges/gutters etc of any description straight or curved at height upto 15 mtr complete all as specified and directed.

Dismantling of AC sheet / CGI sheet roof corrugated/semi corrugated of any description including ridges/gutters etc at height upto 15 mtr complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for .

Dismantling of wall and ceiling boards any thickness including cover fillets, WPC Jali, grid work complete as required and directed.

S&F Factory Made 18mm thick 100% Solid WPC Jali (Wood polymer Composite) design of Jali as approved, comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing compancy.

S&F structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angles and angle cleats or other connecting plates gde Fe-410-W at any height complete all as spd and directed.

S&F of 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) curruagated/plain sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

M&L 6mm thick Asbestos cement Sheet corrugated/semi corrugated fixed with ''L'type or 'J'type or cranked hook/bolts at height upto 15mtr all as specified and directed

S&F 2mm thick fibre glass reinforced translucent corrugated sheetings with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light complete all as specified and directed.