Iyothee Thass Pandithar Habitation Development Scheme 2023 2024

Amount

Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15 cm. thick well rammed and consolidated and depositing the surplus earth in all places shown by the departmental officers with initial leads and lifts, etc., including levelling the sites complete complying with standard specifcations and as directed.

Cement concrete 1:4:8 mix using 40mm guage hard broken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15cm thick compacting etc.,complete complying with standard specifications and as directed.

Filling the basement with EXCAVATED EARTH including cost and conveyance of all materials and all labour charges etc complete.

Filling the basement with Well Gravel including cost and conveyance of all materials and all labour charges etc complete.

Brick work in cement mortar 1:5 mix using IInd class country bricks of size 23 x 11 x 7 CM including the cost and conveyance of all materials and all labour charges and including curring etc., complete complying with standard specifications. Upto basement

Ground floor ( Base + First Lift)

Supplying and fabrication of steel for RCC items including cost and conveyance of all materials and labour charges etc complete

R.C.C 1:1.5:3 Mix using 20 mm HBG Metal including cost and conveyance of all materials and all labour charges etc complete. Upto basement

Ground floor ( Base + First Lift)

Supplying and erecting for sides and soffits including supports and strutting upto 3.29M height for plane surfaces in all floor is with all cross bracings using mild steel sheets of size 90cm x 60cm and 10 gauges a stiffened welded with mixed steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cm x 60.50cm dia spaced at about 9cm center to center and supported by casuarina props of 10cm to13cm dia spaced at75cm center to center etc., complete complying with standard specification and as directed for the RCC works. For Column

Below basement

Plane Surface

Plastering with cement mortar 1:3,10mm thick and including the cost and conveyance of all materials and all labour charges etc.,complete. complying with standard specifications and as directed.

Plastering with cement mortar 1:5,12mm thick and including the cost and conveyance of all materials and all labour charges etc.,complete. complying with standard specifications and as directed.

Weathering course concrete using best quality broken brick jelly of size 20mm uniform guage in pure slaked lime (no sand to be used)over the RCC roof slab in the proportion of brick jelly to lime being 32:12:5 by volume and laid over in a single layer and consolidated to the required designed and finished thickness beating the concrete with wooden beaters of approved pattern ,keeping the surface constantly wetted by sprinkling lime jaggery water as per standard specifications etc., complete as directed by the departmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 20cm x 20cm x 20mm of approved quality laid in cement mortar 1:3,12mm thick mixed with water proofing compound confirming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar ,red oxide etc., complete complying with standard specifications.

Vertified tiles flooring laying with new Vertified tiles of size 600x600x12 mm laid in C M 1:3 inculding cost of white cement and labour charges etc

Dadoing the walls with new Glazed tiles of size 150 x150 x6 mm laid in CM 1:2 ,10 mm thick and pointig with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with ties surface

Fabricatin and supply of mild steel door of any required size with double leaves outer frame made of 35x35x5mm equal M.S.L angle and shutter frame made of 25x25x5mm equal M.S angle for horizontal and vertical members and the shutters frame including cost and conveyance of materials to site and all other labour charges etc complete.

Supplying and fixing of Indian type water closet of 50mm size including all cost of WC foot restdrop including brick jelly concrete and sand filling etc.,

Painting two coats with Plastic emulsion paint of first class quality paint and of approved colour over a priming coat ,inculding through scrapping, clean removal of dirt etc. complete and inculding necessary plasterof paris , putty whereever required .

Painting two coats new iron works such as steel doors , window,ventilators,window bars balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats etc., complete

Providing the 25mm thickness of granolithic pattern floor finish with plain cement concrete 1:2:4 using hard broken stone 10 to 12mm thick and the top rubbed smooth etc., complete complying with standard specifications

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading ,tranportation and labour charges for fixing 2000 Ltr Tank

Wiring with PVC unsheathed sc Alu cable of 650v grade in suitable PVC rigid pipes concealed in wall and ceiling with PVC accessories in fush with all 3 mm thickness nylon sheet cover for T.W. swich box with continues earth wire connection of 14 SWG TC wire and making good of the cancealed portion with suitable pation for light point SD No.21

Supplying and fixing of 5 Amps C.S Plug flush type non inter locking with pin top on suitable T.W.Board SD 133

Supplying and fixing of 15 A Ac switch of 500 with fuse & neutral of suitable TW Board with earth connection SD 141

Supplying and run off 2 of Sqm polytheen insulated PVC sheathed (heavy duty) alu cable of 1100V grade in suitable board and both ends. With necessary fitting complete angles and iron up yarn and support for mains SD no 67

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 88

Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18") SD 106

Supply and fixing of 3 Phase 32A aerial fuse unit for 3 Nos 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps SD 132

Earthing as per PWD std specification with necessary masonry works etc. complete SD 148