Special repair of existing PWD rest house at Pataudi in Gurugram District (DNIT for the work special repair to E.I. only)

Amount

COPPER WIRING IN MS CONDUIT (SURFACE/RECESS) Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick MS conduit pipe.Group C

Wiring in MS conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6Amp 3/5 pin socket and 1 no 5/6Amp switch required MS Box etc complete as required Group C

Wiring in MS conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin socket and 1 no 15/16 Amp switch required MS Box etc complete as required Group C

Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Bakelite angle/straight button holder large size.

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical type TPN DB Double Door 6 way ( 8 incoming 3phase*6 outgoing)

Supply and erection of sheet steel enclosures 1pole/2 pole/4 pole on walVon existing pedestal complete as required. SPN or DP enclosure suitable for double pole MCB

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole

6 amp. to 32 amp Double POLE

40 amp. to 63 amp MCB Four POLE

Providing and fixing Piano type accessories of approved make in existing box and Bakelite sheet including fixing and making necessary connections, complete in all respect. Socket size rotary step type Electronic regulator for A.C. ceiling fan.

Supply and Fixing Bakelite sheet on existing MS/GI/wooden/PVC box etc including fixing with brass screws and washers. 5 mm thick

Supply and erection of suitable MS/GI Box covered with 5 mm thick Bakelite sheet as below 75 mm x 75 mm x 60 mm deep M.S. box

100 mm x 100 mm x 60 mm deep M.S. box

180 mm X 100 mm X 60 mm deep M.S. Box

Erection of exhaust fan in existing opening ,complete with necessary earthling of fan including carriage from PWD store to the site of work

Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required

EARTHING AND LIGHTENING ARRESTOR Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

Extra for using salt and char coal/coke for pipe earth electrode as required

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required

Street Light Supply and erection of 32mm dai meter 1.5 m long bracket (B class) making an angle of 10 degree to 15 degree with horizontal plane for mounting street light fitting of GI bracket on wall with 2 nos 32mm x 3 mm thick MS clamp including cost of cutting welding of GI pipe complete with cement sand mixture , bolt and nuts including necessary connections.

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe complete in all respect upto the entire satisfaction of Engineer in charge of the work 1.5 sq.mm

Supply and erection of cable on surface/ cable tray complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 16 Sq. mm 4 Core armoured Cable .

Supply and erection of 70/72 watts LED flood light with lense, minimum 100 lumes per watt IP 66, HP dia cast aluminium hoising including erection of same on pole with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge.