REPAIR MAINTENANCE TO JOINERY FLOORING PLASTERING SANITARY FITTING PLUMBING TO CGRA CGOM MES INSTALLATION AND MATIKHALO AREA AT ICGS GOPALPUR

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness, roof coverings & wall complete all as specified and directed.

S&F prepainted galvalume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified with L-type or J-type cranked hook bolts in lieu of screws in roofs, walls etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F roof trusses (framed, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed

S&F hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/rectangular), area of each tile exc 0.11sqm but n.exc 0.18 Sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:3 complete all as specified and directed

M&L double charged vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match including screed bed in CM (1:6) 10 mm thick for laying floor tiles complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in ground floors and paving n exc 15 cm thickness (below or above ground level) and removal off the rubbish as directed by AGE complete all as specified and directed.

M&L 75 mm thickness PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection and paving complete all as specified and directed.

M &L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base of floor etc complete all as specified and directed

Material and labour for minimum 60mm thick precast PCC interlocking paver blocks factory made of grade M-35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine conforming to IS-15658:2006 in equal proportion of grey and coloured tile to make a pattern, laid and jointed over and including 50 mm thick(average) cushion layer of sand complete all as specified and directed.

Taking down chowkats or frames with shutters exc 1.5 Sqm and not exc 4.00 Sqm each (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc 2 Sqm each complete all as specified and directed.

S&F anodised aluminium powder coated (minium thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, powder coating of any colour (thickness of powder coating not less than 50 micron) aluminium section weighting 0.55 Kg/m including necessaryjoining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hingles, anodised aluminium snap beading screws etc complete all as specified and directed

S&F anodised aluminium window shutters, powder coating of any colour (thickness or powder coating not less than 50 micron) sliding type without sash bars, aluminium sections weighting 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, powder coating of any colour (thickness or powder coating not less than 50 micron) aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed

Supply and fixing 35 mm thick 2nd class hardwood, (Sal/hollock ) glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) and fitted to chowkats complete all as specified and directed

M&L for 35 mm thick 2nd class hard wood (Sal/Hollock) factory made plain framed paneled shutter (any number of panels), with lock rail and panel of 12mm thick BWP veneered particle board with commercial veneering on both faces. The sizes of rails and stiles as per IS : 1003 (Part-I) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed

S&F 2nd class hard wood (sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

All as per item No 24.00 hereinbefore but fixed in repair

Supply and fixing mild steel butt hinges medium weight, cold rolled 100mm size complete all as specified and directed

S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F 300 mm long Aluminum alloy, anodised sliding door bolts, (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F in repairs mortice lock, brass 4 levers vertical type, size 100 mm complete all as specified and directed.

S&F for floor door stopper of aluminium alloy body & tongue, anodised with hard drawn steel spring, overall length of cover plate 150mm complete all as specified and directed

Supply only 5.5mm thick sheet glass, ordinary quality in square n.exc 0.5 sqm in each pane complete all as specified and directed. Note : Labour Rate for fixing shall be deemed to included in quoted rate of item for aluminium work hereinbefore.

Supply only 12 mm thick pre-laminated particle board, interior grade pre-laminated both side with decorative choice laminations and fixed with screws in aluminium frame complete all as specified and directed. Note : Labour Rate for fixing shall be deemed to included in quoted rate of item for aluminium work hereinbefore.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified and directed

S & F in repair factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed and shown on page No. 160 of SSR part-II

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement incl 2 Nos aluminium handle 150mm long and 2 Nos aluminium tower bolt 200mm long and 3 Nos aluminium hinges 100 mm long fixed to each shutter complete all as specified in drawing on sl page No 156 of SSR 2010 part -II and directed.

S&F in repairs 450 mm long, 15mm dia, PVC connection pipe, with brass unions on both ends complete all as specified and directed.

S & F in repair 15mm dia PVC float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs PVC waste pipes 32 mm in size 1.2 m long flexible for use in kitchen sink, WHB of approved make complete all as specified and directed.

S&F in repairs 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (Note : The unit rate shall include the cost of short length with all pipe fittings and fixing accessories such as pipe hooks, screw, clamps etc)

S&F in repairs 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (Note : The unit rate shall include the cost of short length with all pipe fittings and fixing accessories such as pipe hooks, screw, clamps etc)

M&L for modular brick work with fly ash bricks straight or curved on plan exc 6m mean radius in cement mortar 1:6 including demolition of old existing brick work in CM complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed

Taking down old cement plaster or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for preparing old surfaces of walls by brooming down or by steel wire brushing scraping down moulds, efflorescent salts and trading oil greassy spots and applying one coat of white wash complete all as specified and directed.

S & F in repair collapsible steel gates, top hung, cosisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc complete all as specified and directed

S&F in repair neoprene/EPDM rubber gasket for aluminium window, door, ventilator etc complete all as specified and directed

S&F 2000 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part-I incluidng S&F 20/25 mm ball valve high pressure including dismantling of old existing PVC tank of same capacity and removing from site complete all as specified and directed.

S & F in repair of health faucet with 1.2m long easy flexible 8mm dia tube in chrome finished and wall hook complete all as specified and directed

M&L for pre-cast reinforced cement concrete 1:2:4, type B­-1 (using 20 mm graded granite stone aggregate ) as in cover slabs (for manholes etc) shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form work incluidng demolition of old RCC cover and removal of rubbish complete all as specified and directed. Note : Reinforcement will be measured and paid separately.

S&F mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as specified and directed.

M&L applying two coat of syntheitic enamel painting to new surfaces wooden based over a coat of pink primer exc 10 cm width/girth including preparation of surfac es including filling with filler where required completed all as specified and directed.

S & F in repair aluminium die cast body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and weight 61 to 80 Kg complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M & L for one coat of white wash on old plastered surfaces for ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of oil bound distemper on walls complete all as specified and directed

Supply and fixing 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair chromium plated long body fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in repairs pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down, high pressure, with or without lettered “Hot” or “cold” with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia and fixed complete all as specified and directed.

S & F in repair 15mm bore stop valve, fancy type chromium plated with long shank and cup (concealed type) screwed both ends (externally threaded) for iron pipe or for union complete all as specified and directed.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc of capacity exc 250 ltr but n.exc 500 ltrs complete all as specified and directed

All as per item No 61.00 hereinbefore but capacity exc 1000 ltrs but not exc 2000 ltrs capacity.

S&F in repairs PVC valve less, syphonic action type, white low level flushing cistern of capacity 10 litre with inlet ball valve float and handle including brackets and 32 mm dia PVC flush pipe and PVC connection 15mm dia 600mm long complete all as specified and directed

S&F in repair vitreous China wash hand basin, white flat back size 550x400 mm including brackets (including Pillar tap 15mm bore chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basisn with long screwed shanks and fly nuts & PVC waste pipe complete all as specified and directed.

S & F in repair 32 mm dia waste coupling of PTMT (half or full threaded)(Minimum weight 45 gms) complete all as specified and directed

S&F in repair 20 mm ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Labour for petty repairs like refixing of certain curtain brackets, adjust builders hardware, repairs dislocked bib tap, where required complete all as specified and as directed.

Taking out carefully precast RCC cover slab of septic tank excavating and taking out sludge including foul water in a closed container by mechanical process or manual process transporting to a distance exc 250 m but not exc 500 m and depositing the same in excavated earthern pit of sufficient size and depth in any type of soil within the defence land, where directed to a distance exc 250 m and n.exc 500 m returning, filling in earth into excavated pit after every disposal of sludge cleaning inspection pit, sludge chamber inlet and outlet pipe cleaning MS rungs etc complete for septic tank capacity from 25 user to 500 users cleaning the septic tank with fresh water complete all as specified and directed

Taking out carefully the cover slab of each manhole of depth from1.0mtr to 2.00 mtr and removing the sludge by mechanical process or manual process transporting to a distance exc 250mtr but not exc 500mtr and depositing the same in excavated earthen pit of sufficient size and depth of any type of soil with in the defence land, where directed including returning, filling of earth in excavated pit after every disposal of sludge etc and cleaning with fresh water, placing the cover slab in position complete all as specified and directed

Cleaning/removal of blockage from Nahani trap, floor trap, gully trap, IWC, EWC including CI or UPVC pipe or any other type of pipe including its junction to out side of wall any floor in high rise building complete all as specified and directed

Taking out carefully the cover slab of gully traps of any size and shape, depth and clearing the blockage by removing the sludge and removing material to a distance exc 250mtr and n.exc 500mtr and cleaning with fresh water placing the cover slab/grating in position complete all as specified and directed

Cleaing of blockage sewage line manually and then with fresh water of pipe 100mm dia/150 mm dia or above in between manholes and passing rubber ball of suitable size through line to ensure all blockage perfectly clear to the entire satisfaction of Engineer-in-Charge complete all as specified and directed

M/S JAGANNATH SASMAL

M/S SIWALIK AND CO

M/s Ats Electricals

R K Traders