REPAIR TO RAIN WATER HARVESTING SYSTEM AND DRAIN AT 7BRD, AF STN AND REPAIRS TO ROAD FURNITURE IN TECH AREA, VSB AND MES COLONY

Amount

Dismantling wrought iron or MS work of any description and in any position complete all as specified and directed by Engr-in-charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete of any description and in any position complete all as specified and directed by Engr-in-charge.

S&F framed work as in doors or gates of angles or other section with gusset plates rails brace's etc complete, drilled for fixing of steel sheeting or other covering door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings with steel sheeting or other covering, running rails and guides and hanging, also fastening and fixing complete all as specified and directed by Engr-in-charge.

S&F butt hinges medium weight, cold rolled mild steel 100mm complete all as specified and directed by Engr-in-charge.

S&F mild steel sliding door bolts, plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts nuts, four on bolt plate and two on staple plate 375mm long complete all as specified and directed by Engr-in-charge.

M&L for two coats of synthetic enamel paint to steel surfaces over one coat of red oxide primer including necessary preparation of new surfaces of any description over 10cm in width or girth complete all as specified and directed by Engr-in-charge.

S&F Welded steel wire fabric exceeding 4 Kg per Sqm welded to steel section at any position complete all as specified and directed by Engr-in-charge. Note:- Work to be carried out upto 12 to 15 mtr height

M&L for Brick work with sub class 'B' Bricks straight or curved on plan exeeeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate as in coping, bed block for holdfast etc. including necessary form work complete all as specified and directed by Engr-in-charge.

M&L for two coats of cement based paint over a coat of white wash on new surfaces of walls including preparation of surfaces complete all as specified and directed by Engr-in-charge.

M&L for three coats of white wash on newly plastered surfaces of wall duly preparation of surfaces complete all as specified and directed by Engr-in-charge.

M&L in replacement for pre cast perforated RCC drain cover with frame (rectangular or square) the area of each cover should not be more than 0.5 Sqm and thickness of 60mm each with holes manufactured with M-30 grade of concrete by Vibro Compaction process using accurately designed molds and as suitable reinforced to enable the covers to take load as specified i.e. 20 MT for Heavy duty (when tested as per IS-12592) complete all as specified and directed by Engr-in-charge.

M&L for stone Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base including use and waste of form work complete all as specified and directed by Engr-in-charge.

M&L for 150 mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in paving, road cutting and foothpath including use and waste of form work and finished surfaces of concrete even and smooth without using extra cement and spike rolling to surfaces or making impression of expanded metal whilst the concrete is in green position complete all as specified and directed by Engr-in-charge.

M&L for 450 mm bore reinforced concrete ume pipes, class NP-2, laid and jointed with collars including concrete bed to drain pipes, packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete (1:4:8) complete all as specified and directed by Engr-in-charge.

M&L for washing the bore with compressed air (Pressure not less than 250 PSI & 400 Cubic feet/min capacity) to improve porosity and taking out all the sedimentation silt, deposited at a distance exceeding 50 mtr complete all as specified and directed by Engr-in-charge.

Excavation of soil / mud from the rain water harvesting pits / drain and getting out from any depth of any type of soil and removal and spreading of excavated material from the site within the MOD land to a distance not exceeding 1000 metres complete all as specified and directed by Engr-in-charge.

Cleaning of open/covered drain and hume pipes culverts etc and the like of any type, size of any description for silt/earth accumulated due to storm water and spreading the cleaned earth where directed complete all as specified and directed by Engr-in-charge. Note: Cover slabs to be removed and refixed after cleaning with cement mortar (1:4) where covered dran exist.

M&L for fine sand (Badarpur) spreaded and leveled in layers not exceeding 15 cm in rain water harvesting pits complete all as specified and directed at site.

M&L for Loose filling with aggregates of gauge 40 to 80 mm broken stone or boulders in soakage pits, soakage wells complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in solid blocks as in road side curb stones finished even and smooth, shape and size and fixed as directed complete all as specified and directed by Engr-in-charge.

M&L for marking 2 mm thick centre line, stop line, dashes, arrows, brackets and similar work 10 cm wide and over on bituminiou/concrete road surfaces with thermoplastic paints including reflectorising glass beads @ 250 gram per Sqm laid at temperature 160 degree calcius per IRC-35 of white/yellow colour (as approved) with a special applicator machine complete all as manufacturer instructions and traffic diversion arrangment complete all as specified and directed by Engr-in-charge.

S&F in repairs solar delineator having automatic on off system under dark & bright condition fixed on 48 mm ODMS pipe in duly painted having a jali for the protection of delineator complete all as specified and directed by Engr-in-charge.

S&F in repairs reflective road stud (marker) size 100x90 mm made of ABS plastic white/yellow colour with retro reflective microprismetic panel on both side complete all as specified and directed by Engr-in-charge.

S&F in repairs of solar stud made out of aluminium housing and precast construction solar powered by SIEMENS monocrystal solar panel 2W 120 mA type of battery NI-CD 1.2 V, 2500 mAH & flash rate 2 Hz or 70 Hz view distance over 300 mtr, fitted with 2 Hz EL-805-3 pieces each side on solar battery automatically charge in day/sun light duly fixed with cement and hardner 125x125x85mm in red/yellow colours complete all as specified and directed by Engr-in-charge.

AMIR ENTERPRISES