Shifting of tubular pole opposite station near transporting road due to deteriotion of pole by prolonged heating caused by accumulated coal in surrounding areas additionally shirting of poles due to close proximity to the overhead conductor for

Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required.

Dismantling of over head lines comprising of aluminium over head conductor(20X50X5X0.148)

Erection of metallic pole of length above 10mtr and upto 12 mtr in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required for Tensioning of Conductor where required.during changing of damaged insulators or changing of cross arms

Providing of Areial Bunched Cable PVC 50 X 35 X 16 MM2 PVC 1.1 KV Grade as required for extension of previously installed cable for controlling of lights as required due to shifting of over head line.

Erection of PVC 50 X 3, 35 X1,1 x 16 MM2 PVC 1.1 KV Grade aerial bunched cable 690 kg *.5=345 kg aerial bunched cable

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required.