PROVISION FOR MURALS, SIGNAGE BOARDS, CLOAK ROOM ALUMINIUM PARTITION, TRAP DOOR ARRANGEMENTS AND OTHER INTERIOR WORKS FOR GRAND LIBRARY IN COIMBATORE DISTRICT

Providing and making E.V. Ramasamy portrait multi layered wall relief mural on reception backdrop wall. Mural projection from the ranging from 2'' - 3'' as per the anatomy of design. I.Mural made of reinforced hardended fiber glass material with auto coat process colouring method as per client request. Priming of 01 coats, base coloring of 2 coats and final coloring of 2 coats with exclusive approved auto coat colors etc., complete complying with standard specification. FRP Wall relief mural

Providing and making E.V. Ramasamy portrait multi layered wall relief mural on reception backdrop wall. Mural projection from the ranging from 2'' - 3'' as per the anatomy of design. I.Mural made of reinforced hardended fiber glass material with auto coat process colouring method as per client request. Priming of 01 coats, base coloring of 2 coats and final coloring of 2 coats with exclusive approved auto coat colors ( 1. Self respect 2.Women's rights 3. caste eradication 4.Language & Cultural identity 5. Political evolution 6. Social justice ) etc., complete complying with standard specification. with social activity element FRP wall relief mural

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading balance 2/3rd portion shall be provided with 12mm thick MDF board both side prelaminated etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be got approved by Executive Engineer before use.

Fabricating Supplying and fixing in position of aluminium anodised natural colour matt finish Double leaf shutter with half panelled, 12mm thick bothside prelaminated partile board at bottom and half glazed using 5.50mm thick Plain glass at top. The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319 kg/m and Shutter frame made of section bottom rail 100x44.45x2.50mm @ 1.974 kg/m,Top&Vertical rail : 50x44.45x2.50mm @ 1.292kg/m,Lock rail: 50x44.45x2.50mm @ 1.292kg/m, Alu.clips:17.15x17.27x1.50mm @ 0.176kg/m,Aluminium Handle : 100x30mm @ 0.988kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 2 Nos., aluminium tower bolt 200x12mm - 1No., Hydraulic Floor Springs of various sizes, Double Acton Hydraulic Floor Spring of approved quality, brand, manufacture asper BIS Standards for doors including cost of cutting floors as required, embedding in to floors and stainless steel cover plates with aluminium pivot and single piece MS sheet outer box with side plate etc., capable of taking upto 130 kg. weight from door shutter with ISI monogram - 2Nos ., lock-1No.,

Door stopper with rubber bush as per BIS standards including cost of all materials, labour charges and power consumption charges required for fabrication including chipping dismantling and making holes to the required extent in RCC in column/beam/masonry with power drill wherever neccessary and redoing the damaged portion to the original condition after fixing etc. complete complying with standard specification and as directed by the deparmental officers...Alu. Section are to be anodised with matt finish under electrically controlled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer in charge. with floor spring and hinges

Fabricating, supplying and erection of Trap Door/ Inspection Door for Ceiling Suspended AHU with 19mm thick water proof marine grade BWR plywood, termite proof and MS Grills with tubular sections of required sizes of all trusses including anchor bolt fittings at suitable places should be done as per approved drawings. All cutting, drilling holes, welding and fixing of members with necessary bolt and nuts of approved quality hoisting, aligning and glazing the frames in position should excute as per approved drawings. The Trap door is externally finished with approved lamination & internal surfaces lined with acoustic insulation with necessary approved hardware/accessories and fixed as per site condition. The Trap Door/ Inspection Door should be fixed such a way that the AHU can be accessed and serviced periodically. The rate should included the cost of painting the members with one coat of red oxide primer and zinc chromate etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and placement of movable planters made from fibre reinforced polymer (FRP) as per design or as directed by the engineer at various locations in site and heights within the building.Work includes supply of planter, filling with planter earth ( upto 50mm from rim) and planting the shrub, all complete.The filling earth shall be in the following proportion : local site soil mixed with imported top soil and organic compost in the ratio 3:1:1 by volume ( 4 part of stacked volume of earth after reduction by 20% : 1 part of stacked volume of organic compost after reduction by 8%) flooding with water dressing including removal of rubbish and surplus earth.

Cream white box tray 36 inches rectangular planters box

Supplying and planting of healthy well grown shrubs in 6'' bag size, minimum 0.45mt in height, without damage of shoots and roots, excavation of pit size 450mm x 450mm x 450mm and backing filling of topsoil, red earth or equivalent fertile soil, compost,bio-pesticides with proper stacking. Rate includes plant cost, soil mixtures ,transport,supervision,maintenance of 12 months...all complete.

Ceasalpinia pulcherrima-600mm

Supplying and planting of healthy well grown groundcovers in 6'' bag size, minimum 0.3 mt in height, without damage of shoots and roots, excavation of pit size 300mm x 300mm x 300mm and backing filling of topsoil, red earth or equivalent fertile soil, compost,bio-pesticides with proper stacking. Rate includes plant cost, soil mixtures , transport, supervision, maintenance of 12 months all complete.

Lantana swellonia 'purple', 'white'

Allamanda cathartica 'dwarf yellow'

Rhoe discolor

Ixora sunkirt 'pink'

Providing and fixing of 3mm thick ACP with lamination Size: 12''x16'' etc., complete complying with standard specification.

Providing and fixing 3mm Aluminium Sheet with XI diamond grade retro reflective film screen printing & MS back supporting frame of 75mmx75mmx6 thickness with a clear height of not less than 1.2m from the ground level to the bottom of the sign board and 0.6m below ground level. the sign should be painted as per IRC 67-2012 and firmly fixed to the ground by means of a properly designed foundation with M20 grade cement concrete 30cmx30cmx30cm size, including cost and conveyance of all materials, equipment, machinery, and labour with all leads and lifts. Reflective sheet shall consist of a minimum coefficient of retro-reflection as per Table 6.6of IRC 67-2010. The retroreflective sheeting shall be covered under 7 years of durability for outdoor exposure. The entire sign system shall be obtained as per IRC 67:2010 as per MORTH etc., complete complying with standard specification.

Supply & Installation of 3mm thick Cast Coloured Acrylic and vinyl with HP Latex Print & fixed with double side tape 12mm Width tape to be used for better bonding Sign Size : Durability not less than 8 to 10 Years Size: 24"x48" etc., complete complying with standard specification.

Supply & Installation of 3mm thick Cast Coloured Acrylic with vinyl with HP Latex Print & fixed with double side tape 12mm Width tape to be used for better bonding Sign Size : Durability not less than 8 to 10 Years Size: 350mmx150mm etc., complete complying with standard specification.

Dadooing walls with following best approved quality, granite tile of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand), with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing with granite slab of Jet Black and similar/ other varities with a size of 1200mmx600mmx18-20mm

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC soil pipes (including the cost of 100mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Manufacturing supplying and fixing in Position of the Tamil Nadu Government Emblem of dia 15" made stainless steel including, Computer designing, drawing, pattern making, moulding, grinding, painting, the emblem etc., complete as directed by the department officers.

Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply above ground level.

32mm dia

40mm dia

50mm dia

Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements Since the labour for cutting, pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed).

32mm dia Elbow

32mm dia TEE

32mm dia BEND

40x32mm dia Reducer

40mm dia ELBOW

40mm dia TEE

40mm dia BEND

50x40mm dia REDUCER

50mm dia ELBOW

50mm dia TEE

50mm dia BEND

Supplying of marble stone slab of size 3'0''x4'0'' ( galaxy green in colour) with golden border alround and carving the letters with the golden background as the format given by the occupying department etc., complete the rate inclusive of cost of materials, carving the letters,conveyance charges,loading and unloading etc.,complete.

Supplying and Fixing of Emblem 30'' made of Titanium Gold size to suit the Architectural elevation drawings given for the including Cost, conveyance and all other materials and Labours involved etc., complete and as directed by the Department Officers.

Supply and installation of Anutone Stretch Dekor Grafix system consisting of Dekor Grafix fabric with polyester core, digitally printed acoustically-transparent face covering of choice colour, size 1.4m, stretched by using combination of Anutone Strand2 primer,Anutone Strut FS15 Tracks, Anutone SynthPF 05x25 infill with Anutone strut framework. Anutone Strut framework system shall include Anutone Strut CC25, fully knurled, sectional thickness 0.55mm, length 3600mm, knurled web 50mm, depth 25mm and equal flanges 15mm is fastened to wall horizontally at 600mm centers. Anutone Strand2 primer panels of size 600x1200x20mm, density 400kg/m3, weight 8kg/m2 are then fastened perpendicular to strut CC25 behind using suitable fasteners. Wooden/ply base 12mm are then installed on Strand2 primer on marked lines with metal fasteners at 300mm centers embedded in plastic sleeves. Fix Anutone Strut FS15 half wrap , Midseam and Outer corner, rigid FR-PVC high strength tracks square / bevel edge on the wooden surface by using heavy-duty fasteners at 150mm centers on one/both sides of Anutone Strut Tracks. Anutone SynthPF 05x25mm is then adhered on Strand2 primer,inbetween tracks, using Stick 7 adhesive. This completes the substrate to receive the Stretch Dekor Grafix acoustical membrane.

Anutone Stretch Dekor grafix acoustical fabric of width 1.4m is stretched and tucked into the Anutone Strut Tracks and secured to the locking jaws with purpose-specific tucking tools to obtain smooth, taut, wrinkle-free finish. Ensure the weft and weave of the fabric along with the surface all oriented in one direction to achieve uniform shade. Note: Minimum 100mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300mm. Technical Parameters of finish product * Fire (Class) – 1 * Acoustics – NRC upto 0.8 (for system) * Climate (°C, RH) – 50, 90 * Light (%) – print dependent * Green (VoC, RC %) – Low, 25 etc., complete the rate inclusive of cost of material, carving the letter, conveyance, loading and unloading etc., complete.

Please Enable Macros to View BoQ information