SUPPLY INSTALLATION COMMISSIONING and TESTING OF FULLY AUTOMATIC BANANA CHIPS MACHINE 100 Kg HRand MULTI HEAD PACKING MACHINE 50gm to 500gm POUCH

Amount

Banana Chips Frying Line *Chips Production Capacity Banana Chips 100 Kg/Hr & Potato Chips 150Kg/Hr, *Oil in System = 650-700 Liters, Space Requirement = 50 Feet x 15 Feet X 10 Feet, *Material of Construction - Contact and Non-contact Parts* = SS 304 Only, *Electricity Type = 3 Phase 440 Volts.

Pre Feeder *Size : 6 Feet Length X 2.5 Feet Width, *MOC Contact and Non-Contact parts = SS 304, *Fryer Body Sheet Thickness = 5 MM Thickness + Insulation (4 to 6 Inch Thickness - Ceramic Fiber Blanket - 64 Density) with Cover Plate will be of 2 mm thickness

Continuous Fryer *Fryer Length = 25 Feet, *Fryer Height = 7 feet, *Conveyor Width = 24 Inches, *Fryer MOC Contact and Non-Contact parts = SS 304, *Fryer Body Sheet Thickness = 5 MM Thickness + Insulation (4 to 6 Inch Thickness - Ceramic Fiber Blanket - 64 Density) with Cover Plate will be of 2 mm thickness, *Fryer Body Sheet Thickness = 5 MM Thickness + Insulation (4 to 6 Inch Thickness - Ceramic Fiber Blanket - 64 Density) with Cover Plate will be of 2 mm thickness ,

Rotating Shafting Blade Gear Motor * Make: Rotomotive or Equivalent, *Ratio : As required, *Motor : Rotomotive or Equivalent, 3 Ph, 0.5 HP, *Class: IE3.

Top Conveyor Gear Motor Specification *Make: Rotomotive or Equivalent, *Ratio : As required, *Motor : Rotomotive or Equivalent, 3Ph, 0.5 HP, *Class: IE3, Output Conveyor Gear Motor Specification = * Make: Rotomotive or Equivalent *Ratio : As required, * Motor : Rotomotive or Equivalent, 3 Ph, 0.5 HP, * Class: IE3

Conveyer Lifting System Screw Based Mechanism, *Gear Motor = Make Rotomotive 3 HP or Equivalent

Conveyor Belt + Conveyor chain MOC *SS 304, LK 3 Model / or Equivalent, *Fryer conveyor belt chamber should be sealed from side not allowing any material to leave the conveyor area.

Teflon Coating *Teflon Should be installed vertically within fryer in a way such that it avoids direct pressure on chain of bottom conveyor., *Thickenss of Teflon (vertically installed) = 8 MM

Dia, thickness, Length and Quantity of hood chimney respectively 10 inch, 2mm , 450 mm,1

Complete Body insulation *Complete body should be insulated with Ceramic Fiber blanket, 64 Density, 4 to 6 inch thickness

De - Oiling Conveyor Belt Size : 10 Feet Length X 24 Inch Width

Cooling Fan Make - Standard as per availability

Conveyor Belt + Conveyor chain MOC *SS 304, *LK 3 Model or Equivalent

Conveyor Gear Motor Specification = *Make: Rotomotive or Equivalent, *Ratio : As required, *Motor : Rotomotive or Equivalent, 3Ph, 0.5 HP, *Class: IE3,

Oil Filter Specifications *Oil Filter Type = Continuous Belt Filter, *MOC Contact and Non Contact Part = SS 304, *Thickness = 3 mm for main body, *Tray : 2.5 mm, * Sheet on Insulation : 1.5 mm

Motor Gear *Consumption = 0.5 HP, Make: Rotomotive or Equivalent, *RPM : 1400

Vaccume Blower *0.5 HP, *RPM: 1400

Oil Storage Tank Specifications *Oil storage Tank Capacity = 1000 Ltr Capacity, *MOC = SS 304, *Thickness = 2 mm thickness, *Dimensions = 4 feet x 4 feet x 7 feet

Glass Tube fitting for level checking Glass Tube fitting for level checking

Circulation Pump & Motor Specifications *MOC: SS 304 only including all inner and outer body and parts, *Water cooled Self Lubrican

Pump *Make: JK or Equivalent, *3Ph,

Motor Motor Specification = *Make: Crompton or Equivalent 7.5 HP

Control Panel Specification *Suitable VFDs for Conveyor speed control, *Emergency Switch, *Temperature Indicator with Controller, Pump On / Off Indicators with Light, *Conveyor On / Off Indicatiors with Light, Lifting UP / Down Indicator Light, *Make -Harsha or Equivalent

Masala Mixer With Vibrator *Hopper Size:- 1.5 Feet X 1.5 Feet (SS-304), *Hooper with Sturrer, *Scarf Type Feeding Vibrator with Speed Controller, *MOC Contact and Non Contact Part = SS 304 ,

Gear Motor *Make: Rotomotive or Equivalent, *Ratio : As required, *Motor : Rotomotive or Equivalent, 3Ph, 1.5 HP, *Class: IE3,

Masala Tumbler *Size:- 8 Feet (L) X 2.5 Feet (Dia.) *MOC Contact and Non Contact Part = SS 304, *Thickness = 2 mm for main body

Gear Motor *Rotomotive or Equivalent, *Ratio : As required, *Motor : Rotomotive or Equivalent, 3Ph, 1 HP, *Class: IE3,

4 Lak KCal Thermic Heat Exchanger *Heat Exchanger Capacity = 4L Kcal, *Heat Exchanger Coil MOC = SS 304 Only *Coil Tube Grade = Schedule - 40 Seamless Pipe *Thickness Of Coil Tube = 3.33 MM, *To Provide Pressure Gauge in Circulation Line at suitable place, *Life of Coil (May change based on Maintenance) = Up to 15 Years

Modular Belt With Hopper *Belt Size : 1.5 Feet W X 7 Feet L *(Gear Motor: -Make: Rotomotive or Equivalent, Ratio : As required, Motor : Rotomotive or Equivalent, 3Ph, 1 HP, Class: IE3) *Food Grade Modular Belt PPT, *Hopper Size:- 2 Feet X 2 Feet X 2.5 Feet (With Speed Control Rotating Drum) *(Gear Motor:- Make: Rotomotive or Equivalent, Ratio : As required, Motor : Rotomotive or Equivalent, 3Ph, 1 HP, Class: IE3) * MOC Contact and Non Contact Part = SS 304

Feed Vibrator *Size:- 1.5 Feet (W) X 5 Feet (L), *Vibro Motor: - 0.5 HP (2 Nos.), *Stand In MS & Contact Part in SS 304

THERMIC FLUID HEATER *Capacity -6,00,000 KCAL , *Model- ME – VTM – 06 or Equivalent, *Max Thermic Fluid Outlet Temperature - 280°C, *Fuel - Solid Fuel / Wood/ Agro Waste / Briquette, *TOTAL CONNECTED POWER -24.5 HP, *THERMAL EFFICIENCY- 75 % + 2 %

CONVECTIVE HEAT EXCHANGER *Heat Surface area of coil - 63.83 M2, *Make Seamless ( Schedule – 40 ) or Equivalent, *Make :- MSL OR BS :3059 As Per I.B.R, *Tube Size ,48.3 mm / 50.8 mm, *Tube Thickness- 3.7 mm, *Number of Start- 3 in Convective Heat Exchanger, *Oil holding capacity of coil -552 LTR

EXPANSION TANK & DE AERATOR TANK *Capacity of Expansion Tank - 1000MM, *Thickness of Expansion Tank - 4 mm, *Thickness of side cover Expansion Tank- 8 MM

TF OIL CIRCULATING PUMP WITH MOTOR *Flow- 55 M3 / Hr, *Head - 55 Mt, *Motor- 15 H.P. x 2800 RPM, *Model- 50/20, *Make - Sujal – Air Cool / JKE – Air Cool / Equivalent

INDUCED DRAFT FAN WITH MOTOR *Motor H.P -7.5 H.P. x 1400 RPM, *Make =Harsha or Equivalent

FORCED DRAFT FAN WITH MOTOR *Motor H.P 2 H.P. x 2800 RPM *Make =Harsha or Equivalent

Banana Slicer Capacity -100 KG / HR *With Motor -2 HP, *Make -As per Available standard, *Dimensions -31x19x49 inch, *MOC SS304, *With variable speed Controller, *Make - As per Availability

Table for Receiving Section *Size 1200mm (L ) x 600mm ( W) x 750mm (H), *Table Top Material SS 304,1.2mm, *Frame material SS 304 *SQ pipe 40mmx40mm x 1mm thick and *SQ pipe 25mm x25mm x 1mm

Washing Tray for Banana Washing *Tray for banana washing with 1 inch inlet & Outlet Nozzle, *Size:- 2500mm ( L) x1200mm (W) x300mm ( H), *Sheet thickness – 2mm, *Bottom Framing in SQ Tube 25mm x 25mm x1mm

Multi Head Packing Machine (50gm to 500gm) *High Speed Servo Driven Collar Type Vertical Form Fill Seal Machine – Pillow Type Centered Seal Pouches Only with following - - One Set of Forming Part Assembly, -Poker Assembly, -Servo motors - 3, -Continuous Nitrogen, -Flushing System, -Product Catcher Assembly, -Single Pouch & Pouch, -Strip Cutting System, -Forward Reverse, -Mechanism in Horizontal , Sealing

14 HEAD COMBINATION WEIGHER WITH COLLECTION BUCKET & TOUCH PANEL *Make-Yamota, Eshida or Equivalent Etc.

MAKE SUITABLE PLATFORM ASSEMBLY WITH INCLINED LADDER SYSTEM FOR SINGLE STATION MULTIHEAD WEIGHER MOS. MS Powder Coated

“Z” TYPE ELEVATOR (CONVEYING) SYSTEM FOR PACE MACHINE WITH VIBRATORY FEEDER & HOPPER- *For Single Machine MOS. MS Powder Coated *Contact Parts SS304, *Gear Box & Motor Make-Bonfiglioli, Premium or Equivalent etc. *VFD Make – Mitsubishi ABB or Equivalent etc. *Hardened Steel (MS) Chain from Diamond

DISCHARGE / TAKE OFF CONVEYOR SYSTEM WITH VARIABLE SPEED DRIVE UNIT *MOC. SS304, *Gear Box & Motor from Bonfiglioli or ABB or Equivalent, *Belt from Forbo or Equivalent

THERMAL TRANSFER OVERPRINTER UNIT *32 mm x 47mm Printing Area With 2 Ribbons & With free Suitable Mounting Bracket

SERVO STABILIZER *2 KVA

EACH EXTRA SET OF FORMING PARTS ASSEMBLY *MOC-SS304

PSA NITROGEN PLANT *Capacity 5.5Nm3/hr and Nitrogen Purity-99.9%, *Air Screw Compressor 7.5HP, *Make Like Atlas Copco, Elgi or Equivalent

Installation Charges, Supervision Charges, Transportation cost, electrical connections, cables charges included.

VISION MANPOWER SERVICES (BID ID -6906770)

KARUNANAND HYDRO-PNEUMATIC CONTROLS PVT LTD (BID ID -6907441)