Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹48.6 L+₹5,710.50 (0.12%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹49.7 L+₹1.2 L (2.42%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹50.6 L+₹2.1 L (4.24%)Rejected-AOC H NO 11 1 MATHRU NILAYA 7TH MAIN 3RD CROSS NEAR GAUTHAM COLLEGE OF PHARMACY BHUVANESWARINAGAR RT NAGAR BANGALORE 560 032 | BENGALURU URBAN | KARNATAKA | 560032 | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹53.4 L+₹4.9 L (10.0%)Rejected-AOC | L5 | Rejected-AOC NOT LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
3 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri S Srinivasa Rao IDSE CWE
HQ CWE ARMY BANGALORE 101 Dickenson Road Bangalore 560042
PROVISION OF OFFICE FOR ZONAL RECRUITING OFFICER (ZRO) OF HQ RTG ZONE AND INTELLIGENCE OFFICERS OFFICE WITH ATTACHED TOILET AT NO.4 DET SCLU UNDER GE (SOUTH) BANGALORE
2022_MES_554092_2
86143/E8
Open Tender
Construction Works
Works
180 days
HQ CWE ARMY BANGALORE
AS PER TENDER
8 documents required · 8 mandatory
₹500
Yes
GE (SOUTH) BANGALORE
₹90,000
Yes
HQ CWE ARMY BANGALORE
27 Dec 2022
14 Nov 2022
5 Dec 2022
14 Nov 2022
3 Dec 2022
21 Nov 2022
14 Nov 2022 - 18 Nov 2022
19 Nov 2022
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as directed.
Excavation in hard/dense soil in trenches,n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc..or for shafts,wells,cesspits,manholes,pier holes etc n.exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as directed.
Excavation in hard/dense soil in trenches,n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc..or for shafts,wells,cesspits,manholes,pier holes etc n.exc 10 sqm on plan and exc 1.5 m and n.exc 3.0m in depth and getting out complete all as directe.
Returning filling of hard/dense soil in including spreading, levelling,watering and well ramming in layers n.exc 25 cm complete all as directed.
Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.
Removing excavated soil exc 1.5 Km and n.exc 5 Km and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.
Spreading , levelling excavated material in floors in layers n.exc 25 cm thick including watering and well ramming complete all as directed.
M&L for treating the bottom and sides of excavation at the rate of 5 liters of emulsion per square metere of surface area complete all as directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 liters of emulsion per square metere of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as directed.
M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as directed.
M&L for Treating the soil along with external perimeter of building at the rate of 2.25 Litre of emulsion per meter of the perimeter wall complete all as specified and as directed.
M&L for cement concrete type D2 1:4:8 (40 mm graded aggregate ) in foundations,filling and mass concrete complete all as directed.
M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate ) in foundations,filling and mass concrete for drain complete all as directed.
M&L for M-25 Design Mix (using 20 mm graded stone aggregate ) for foundations, including rafts, footings,foundation beams,plinth beams,bases for columns etc… basement slabs,under reamed piles and mass concrete complete all as directed.
M&L for M-25 Design Mix (using 20 mm graded stone aggregate ) for columns, pillars,piers, posts and struts complete all as directed.
M&L for M-25 Design Mix (using 20 mm graded stone aggregate ) for beams, Cantilevers, bressummers,lintels over 1.5 m span complete all as directed.
M&L for M-25 Design Mix (using 20 mm graded stone aggregate ) for chajjas complete all as directed.
M&L for M-25 Design Mix (using 20 mm graded stone aggregate ) for slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves and the like complete all as directed.
M&L for flat rough finished surfaces of concrete formwork to sides of concrete foundations,footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams,and similar work,vertical or to batter complete all as directed.
M&L for rough finished square/rectangular formwork to sides of pillars, posts, struts,piers,columns and stanchions complete all as directed.
M&L for rough finished flat formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as directed.
M&L for rough finished formwork to sides and soffits of floor or roof beams,beam haunchings, griders, bressummers, lintels, cantilevers,shelves including supports, overhanges, etc...also splays between floors and beams complete all as directed.
M&L for flat rough finished surfaces of concrete formwork to soffits of suspended slab such as roof slabs,floor slabs, landings and similar work not exceeding 200 mm thick complete all as directed.
M&L for rough finished formwork to edges of concrete flats,treads,breaks in floors,window cills , concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cm but n.exc 20cm wide complete all as directed.
TMT steel bars 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as directed.
TMT steel bars 6 to 8 mm dia cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as directed.
TMT steel bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as directed.
Rendering 15mm thick in CM 1:4 on brick or concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finishing finished even & smooth without using extra cement using WPC complete all as specified and as directed. Note: WPC shall be measured and paid seprately.
Supply only water proofing compound complete all as directed.
M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017, 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.
M&L for precast cement concrete block (Type C1, 1:3:6 20 mm graded aggregate) masonry with solid block,exc 10 cm in width and setting in cement mortar 1:6 complete all as directed.
M&L for precast cement concrete block (Type C1, 1:3:6 20 mm graded aggregate) masonry with solid block, n.exc 10 cm in width and setting in cement mortar 1:4 complete all as directed.
M&L for 40mm thick DPC to horizontal or vertical surfaces including necessary form work PCC 1:2:4 type BO (using 20 mm graded aggregate) using WPC @ 3% of cement by weight complete all as directed. Note: WPC shall be measured and paid seprately.
M&L for broken stone hardcore of gauge n exc 63 mm, deposited,spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as directed.
M&L for 100 mm thick plain cement concrete type D-2,1:4:8 (40 mm graded aggregate) is used for subase of the flooring complete all as directed.
M&L for 75 mm thick plain cement concrete type D-2,1:4:8 (40 mm graded aggregate) is used for subase of the flooring complete all as directed.
M&L for 100 mm thick plain cement concrete type C-2,1:3:6 (40 mm graded aggregate) is used for subase of the flooring complete all as directed.
M&L for 40 mm thick cement concrete type B-1,1:2:4 (20 mm graded aggregate) as in sub base floors complete all as directed.
M&L for 25 mm thick cement concrete type B-1,1:2:4 (20 mm graded aggregate) as in floors finishing complete all as directed.
Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces . finished even & smooth without using extra cement all as specified and directed.
Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces . finished even & smooth without using extra cement all as specified and directed.
Rendering 5mm thick in CM 1:3.on fair faces of brick work or concrete surfaces as in ceiling finished even & smooth without using extra cement to ceiling all as specified and directed.
M&L for light shade vitrified ceramic tiles 10 mm thick, double charged (square/rectangular) polished area of each tile not exc 0.36 Sqm,in floors etc..set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM 1:6, 15 mm thick complete all as directed.
M&L for coloured nonskid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 Sqm,in floors etc..set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM 1:6,15 mm thick complete all as directed.
M&L for Glazed Ceramic Coloured tiles 350x250x 7mm/450x350x7 mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4.Complete all as specified and directed.
Material and labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over and including 20mm thick screed bedding layer in CM 1:4, and securing properly edges of path Complete all as specified and directed.
M&L for 75 mm thick plain cement concrete type C-1,1:3:6 (20 mm graded aggregate) finished even & smooth without using extra cement in plinth protection including joints filling complete all as directed.
Preparation of newly Plastered or unplastered surfaces of walls etc and applying two coat of cement base paint over one coat of primer all as specified and directed.
Preparation of newly Plastered or unplastered surfaces of walls and applying two coat of oil emulsion distember white or tint with priming plastered and other surfaces with chalk whiting on plastered surface complete all as directed.
Preparation of newly Plastered or unplastered surfaces of ciling and applying three coat of white wash all as specified and directed.
Preparation of newly Plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion including 3mm thick wall care putty and priming plastered and other surfaces with alkali resistant priming paint on plastered surface complete all as specified.
Preparation of newly Plastered or unplastered surfaces of walls and applying two coat of cement based paint and other surfaces over one coat of primer alakali resisting priming paint complete all as specified.
Preparation of newly Plastered or unplastered surfaces of ceiling and applying 2coats of OBD over alkali resistant primer complete all as specified .
M&L Second class Hard Wood Plain, Solid, Straight chowkats and frames,wrought , framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints complete all as specified and as directed.
S&F Second class hard wood 30 mm thick flush shutter soild core construction, with block board core and plywood face panels, one face is covered with decoretive face veneer with lipping/ frame to match complete all as specified and as directed.
S&F Second class hard wood 35 mm thick rail and styled plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P ommercial ply or 12mm veneered particle board with commerecial veneering on both faces. The size of rail and stiles as per IS : 1003(Part-I) klin seasoned and chemically pressure treated complete all as specified and as directed.
S&F Second class hardwood 30 mm thick glazed and skeleton shutters divided into squares open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) complete all as specified and as directed.
S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S&F 100 mmlong Butt hinges , medium weight, cold rolled, mild steel complete all as directed.
S&F anodised 125 mm extruded aluminium alloy handles fabricated type complete all as directed.
S&F anodised 150 mm extruded aluminium alloy handles fabricated type complete all as directed.
S&F 150 mm long extruded brass handles fabricated type polished complete all as directed.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as directed.
S&F 200 mm long brass barrel tower bolts, with barrel of extrude section and rolled or cast bolt complete all as directed.
S&F 300mm long aluminium alloy,anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.
S&F 300mm long brass,sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as directed.
S&F 300 mm long ordinary MS rat tail rod pattern springs including roller and roller plates complete all as directed.
S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as directed.
S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane complete all as directed.
M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
S&F framed work such as grills,gratings,etc..with ends of bars shouldered and /or riveted,or forged into spikes,framed guard bars,barred iron doors,ladders,framed balusters,walk ways,railings,framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as directed.
M&L for preperation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applaying two coat of synthetic enamel paint over a coat of red oxide,zinc chrome all as specified and directed.
S&F in repairs aluminium anodised tubular curtain rod 20mm dia complete all as specified and directed .
S&F in repairs fancy type brass bracket with screws for wall corners 25 mm dia including wooden plugs complete all as specified and directed .
S&F for Powder coated three track aluminium window with wiremesh and 5.5 mm thick glazing of aluminium shutters (minimum thickness of powder coating 50 micron) work for windows,ventilators with extruded built up standard sections /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM complete all as specified and as directed.
S&F for Powder coated two track aluminium window with 4 mm thick figured glazing of aluminium shutters (minimum thickness of powder coating 50 micron) work for windows,ventilators including aluminium grill with extruded built up standard sections /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM complete all as specified and as directed.
S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as directed.
S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2004 Part II. complete all as directed.
S&F rotational moulded polyethylene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as directed.
S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt 210 gms) complete all as directed.
S&F 20mm bore gun-metal, globe or gate valves,with iron wheel head, screwed for iron pipe or brass ferrule and fixed complete all as directed.
Supplying and laying of 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15mm GI pipe complete all as directed.
Supplying and laying of 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20mm GI pipe complete all as directed.
S&F 20mm dia CPVC brass elbow complete all as directed.
S&F 20mm dia CPVC brass Tee complete all as directed.
S&F 20mm dia female/male brass threaded adapter complete all as directed.
S&F 20mm dia CPVC Union complete all as directed.
S&F 25mm dia CPVC brass elbow complete all as directed.
S&F 25mm dia CPVC brass Tee complete all as directed.
S&F 25mm dia female/male brass threaded adapter complete all as directed.
S&F 25mm dia CPVC Union complete all as directed.
M&L for 75 mm size PVC (SWR) floor trap,plain with grating including jointing with solvent cement complete all as directed.
S&F Vitreous China washdown water closet pan & trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hing device with flush pipe to pedestal pan including all joints and connection to drain pipe and flush pipe and making good to floor all as directed .
S&F Vitreous China Valveless, syphonic action type, flushing cistern , low level white, with inlet,ball valve float and handle including brackets complete all as spcified and as directed.
S&F in repair vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. (Make Cat part No S2040103 (Cornet series) of Cera or Equivalent in parryware/hindware)
S &F vitreous china urinal half stall type white with grating complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe down take pipe etc.complete all as specified and directed.
S&F 15 mm bore Concussive push button taps of cast copper alloy suitable for urinals for iron pipe and fixed complete all as specified and directed.
S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (min wt 60 gms) complete all as specified and directed.
S&F 20 mm bore Fancy type Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed..
S&F 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed complete all as spcified and as directed.
S&F 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as spcified and as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as spcified and as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as spcified and as directed.
S&F Grating square fittings of size 150mm made in two parts for smell and mosquito proofing with minimum 25mm water seal of PTMT . (Min wt 85 gms) complete all as spcified and as directed.
S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifiedand as directed.
S&F Sheet glass shelf assembly consisting 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.
S&F liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Min wt 105 gms) complete all as specified & directed.
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Min wt 90 gms) complete all as specified & directed.
S&F 15 mm bore Fancy type two way Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spcified and as directed. Make Jaquar Cat No. ARI-CHR-39041.
S&F 15 mm bore Fancy type hand shower (Health faucet), ABS chrome plated with 8 mm dia 1.2 meter long flexible tube and wall hook complete all as specifiedand as directed.Make Jaquar Cat No. ALD-CHR-573.
S&F Health faucet, ABS body mild steel chrome plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specifiedand as directed.
S&F 15 mm bore angle valve, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specifiedand as directed. Make: Jaquar, Cat No. OPP-CHR-15053PM
S&F 15 mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specifiedand as directed.
S & F 15 mm dia stop cock/valve cast copper alloy screwed down, high pressure with ro without crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specifiedand as directed.
S & F Stainless steel toilet paper holder with flap recessed type complete all as specifiedand as directed. Make Jaquar Cat No. AHS-CHR-1553
Supply and fix single Towel Rail 600 mm long brass chromium plated fixed with and including Chromium plated brass screws complete all as specifiedand as directed. . . Make Jaquar, Cat No. AKP-CHR-35711P
Supply and fix Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifiedand as directed. .
S&F chromium plated soap dish of fancy type fixed with rawl plug & screws to wall of approved make complete all as specified & directed .
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified & as directed .
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified & as directed .
S&F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified & as directed .
S&F 110 mm bore PVC (SWR) reducers complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) junction single (singl T) equal or unequal with access door complete all as specified and as directed.
S&F 75 mm PVC (SWR) vent cowl complete all as specified and as directed .
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.
S&F 150 mm dia SGSW drian pipes laid in trenches and jointed complete all as specified and as directed.
S&F 200 mm dia SGSW drian pipes laid in trenches and jointed complete all as specified and as directed.
M&L concrete bed to 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) complete all as specified and as directed..
M&L concrete bed to 200 mm bore drain pipes incl packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) complete all as specifiedand and as directed.
M&L providing precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc) set in 1:4 cement mortor in chullah hoods, chajjas, water troughs, complete all as specified and as directed.
Cutting into existing manholes for removing existing branch 150 mm dia drains, making good to walling and rendering, cutting out branch channel and making good benchings complete all as specified.
Cutting into existing manholes for removing existing branch 200 mm dia drains, making good to walling and rendering, cutting out branch channel and making good benchings complete all as specified.
Plain cement concrete type B-2,1:2:4 (using 12.5mm graded stone aggregate) as in coping of drain complete all as specified and as directed.
Plain Cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in surface channels complete all as specified and as directed.
Extra for forming fair finished drain or channel 40cm inner girth in cement concrete using extra cement, including forms, mould and mitred/stopped ends complete all as specified.
Rendering 15mm thick in CM 1:6 on cement concrete block masonry surfaces or other surface other than fair face of brickwork or on one side of lathing and rendering is to be finished even and smooth without using extra cement complete all as specified.
Drilling and tapping cast iron water mains (in position ) for branch connections of the internal dia 20mm complete all as specified.
Supply laying GI pipe 15 mm bore mediam grade with all fittings ISI marked complete fixed to walls/ ceiling or laid in trenches/floors including required cutting and making good of masonary wall, floor, ceiling etc. complete all as directed.
Supply laying GI pipe 20 mm bore mediam grade with all fittings ISI marked complete fixed to walls/ ceiling or laid in trenches/floors including required cutting and making good of masonary wall, floor, ceiling etc. complete all as directed.
S&F Gun metal globe valve of 20mm size ISI marked with iron wheel head , screwed both ends for iron pipe or for union & fixed as in repaires complete all as specified and as directed.
Supply and fix Ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ballof size 20mm dia screwed for iron pipe and fixed ( minimum weight 15mm-142 grms/20mm-210grms/25mm-455grms/40mm-690grms) complete all as specified and as directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel ped stay, complete with glazing bars dovetailed or welded complete all as specified and as directed.
S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheels, complete all as specified and as directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Demolition of cement concrete any description and in any position not otherwise specially provided complete all as specified and as directed.
Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, or similar pattern in roof covering complete all as specified and as directed.
Dismantling wrought iron or mild steel works of any description not otherwise provided complete all as specified and as directed.
M & L for Point wiring concealed type, with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC conduit 'medium grade' with all fittings and accessories (like Tee, bend etc.) complete in walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point and earth dolly including MS/pressed steel terminal box (wall thickness 1.2mm) suitable for modular switch, socket, fan regulators etc of suitable module including cutting chases in wall/ceiling and making good using cement mortar 1:3, finished the surfaces smooth to match with the existing for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as directed and specified for :- Note :- Cost element for modular metal flush box and white cover plate/ shall deemed to be included in quoted rate.frame and connecting to earth dolly all as specified as directed.
All as per item above here in before but for one ceiling fan/exhaust fan point controlled by one 5 Amps switch complete all as directed.
All as per item above here in before but for one 3 pin socket point 5 Amp on independent board complete all as directed.
All as per item above here in before but for one 3 pin socket point 5 Amp on same board with other switches complete all as directed.
All same as per item No 150 here-in-before but with 2.5 sqmm size single core multistranded copper conductor cable for 15/16 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly complete all as specified and as directed.
S&F modular switch one way 6A, 1 module complete all as specified and as directed .
S&F modular switch one way 16A, 1 module complete all as specified and as directed.
S&F modular socket , 6A-2/3 pin combination ,2 module complete all as specified and as directed.
S&F modular socket , 6A/16A-2/3 pin combination ,2 module complete all as specified and as directed.
S & F Ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed .
S & F Fan regulator electronic, step regulator type 120 W - 2 modules complete all as specified and as directed .
Supply and fix Modular bell push, flush type, 6 Amps 1 module complete all as specified and as directed .
Supply and fix call bell AC, 230 volts single pole complete all as specified and as directed . .
S&F amp rating, 240 volts, 10 KA 'C' curve MCB SP of 6 to 32 Amps complete with connection testing complete all as specified and as directed
S&F amp rating, 240 volts, 10 KA 'C' curve MCB SPN of 32 Amps complete with connection testing complete all as specified and as directed .
S&F amp rating, 415 volts, 10 KA 'C' curve MCB TPN of 40 to 100 Amps complete with connection testing complete all as specified and as directed.
S&F MCB, DB double door type, made out of CRCA mild steel sheet surface mounting, TPN 4 way with 200 Amps rated bus bar , 415 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.
S&F sheet metal enclosure for DB's when MCBs to be used , single pole and neutral Double door, 12 way, 240 Volts complete all as specified and as directed.
S&F LED tube light fitting of 1x 20 watts , 220 volt, with AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed Make: Shakti/Crompton Greaves/Bajaj .
S&F LED tube light fitting of 1x10 watts , 220 volt, with AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed.
Supply & fix Led Street light 25 watt with pressure die - cast housing along with prismatic poly carbonate diffuser and LEDs with secondary optics and IP 66 protection complete with all Bracket and clamps accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size 24/0.2mm complete all as specified and as directed . Make Bajaj Cat No ENXT P 30L WH CR PC SD
Supply & Fix Surface mounted 36 watt 2'X2' powder coated CRCA housing luminaire providing uniform illumination suitable for all kind of open office applications. complete with all accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size 24/0.2mm complete all as specified and as directed. Make Bajaj Cat No BZSSQL 36L LED WH GX
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and as directed.
Supply and fix exhaust fan, steel body AC single phase. 230 V of size 300 mm sweep with, blades, and frame and louvers etc. complete all as specified and as directed.
M&L sub main wiring with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor(FRLS) for earth continuity conductor drawn through and include PVC Casing caping of suitable size complete all as specified and as directed. Note :- Two runs of 6Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC Casing caping will be measured as one length.
Supply, fixing ,Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of 16 Sqmm 4 Core complete all as specified and as directed.
Supply, fixing ,Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of 50Sqmm 3.5 Core complete all as directed.
Spreading river sand to required width at bottom and top for cable cushioning (not less 18 cm thick in layer after punning) all as specified in SSR Part-I complete all as specified and as directed.
Supply and lay common burnt old size bricks of sub class B laid at right angle on the cable complete in trenches for cable protection complete all as specified and as directed.
Supply and install hi wall split AC inverter type 1.5 Ton Capacity units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating including all accessories complete all as specified and as directed. Make:- Voltas/Samsung/LG
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designated for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of +- 2.5% and capacity 4 KVA . Make :V Guard
Supply and fix sheet metal enclosure with socket plug top and MCB Single pole and neutral 20 A and earth enclosure with 3 pin earth plug complete all as specified and as directed.
OM CONSTRUCTIONS
SRUSHTI CONSTRUCTIONS
S SUDHAKAR
SAI CONSTRUCTIONS
K R Koteswara Rao
Gurudut Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .