NIT No. 16 (22-23) Item No. 5

Dismantling of existing pump, motor from the base frame by cutting of rusted M.S nut bolts and foundation bolts by gas cutter set and electric welding machine, removing all the nut bolt and worm out M.S Base frame from the RCC foundation suction and delivery side by gas cutter set and electric welding set job also includes dismantling the suction & delivery side sluice valve, NRV,taper bend etc. as per side requirement and lifting of pump and motor on safe place. Breaking of RCC foundation by pneumatic power hammer chisel and electric compressor machine etc. the job includes removing the broken material from P/H and disposing the same at suitable place.

Supply of Horizontal Split casing pump for clear water applications having minimum discharge 170 m3/ hr, minimum head 40 meter with bronze impeller& neck ring, SS 410 Shaft & bronze sleeve, CI body, Pump suction/delivery size 125mmx100 mm. Make:- KBL/M&P/Jyoti/DJB Approved.

Supply of 40 HP, 3 phase AC, 1450 rpm TEFC squirrel cage induction motor with tyre/ Pin bush coupling. Complete fitted. Make:-Pump:-M&P/KBL/Jyoti/BBL/DJB approved make. Motor- KEC/Crompton/ABB/Jyoti/DJB approved make.

Supply of M.S pipe of all size.

Supply of M.S Specials of all size.

Providing and fixing bolts including nuts and washers complete.

Supply of LT power Aluminum cable, solid, XLPE, insulated PVC armored 650/1100 V-grade as per IS 7908 (Part-I) 1988 size 4CX50 Sq mm. Make:-Havells/Gloster/Granday/ DJB approved make.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 4CX50 Sqmm. (clamped with 25x3mm MS flat clamp)

Supply of rubber packing sheet. Make: Jyoti/national/any DJB approved.

Supply of NRV of size 200 mm IS: 5312 part 1 PN 1.6 Make - Kirloskar / IVC/DJB Approved

Supply of Non-Rising Sluice valve of size 250 mm, IS: 14846 PN 1.6 Make - Kirloskar / IVC/DJB Approved

Supply of Non-Rising Sluice valve of size 200 mm, IS: 14846 PN 1.6 Make - Kirloskar / IVC/DJB Approved

Making of RCC foundation of size 1750 mm X 750mm by 1:2:4 concrete for M.S. base including providing fixing of 6 nos. foundation bolt of size 20mmX600mm.

Fixing of new M.S. base frame made of M.S. channel heavy duty of size 100 mm x 50 mm complete with Fixing the M.S. base frame on the RCC foundation the job includes proper leveling and alignment. Installation of the pump set as per original position with proper alignment and also making of all electrical connections, fitting all valves, bends etc. in original position as required.

Testing / commissioning of the pump set on NO load & full load after making of all connections.

Gupta Brothers

paramount systems

Devraj Enterprises

M G Traders and Engineers

Goodwill Enterprises

MK ENGG.CO.