CERTAIN REPAIR /REPLACEMENT OF INTERNAL ELECTRIC POINT WIRINGS, SUB MAIN WIRINGs, DBs AND EARTHING IN MD ACCN OF PEERU AND BADLU SINGH ENCLAVE UNDER GE NORTH BATHINDA AT BATHINDA MIL STN

Amount

SCHEDULE 'A' E/M Works

Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes any type etc. and making good distrubed surfaces of wall and floors etc to match with the existing colour all as specified and directed by Engineer-in-charge.

Material and labour for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) in existing concealed surface conduit for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly, MS Sunken box and 3 mm thick laminated sheet ISI Marked etc complete all as specified and directed.

All as per item No 2 here in before but for one socket outlet 5 pin 5 Amp on same board complete all as specified & directed.

All as per item No 2 here in before but for one socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified & directed.

All as per item No 2 here in before but for one socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

All As per item No 2 in before but for bell/buzzer point complete all as specified and directed.

All As per item No 2 in before but for one light point controlled by Two Two way switch all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power point) complete fitting such as /hylem sheet switches, ceiling rose, pendent holder, sockets, regulators including rusted/broken concealed/surface conduit and sunken boxes any size etc. and making good disturbed surfaces of wall and floor etc to match with the existing all as specified and directed by Engineer-in-charge.

Material and labour for concealed point wiring with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow, junction box, pressed steel powder coated sunken box of suitable size (min 60mm deep, suitable lenth and 1.2mm thick), 3mm thick bakelite plastic laminated sheet for mounting switches and socket, fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc., including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge.

All as per item No 9 here in before but for one socket outlet 5 pin 5 Amp on same board complete all as specified and directed.

All as per item No 9 here in before but for one socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified and directed.

All as per item No 9 here in before but for one socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power point) complete fitting such as hylem sheet switches, ceiling rose, pendent holder, sockets, regulators including rusted/broken concealed/surface conduit and modular type sunken boxes any size etc. and making good disturbed surfaces of wall and floor etc to match with the existing all as specified and directed by Engineer-in-charge.

Material and labour for point wiring complete modular type with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC rigid conduit 20mm dia (heavy duty) with all fittings and all accessories i.e pipe bend pipe hook, elbow, junction box, pressed steel powder coated sunken box of suitable for mounting modular switches and socket, fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc., including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge.

All as per item No 14 here in before but for one socket outlet 5 pin 5 Amp on same board complete all as specified and directed.

All as per item No 14 here in before but for one socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified and directed.

All as per item No 14 here in before but for one socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

All As per item No 14 in before but for bell/buzzer point complete all as specified and directed.

All As per item No 14 in before but for one light point controlled by Two Two way switch all as specified and directed.

Supply and fixing Modular fan regulator 120 Watt 360 degree 2 module mechanism white, suitable internal modular plate, complete all as specified and directed by Engr-in- charge .

Supply and fixing switch piano flush type, single pole, one way, 5/6 Amps ISI mark, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Socket outlet multipurpose, 2 in 1, 5 pin, 5/6 Amps, flush type complete all as specified and directed by Engineer-in-charge.

Supply and fixing switch piano flush type, single pole, one way, 15/16 Amps ISI mark complete all as specified and directed by Engineer-in-charge.

Supply and fixing Socket outlet multipurpose, 2 in 1, 5 pin, 15/16 Amps, flush type complete all as specified and directed by Engineer-in-charge.

Supply and fixing switch piano flush type, single pole, two way, 5/6 Amps ISI mark, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Switch 1 way 6A ,1 module 250 volts AC one way ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Socket 6 A-2/3 pin combined 2 module shuttered 250 volts AC ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Switch 1 way 16 A,1 module 250 volts AC ISI marked , model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Socket 6A/16A-2/3 pin combined,2 module 250 volts AC shuttered ISI marked, model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Modular two way switch 6A 1 module mechanism white, suitable internal modular plate and switch cover and it connected acessories.

Supply and fixing Modular Bell push with indicator 6A 2 module mechanism white, suitable internal modular plate and switch cover and it connected acessories.

Supply and fixing stepped type electronic fan regulator flush type on the existing bakelite laminated sheet etc. as reqd, complete all as specified and directed by Engineer-in-charge.

Supply and fixing ceiling rose 3 plate flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal complete all as specified.

Supply and fixing Batten holder 2 Amp 250V AC with skrit ISI marked top line series , polycarbonate cased body of brass with back plate suitable for batten fittings including led 9 watt LED bulb complete all as specified.

Supply and fixing Electric / Bell Multi Music type 230 Volt single pole AC supply complete all as specified.

Supply and fixing wall mounted Retro LED 20 watt, Batten decorative type, appx 4 feet long, pre wired including LED tube light 20W, 6000K with inbuilt driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED Mirror light fitting of 9/10 watt, 6000 K , lineer & compact with decorative grey end caps,polycarbonate body and ribbed opal diffuser complete with lamp and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in square panel with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 18 watt,6000K incl connecting electric connection including taking down unserviceable old fitting any type, complete all as specified and directed by Engineer-in-charge.

Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in square panel with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 12 watt,6000K incl connecting electric connection including taking down unserviceable old fitting any type, complete all as specified and directed by Engineer-in-charge.

Supply and fixing recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in square panel with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver,with led 6 watt,6000K incl connecting electric connection including taking down unserviceable old fitting any type, complete all as specified and directed by Engineer-in-charge.

Supply and fixing wall mounted/surface mounted decorative wall light fixture in cylindrical/Doom profile made up of polycarbonate for and including LED 7 Watt lamp, base B22, complete fitting with LED lamp and all other fixing accessories including electric connection connecting with using flexible copper wire twin core including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing surface mounted, decorative round plastic bulk head LED luminaire comprising of high brightness LED's, IP54 protection, 10 watt , 6000K complete fitting with LED lamp, driver and all other fixing accessories including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement recessed LED ceiling light with wide light window for maximized glare free output suitable for 600x600mm and ceiling cutout 595x595mm modular grid/POP ceiling complete fitting with separate electronic driver and high brightness SMD LEDs 36 watt, 6000K and one nos extra LED driver along the fittings including connecting electric connection, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Sleek Pressure die cast aluminium housing, heat resistant glass, energy saving, IP65 protection, better optics for uniform distribution street/Roadway luminaire with high power LED 25/30 watt complete fitting with driver, LED strip and all other accessories etc, suitable for direct mounting on pipe bracket, fixing on wall with and including brackets made out of GI tubing lightwith suitable bent to shape at 120 degree angle at half metre from bottom (as per sample), fixing with MS clamp (02 Nos) and nut bolts, including before fixing applying two coats of aluminium paint on bracket and clamp over a coat of red oxide primer, including making electric connection with using twin core copper cable of suitable size including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement LED Post top lantern 20 watt, IP65, with cast aluminium spigot housing, with decorative clear opal acrylic diffuser, complete fitting with all accessories and LED lamp, fixing on existing GI pipe system including all electric connections, including taking down old unserviceable fitting any type, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of 3mm thick phenolic sheet 4 inch x 4 inch including suitable machine screws including taking down old unserviceable sheet, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of 3mm thick phenolic sheet 7 inch x 4 inch including suitable machine screws including taking down old unserviceable sheet, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of 3mm thick phenolic sheet 8 inch x 10 inch including suitable machine screws including taking down old unserviceable sheet, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of 3mm thick phenolic sheet 10 inch x 12 inch including suitable machine screws including taking down old unserviceable sheet, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of switch piano flush type, 5/6Amps, 250 volts, single pole, one way fixed on existing sheet, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of Socket outlet multipurpose. 2 in 1, 5 pin 5/6 Amp, 250 volts flush type fixed on existing sheet, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement of Socket outlet multipurpose. 2 in 1, 5 pin 15/16 Amp, 250 volts flush type fixed on existing sheet, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement Batten holder 2 Amp 250V AC with skrit ISI marked top line series, polycarbonate cased body of brass with back plate suitable for batten fittings complete including 9w LED bulb all as specified.

Supply and fixing in replacement of switch piano flush type, 15/16Amps, 250 volts, single pole, one way fixed on existing sheet, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in replacement modular Switch 1 way 6A ,1 module 250 volts AC one way ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement modular Socket 6A -2/3 pin combined 2 module shuttered 250 volts AC ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge.

Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in existing PVC concealed conduit including taking down old unserviceable submain wiring complete all as specified.

Material and labour for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi -stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 sqmm in existing PVC concealed conduit including taking down old unserviceable submain wiring complete all as specified.

Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in & including PVC conduit size 20mm including taking down old unserviceable submain wiring complete all as specified.

Material and labour for submain wiring complete with two single core 6 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 Sqmm in & including PVC conduit size 20 mm including taking down old unserviceable submain wiring complete all as specified.

Material and labour for PVC conduit 25mm dia (non metallic, heavy duty), fixing on wall surface including all fitting arrangement i.e. PVC clamp, rawl plug, pipe hook, screw, terminal box, junction box, tee, bend, PVC round plate, bell mouth tube ends, couplers etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through conduit and re-connection with existing instruments as per original complete all as specified and as directed by Engineer-in-charge.

Material and labour for casing caping of size 32mm (medium grade), fixing on wall/ceiling surface including all fitting arrangement i.e. PVC clamp, rawl plug, screw etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through casing caping and re-connection with existing instruments as per original complete all as specified and as directed by Engineer-in-charge.

Supply and fixing sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 12 way 230 V AC with 200 Amp rated bus bar, Double Door,12 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down old unserviceable MCB DB's complete all as specified.

Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) TPN, 4 Way 433 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) TPN, 8 Way 433 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge.

Supply and fixing MCB SP suitable for 230 volts AC supply 6 to 40 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module including taking down old unserviceable MCB SP complete all as specified directed.

Supply and fixing MCB SPN 40 to 63 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB SPN complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB SPN 32 to 40 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB SPN complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB TPN 63 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA including taking down old unserviceable MCB TPN complete all as specified.

Supply and fixing MCB TPN 100 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA including taking down old unserviceable MCB TPN complete all as specified.

Supply and fixing (Concealed with wall) single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC supply including taking down old unserviceable enclosure complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Retro LED 20 watt tube only appx 4 ' long warm white 6000k min 100 lumens per watt with inbuilt driver to be fixed in to existing batten in replacement of tube 34/40 watt including taking down of existing tube rod complete all as specified and as directed.

Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos- 8mm dia 25mm long hex head screw. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, CI cover 10mm thick hanged to CFI frame, PCC chamber pit made with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate), including necessary form work, excavation and earth work in any type of soil , returning filling and disposal of surplus soil to a distance not exceeding 50m, complete all as specified & shown in electrical plate No. 3 of SSR 2009 (Part-I), including dismantling of old unserviceable earthing, complete all as specified and and as directed by Engineer-in-charge.

Supply and fixing recessed mounted pressure die-cast aluminium luminaire in power coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver, with LED 15 Watt, 6000 K including connecting electric connection including taking down old unserviceable fittings any type, complete all as specified and and as directed by Engineer-in-charge.

Supply and fixing decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-lite LED pride and connecting up, complete all as specified and and as directed by Engineer-in-charge.

Supply and fixing in replacement LED bulb/lamp 9/10W (100 lumens per watt) (suitable for B22/E27 base), 6000K, complete all as specified and as directed by Engineer-in-charge.

Supply, installation, testing & commisioning of wall mounted indoor LT panel board protection class IP65, 415-433V made out of 2.0mm thick RAL 7032/7035 coated CRCA steel, dust and vermin proof, double door complete pre-wired, with locking arrangements and hanging bracket suitable for fixing on wall, including painting with powder coated paint over a coat of redoxide zinc crome primer complete including necessary internal wiring for MCBs and electric meter and suitable opening for cable entry with gland comprising and including dismantling of old unserviceable LT panel of the following accessories:- (i) Incomer 100 Amps 4 pole MCCB as per existing type (ii) R Y B phase indicating lamps -01 Set (set of three) (iii) Insulated copper busbars 200 Amps rating- 04 Nos (iv) 63 Amps DP MCBs C curve -06 Nos (for DUs Meters) (v) 10 Amps DP MCB C curve -01 No. (for staircase lighting) (vi) Provision of digital voltmeter suitable for 0-500 Volts AC (vii) Provisional arrangements for energy meters with transparent acrylic sheet with separate locking arrangements -06 Nos (viii) Refixing and connecting energy meters retrived from existing old panel board -06 Nos including necessary connection.

B D BATRA AND SONS

M/s GURFATEH BUILDERS

M/s NIRMAN BUILDERS