Setting up of referral lab or honey testing in Jharkhand under NBB scheme at FSRCHPR, Ranchi

Amount

Sub Heading 1

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to theanglehangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450 mmcentre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)TOTAL AREA=32’x19’=608sft~-56 5sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand and manufacture Total Area=104.28

Providing venyl flooring sheet with fixing, placing and pasting giving smooth and evenly surface with all complete jobs. TOTAL AREA=32’x19’=608sft~-56.5sqm

Half brick masonry with commonburntclay F.P.S. (non modular) bricks of class designation7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 Total Area=8.36sqm

Three track three panel sliding window with aluminum channel, for roller track,woolpyle, nylon roller with SS304 body : uusing R4 serieswithframe(115mm and above) x (45mm and above) & sash (44mm & above) x (55mm &above)with zinc alloy zamak powder coated handle on two end panel along with mltipoint locking system. (height above 1.8mm) Total=20 x 6=120sqft>11.15sqm

Three track three panel sliidng door with alumiinnium channel, for roller track,woolpyle, nylon roller with SS304 body : using R3 series with frame (55mm & above) x(40mm & above) & sash((30mm& above)& ((74mm& above).(Height upto 2.5m)= 3.25sqm

Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, cabinet under counter etc. all complete as per direction of Engineer-in-charge sizes.20x6,9’6”x3,5x3,26x3.

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red 18.73sqm

Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings Size 600x450x200 mm Total. =2no.s

Dismantling&removing of old grill of windows 11,15sqm

Goods and Service Tax @ 18%

Jitu Kumar (BID ID -3148950)

Bharat Ratan Pandey (BID ID -3149387)