REPAIR REPLACEMENT OF INTERNAL ELECTRIC WIRING, CEILING FANS, EXHAUST FANS, PERIMETER LIGHTS AND STREET LIGHTS WITH OTHER CONNECTED WORKS AT HQ 10 SECT RR AND 29 RR BN UNDER AGE (I) CIF (K)

Amount

Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches , ceilling roses , holder , tube light , bulk head , pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces, wall, floors etc.)

M& L in replacement of Point wiring for one light point / fan point or bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLS , Multistranded copper conductor cable as in and including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, mediun duty for one light, fan, bell pioint controlled by one switch including sunken steel boxes of suitable size with 3mm thick plastic laminated bakelite sheet including FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour ) as continious earth wire and connecting to earth dolly, and making good to distrub surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces.

All as per Sl item No 2 here in before but wiring with FRLS , Multistranded copper conductor cables in PVC Casing and capping Note : Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

M& L in replacement of Point wiring for one socket outlet 5 Amp 3/5 pin for independent board etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate size not less than 20mm dia,and with sunk cast iron for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified.

All as per Sl item No 4 here in before but for one 3 pin 5 amps socket outlet independent board in PVC casing & caping all as specified and directed. Note: Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

All as per Sl item No 4 here in before but for one 3 pin 5 amps socket outlet on the same board with other switch.

All as per Sl item No 4 here in before but for one 3 pin 5 amps socket outlet on the same board in PVC casing & caping all as specified and directed. Note: Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.

M&L in Replacement of Point wiring for one 15 Amp independant socket outlet point using 4.0 Sqmm FRLS PVC insulated unsheathed multi-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly .

All as per Sl item No 8 here in before but for 15 Amp socket outlet in in PVC casing & caping all as specified and directed. Note: Rates are deemed to be including providing PVC accessories i.e Tee,elbow,socket etc.casing/caping

M & L for Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed.

M & L in replacement for Switch piano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed.

M&L for Bell push switch piano flush button single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and directed.

M&L in replacement for Bell push switch piano flush button single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and directed.

S&F for multi socket outlet for 2 &3 pin, 6A, flush type complete all as specified and directed.

S&F in replacement for multi socket outlet for 2 &3 pin, 6A, flush type complete all as specified and directed.

S&F for socket outlet 2 in 1, 3 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.

S&F in replacement of socket outlet 2 in 1, 3 pin, 6 and 16 Amps , flush type, single pole, one way, 230Volts complete all as specified and directed.

S&F for switch piano, flush type, single pole, one way, 16 Amps 230Volts complete all as specified and directed.

S&F in replacement of switch piano, flush type, single pole, one way, 16 Amps 230Volts complete all as specified and directed.

S&F for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. all as specified and directed.

S&F in replacement for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. all as specified and directed.

M&L in replacement for ceiling rose surface bakelite 2 to 3 terminals with polycarbonate body.

M&L for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

M&Lin replacement for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

M&L in replacement of LED bulb 9 watt 230 Volt all as specified and directed.

Supply & fix for wall mounted 1x20 watt LED 6500K tube light fittings (4 feet long), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

Supply & fix in replacement of wall mounted 1x20 watt LED 6500K tube light fittings (4 feet long), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

Supply and fixing for LED light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement of LED light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 volt AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ.

S&F in replacement of LED Bulk Head luminaries 10W complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ.

M&L for Bell, Ding Dong AC 230 volts, single pole complete all as specified.

M&L for in replacement of Bell, Ding Dong AC, 230 volts, single pole complete all as specified.

Supply and fix in replacement of old unserviceable Sheet metal enclousre for DBs single door single pole and neutral with 200 amps rated bus bar of 2-way, 240 volts complete all as specified and directed.

Supply and fix in replacement of old unserviceable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 4-way, 240 volts complete all as spd and directed.

Supply and fix in replacement of old unserviceable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8- way, 240 volts complete all as spd and directed.

Supply and fixing in repair MCB single pole and nuetral 40 Amps, 240 volts , B-series complete all as specified and directed.

Supply and fixing in repair MCB single pole 6 to 32 Amps, 240 volts , B-series all as specified and directed.

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and one run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in existing surface /recessed steel/ PVC conduit complete all as specified and directed by Engr-in-charge.,

S & F in replacement (including taking down old fitting) LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in Repair octane LED panel of 12 W 6500K round slim,compact,auminum die cast edge lit panel, Recessed mounted round fixture with opal diffuser and separate electronic driver and low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology.An ideal solution where ceiling voids are limited but high lumen output Cat No- LHEBADP7IZ1W015 of Havells or equivalent in Bajaj/Crompton Greaves/Phillips

S&F in Repair octane LED panel of 12 W 6500K square slim,compact,auminum die cast edge lit panel, Recessed mounted square fixture with opal diffuser and separate electronic driver and low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology.An ideal solution where ceiling voids are limited but high lumen output Cat No- LHEBAEP7IZ1W015 of Havells or equivalent in Bajaj/Crompton Greaves/Phillips

S&F in replacement of old u/s service cable size 10 sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed.

S&F in replacement of old u/s service cable size 16 sqmm twin core multistranded fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire of 4mm dia or tape and overall PVC sheathed complete all as specified and directed.

S&F "as in repair prewired" VTPN Distribution board with provision for MCCB as incommer 100 A 04 pole IP 54 ,04way(for incomming MCCB & outgoing MCBs), with copper busbar for each phase, with Neutral bar, Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 100 Amps MCCB, 25 KA, 4 pole, as incomer and SP MCB's of cap 6-32amps as outgoing complete all as specified and as directed. Note: Rate of MCCBs and MCB,cutting,chasing,grouting in wall are included in above rate.

Servicing of ceiling fans of capacity 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws, canopy screws of suitable size and ensuring all blades screwed properly before refixing incl replacement of PVC fan box round sheet as required on site and making electric connection with flexible copper conductor of size 3 core 0.50 Sqmm complete all as specified and directed. (Note:- Rewinding and unserviceable parts other than specified in this item if any will be measured seperately).

M & L for taking down, opening, dismantling and taking out burnt winding wire by cutting, cleaning slots and re-winding of AC ceiling fan motor 1400/1200mm sweep any make with super enameled colour copper winding wire of gauge 35/36 SWG including, sleeve work, varnishing with 1st class insulation paper with threading complete all as specified and directed. Note:- Total weight of winding wire should not be less than 200gm Per fan. Make of winding wire: RR/ BIC/ Devidyal/ Swastik or equivalent make as per command approved list.

Servicing of Exhaust fans of size upto 750 mm sweep including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws of suitable size and ensuring fan blades screwed properly before refixing and making electric connection with flexible copper conductor of size 3 core 0.50 Sqmm complete all as specified and directed. (Note:- Rewinding and unserviceable parts other than specified in this item if any will be measured seperately).

M & L for taking down, opening, dismantling and taking out burnt winding wire by cutting, cleaning slots and re-winding of exhaust fan/wall mounted fan motor upto 450mm sweep with super enameled copper winding wire of gauge as per existing and approved from engr-in-charge before fitted including cutting and getting out old brunt winding, sleeve work, varnishing with E class insulation varnish, threading complete all as specified and directed.

Supply & fixing only for replacement of old unserviceable gun metal bush of ceiling fan of size 1200/1400mm sweep as per existing size complete all as specified and directed.

Supply & fixing only for replacement of old unserviceable capacitor AC 440 volts 2.5 mfd with copper wire terminal incl PVC clamp complete all as specified and directed.

All as per Srl item No 51 Above but of rating 3.15mfd.

Supply & fixing only ball bearing suitable for ceiling fan/exhaust fan/wall/pedestal fan any type complete all as specified and directed.

Supply & fixing only for replacement of old unserviceable shackle assy kit (rubber real -01, MS split clamp -02 Nos, nut ,check nut,spring washer, bolt not less tha 6.0mm dia & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed.

Supply & fixing only in replacement of old unserviceable ceiling fan blades made of MS sheet duly powder coated of thickness not less than 1.0mm suitable for 1400/1200mm sweep ceiling fan complete all as specified & directed.

Supply and fixing down rod made of MS pipe medium grade 15mm dia of 300/600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to down rod with spray painted two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fixing in replacement PVC canopy for ceiling fan of suitable size complete all as specified and directed.

S&F in replacement of Matallic casing (upper and lower) for housing ceiling fan motor of size required at site for ceiling fan 1200mm/1400mm sweep made out of powder coated CRCA sheet complete all as specified and directed.

Supply and Fixing in replacement cable PVC insulated and overall sheathed with flexible copper conductor 3 core of size 0.5 sqmm

M & L for Removing old paint by scraping with sand paper including washing and filling cavaties with filler and applying two coats of painting with existing colour to ceiling fan 1200-1400mm sweep at site with heat resistant synthetic enamel paint by spray painting on the ceiling fans complete all as specified and directed by Engr-in-Charge.

M & L for Removing old paint by scraping with sand paper including washing and filling cavaties with filler and applying two coats of painting with existing colour to Exhuast fan upto 750mm sweep alongwith connected part at site with heat resistant synthetic enamel paint by spray painting incl on the Exhuast fan complete all as specified and directed by Engr-in-Charge.

Supply and replace existing unserviceable Matallic shutter of exhaust fan as per existing size & shape complete all as specified and directed.

Supply and replace existing unserviceable PVC fan blade of exhaust fan as per existing size & shape complete all as specified and directed.

M & L for lathe work of Ceiling Fan/ Exhaust fan of any capacity and make incl re-alignment to rotor, stater sloter, cleaning welding , bracing and polishing etc and refixing after repair and testing complete all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable outer PVC body of exhuast fan alongwith shutter cover plate of size upto 300mm incl all fitments such screws, gasket cover canopy of both side etc complete

S & F as in replacement of motor of Exhuast fan upto 450mm sweep Matallic body 230 volts 50Hz 900 RPM (ISI Marked) with copper winding complete all specified and directed.

M&L for replacement of old unserviceable outer Matallic body of exhuast fan alongwith connected support arm and body frame of size upto 450 mm incl all fitments such screws, gasket cover canopy of both side etc complete

S & F LED street light fitting of 35 watts, 5700k, IP 66 IK-07 rating power factor >0.95, IK-08 having 120 lm/watt efficacy with invidual lens cover on each LED, rendering index > 70, 4 KV integrated surge protection, external 10 KV surge protection potted driver, tougned glass cover in high pressure die-cast powder coated aluminium housing and making connection using 3 core fleaxible copper cable complete all as specified and directed by Engineer -in-charge.

All as per srl item No.68 above but 60 watt

All as per srl item No.68 above but 70 watt

All as per srl item No.68 above but LED flood light 120 watt, 6000K

Note :- An amount of Rs 31,430.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S Manzoor and Co (BID ID -3248119)

M/S BHAT TRADERS (BID ID -3249254)

M/S JIWANRISAM SERVICES PRIVATE LIMITED (BID ID -3249436)

M/s Nasir Rasool Dar (BID ID -3254629)

M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR (BID ID -3254483)

M/S S. D. BUILDERS (BID ID -3249035)

M/S B A Traders (BID ID -3249198)