Electrification of ADM Block at District Police Line Choglamsar Leh.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

In Existing PVC Conductor recessedGI Box

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a)1 x 1.5 Sq.mm+ 1 x 2.5 Sq.mm earth wire

b)2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

2x10 Sq.mm +1x6 Sq.mm earth wire

c)4x 16 Sq.mm + 2 x 6 Sq.mm earth wire

3x 1 x 5 Sqm

3x 1 x 5 Sqm

3x 1 x 5 Sqm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. A)1x 1.5 sq. mm

b)1 x 2.5 sq.mm

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required a)5/6 A switch.

b)3 pin 5/6 A socket outlet

c)15/16 A switch

d)6 pin 15/16 A socket outlet

e)Telephone socket outlet

f))T.V antenna socket outlet

G)Bell Push

Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/ wooden block including connection etc. as required

Supplying and fixing moulder blanking plate on the existing moulder plate &switch box excluding moulder plate as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a)6way ( 4+ 18) Double Door

8 way (4+24) Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a)Single pole 6/16 amp.

Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required a). 25 mm

Supplying and fixing following size/ modules, GI box on surface in recess alongwith modular base & cover plate for modular switches in recess etc as required a)4 Module

b)6 Module

c)8 Module

d)12 Module

Supply, installation, testing & commissioning of GI Electrode Earthing with 40 mm dia and 5 meter length, with 5mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Supplying and laying 25mm x 5mm G.I strip at 0.50 metre below ground as strip earth electrode including connection/terminating with G.I nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm).

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply, installation, testing & commissioning of GI Electrode Earthing with 40 mm dia and 5 meter length, with 5mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Supplying and laying 25mm x 5mm G.I strip at 0.50 metre below ground as strip earth electrode including connection/terminating with G.I nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm).

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and fixing MCCB in cubical panel board Providing and fixing following rating and breaking capacity MCCB FP in existing cubical panel board including drilling of holes in cubical panel and making connections etc. As required (Make as per annxure enclosed) A) MCCB FP 200 Amp 36KA

B)Change over switch 100 Amp MCCB type FP

Fabrication, Supply, installation, testing & commissioning of following panel made out of 2mm thick M.S sheet, wall mounted, vermin & dust proof, outdoor type with lockable type hinged doors, duly painted with provision for fixing of 1no incomer MCCB, MCCB type change over switch 1 No. including supply and fixing 2 set of Aluminium Bus bar, and strip for housing MCB,s 12 Nos, MF Digital Meter and other allied accessories as required. (Make as per annexure)

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning (Above to 32 Amp.). a)TPN 63 Amp

b)SPN 63 Amp

Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE Power Cable of following sizes on surface/surface cable tray,0.50 mtr bleow ground level etc. as required including carriage upto site of work. (Make as per annexure enclosed) a)95 Sq.mm 3.5 Core -Armoured

Supplying and fixing of 70 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall. Wipro LR02 -501-XXX-57-G1or equivalent approved make

Supplying and fixing luminaries as required LL20-111-XXX-65NE3 10 Watt LED tube light fittting . Preffered make :-Havells Endura Linear Neo or equivalent make and model Philips/ Crompton Greaves

20 watt LED tube light fitting. Ll20-111-XXX-65NE3 wipro or equivalent make & model philips/cromption Greaves.

Supplying and fixing of Musical Bell including making complete connections etc as required (make as per annexure)

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required. a)Exhaust fan 300 mm size (Heavyduty) CG transair or equivalant approved make

Supply and drawing co-axial TV cable RG- 6 grade, 0.7mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface /recessed steel/PVC conduit as reqd.

Supplying and drawing following pair 0.5mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/recessed steel/PVC conduit as requied 2 pair.

NISSAR HUSSAIN