SPECIAL REPAIR TO BLDG NO T-167 AND T-168 AND ADDITION/ALTERATION OF BLDG NO P-89 AT MADHOPUR UNDER GE BASOLI.

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed .

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each and refixing in same opening complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed

Material and labour for Rendering 10mm thick CM 1:4 on concrete surafce for fixing of skirting and tiles etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Vitrified ceramic coloured tiles 10 mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes. Complete all as specified and directed..

Material and labour for Vitrified ceramic coloured tiles 10 mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match Complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone coping complete, all as specified and directed.

Material and labour cement concrete 1:2:4 type B-0 using 12.5 mm graded stone 25 mm thick in flooring, all as specified and directed.

Supply and fix for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix for harrison rail 20mm dia of stainless steel with fixing stainless brackets, stops, rollers etc complete all as specified and directed.

dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F powder coated anodised aluminium ( minimum thickness of powder coating 50 micron) for shutter of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fitting where required including the cost of EPDM rubber/neoprene gasket required (fitting shall be paid seperately) with extruded built up standard tubular sections/appropriate Z section and other section of approved make conforming to IS:733 and IS:1285 fixing with dash fastener of required dia and size including necessary filling up the gaps at junction i.e at top,bottom and sides with required EPDM rubber/neoprene gasket etc .Aluminium section shall be smooth,rust ,free,straight,mitred and jointed mechanically where required incvuding cleat angle ,alumionium snap beading for glazing /panelling,CP brass/stainless steel crews complete, all as specified and directed.

S&F alodised alumimium grill (anodised transparent or dyed to required shade according to IS :1868 with minimum anodic coating of grade AC15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass/stainless steel screw @200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete, all as specified and directed.

S&F powder coating anodised aluminium (minimum thickness of powder coating 50 micron) frame for doors,windows,ventilators with one or more rebates including joining cleats for fixing etc complete, all as specified and directed.

upply and fix in repair Aluminium (extruded section body)Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

Supply and fix for toughed glass 10.00 mm thick partion of size 450mmx900mm fixed on wall specified and directed.

Supply and fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic seat cover,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

Supply and fixing in repair for 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle and connection to pipe complete all as specified and directed.

Supply and fix in repair Tubular towel rail, 20mm dia, D-type, 600mm long between flanges brass chromium plated fixed with rawl plug etc complete all as specified and directed.

Supply and fix in repair 15 mm dia bore Bib taps ,fancy type cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified. complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix fancy type brass chromium plated soap dish complete all as specified and directed

Supply and fix three tier glass shelf assembly with brass frame of chrome mat finish with all manufacturer accessories complete all as specified and directed

Supply and fix aluminium peg set of six hooks size 50mmx60mm complete all as specified and directed

Supply and fix PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats. complete all as specified and directed

Supply and fix in repair CP health faucet ABS body with 1.25 mtr long SS branded connection pipe complete all as specified and directed

Supply and fix Stainless steel Toilet paper holder with cover fixed on wall with CP screws and all connected accessories complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands incl 32mm waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified and directed.

Supply and fix in repairs15 mm bore dia brass mixer, chromium plated, screwed down high pressure for mixing Hot and cold water complete all as specified and directed

Supply and fix in repairs15 mm bore dia brass mixer, chromium plated, screwed down high pressure for mixing Hot and cold water complete all as specified and directed

M&L PCC 1:4:8 type D-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

Supply and fix Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including including dismantling water tank any type of capacity 250 litre but not ecxc 500 litre all as specified and directed.

Supply and fix for Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

Supply and fix aluminium mortice lock verticle type 100mm with 2 liver complete all as specified and directed.

Material and labour for Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4, including demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed.

All as per Ser Item No above here in before but except brick complete all as specified and directed .

Material and labour for Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, including demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed.

M&L PCC 1:2:4 type B-0 ( Using 12.5mm graded crushed stone aggregate ) in or chamfered on edges complete all as specified and directed.

Material and labour for cement concrete Type B1, 1:2:4 (20 mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement inc WPC and preparation of new plastered surfaces and applying two coats of wheather proof paint on walls over a coat of primer including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying one coat primer and two coats of distemper oil emulsion and 3mm thick wall putty including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75 mm thick plain cement concrete Type C-2, 1:3:6, (using 40mm graded stone agg) in plinth protection finishing the surface even and smooth with using extra cement complete all as specified and directed

Supply and fix for 1.25mm thick pressed steel frames for doors of size 105 x 60 mm, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete , including one shop coat of red oxide, zinc chrome primer complete all as specified and directed

Material and labour for providing cement concrete type C-1 1:3:6 using 20mm graded stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.

M&L Box type steel windows any ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shuttters with steel handle and steel peg stay devotailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC block etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and direct

Supply and fixing for Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Supply and fix for Sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing for 35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specd

Supply and fix for Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed

Supply and fix for Aluminium anodised barrel tower bolts of extruded section with 200mm long bolt,complete all as specified and directed.

Supply and fix for Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed,complete all as specified and directed.

Material and labour for roughening surfaces of old concrete of picking sweeping and washing down with water to remove dust etc including taking down tarfelt and brushing with neat cement slurry @ 3Kg of cement per sqm complete all as specified and directed

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ncluding 10mm thick rendering in CM 1:4 complete all as specified and directed.

Supply and fix in position suspended false ceiling system using E-grid suspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mm x24mm using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly sespended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

S&F in rolled mild steel Fe-410S (Gde E-250) quality B roof trusses(framed) trusses,purlins,crane,gantries,rails and fastening and heavy bracket framing (beam ,tee,angle,channel or flat sections) including distance pieces ,cleat etc including red oxide and two coat of synthetic enamel paint complete all as specified and directed.

Material and labour for Duastone/Endura heavy duty Vitrified ceramic coloured tiles 322mmx322mmx9.5mm thick set and jointed in neat cement slurry in floor and pointed in white or coloured cement to match over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 cement mortar finished cement concrete fair and smooth without using extra cement over 75mm thick sub base PCC 1:3:6 Complete all as specified and directed

Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 Sq cm in section in any position as in unframed work complete all as specified and directed.

Supply and fix diameter of neck exc 12mm and nexc 20mm mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 30 cm long complete all as specified and directed.

Dismantling of ceiling asbestos cement board any thickness including cover fillet complete all as specified and directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site and making good disturbed surfaces of walls, floors, etc with existing specifications,complete all as specified and direct

Material and labour for Point wiring with 1.5 Sqmm FRLS PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with sunk cast iron/pressed steel terminal boxes of adequate size with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan controlled by one way switch incl 1.5 Sqmm FRLS PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. Note: (a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors et with existing specifications (b) On RCC roof ceiling surfaces PVC conduit shall be provided on surfaces for fan etc with proper fixing clips complete all as directed

All as per srl item No 2 above but for one 3 pin 5 Amp socket outlet on independent board

All as per srl item No 2 above but for one 3 pin 5 Amp socket outlet on same board.

Material and labour for Point wiring with 2.5 sqmm FRLS PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes of adequate size with 3mm thick plastic laminated sheet cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm copper conductor cable (FRLS) (multistranded) PVC insulated and unsheathed Cable as earth wire to common earth dolly, complete all as specified.

Supply and fix for Switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed.

Supply and fix for Socket outlet 2 in 1, 5 pin, 5A complete all as specified and directed.

Supply and fix in repair for Switch socket combination 3 pin,15 Amp flush type. complete all as specified and directed.

Supply and fix in repair for ceiling rose surface bakelite 65x50mm, two to three terminal isolated body fixed on PVC round block complete all as specified and directed

Supply and fix in repair Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as specified and directed.

Supply and fix for stepped type electronic fan regulator flush type with 5 steps speed control complete all as specified and directed.

Supply and fix in replacement LED recess mounting powdercoated white CRCA full glow panel 45 watt 2x2 ft incorporated with all fixing arrangements complete with all accessories internally pre-wired and Make : Crompton cat part No: (CYGNUS-C/45W/2X2/W or equivalent in Philips/Wipro/ Bajaj incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed.

Supply and fix in replacement LED tube light fitting 1 x 20 watt, 230v including tube rod with polycarbonate diffuser , of 4 feet ,complete with all accessories and pre-wired incl all necessary electric connection with three core copper cable 23/0.0076 complete all as specified and directed.

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN 8 way distribution board for MCB provisions fitted with copper bus bar 200amp rated, neutral link , earth bar complete all as specified and directed.

Supply and fix for sheet metal powder enclosure powder coated versatile double door SPN 2 way distribution board for MCB provisions fitted with copper bus bar 200amp rated, neutral link , earth bar complete all as specified and directed.

Supply and fix in repair for MCB SPN 40 Amps with 10 KA breaking capacity of 'C' series in distribution board complete all as specified and directed.

Supply and fix in repair for MCB SP 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution board complete all as specified and directed.

Material and labour for service wire10 sqmm 2core PVC insulated and PVC sheathed 1100 volts grade complete all as specified and directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth iron earth 25mmx4mm(GI Strip) size by means of bolts,nuts,check buts and washers of galvanised iron and 25mmx4mm earth lead protected by provision of GI medium grade pipe 40 mm thick cover of RCC 1:2:4 reinforced with XPM(weight not less than 4kg per sqmm) and frame of angle iron 40mmx40mmx3mm with 6mm dia MS bar handle made to shape GI light grade 20mm bore pipe of suitable length for watering perforated at bottom placed on top edged of earth plate common salt, and charcol filling,funnel,wire mesh and earth work in hard/dense soil,returning filling not exceeding 50 mtr and removal of surplus soil to plate No 3 of SSR 2009 Part-I and connecting to feeder pillars and transformer all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh pit in PCC 1:3:6 type C1 (using 20mm graded stone aggregate) 40 mm thick RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate reinforced with 8mm dia TMT steel bars @100mm c/c both way with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 35 sq mm 3.5 core complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 16 sq mm 2.0 core complete all as specified and directed.

Excavation in trenches not .exceeding 1.5m wide and not exceeding1.5m depth for foundation of pole and laying of UG cable and getting out in any type of soil , complete all as specified and directed .

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc.25 cm complete all as specified and directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified .

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof and including all fittings as required at site including taking down the old unserviceable pipe complete all as specified and directed.

Supply and fix in repair for exhuast fan steel body AC single phase 230V of size 300 mm sweep of louvers shutter complete all as specified and directed.ly.)

M&L for making holes in bathroom for fixing exhaust fan complete complete all as specified and directed. .

Taking down ceiling fan of any make &sweep from existing position of any heighto complete all as specified and directed.

Hanging only ceiling fan 1200mm/1400mm sweep complete all as specified and as directed .

S&F Fabrication of Feeder pillar box double and outdoor type incorporated with busbar chamber having with aluminium busbar capacity 125 amps insulated with RYB & black PVC insulation tape suitable for 415 Volts 3 Phase 4 wire system 50 C/s fixed on SMC/DMC in step way complete with dust and vermin proof provision made of CRCA MS sheet not less than 3.15 mm thick also having provision for incoming/outgoing COS/cable, 02 Nos earth terminal point complete with 10mm bolt 02 Nos nuts and 02 Nos washers 3 mm thick complete earth. The panel body must be painted with powder coated paint after the complete 7 tanks dip process to remove all impurities from the panel sheet, all the door must be fixed with detachable pin type hinges, steel door locking system, bus bar shall be through aluminium strip properly insulated fixed on SMC/DMC insulators. Panel body shall be fixed on iron angle frame of size 40x40x5mm and 40 cm grouted in PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate and 40 cm above the ground level duly painted with two coat of synthetic enamel black paint over a coat of red oxide primer complete all as specified and directed. including followinf accessories:-. (i) MCCB 63 Amps 25 KA rating FP 415 volts-01 No (Incoming). (ii) MCCB TPN 40 amps 25 KA 415 Volts -03 Nos (outgoing) (iii) MCB SPN 32 Amp, 10KA -02Nos ( outgoing) (iv) Voltmeter 0-500V(Digital Display) (iv) On load change over of capacity 63 amp -01 No (v) Eelectric meter single phase suitable for 230 V,10-60 Amp accuracy class 50 Hz-01 No (vi) RYB LED indicator lamp-03 Nos.

Om Sai Ram Builders

BALKRISHAN GUPTA AND SONS

R K Builders

Ms Narinder Kumar Sehgal

M/S Raghuvanshi Builders

M/S RUDHRAKSH TRADING CO

M/S Ajay Saini