Aadhaar service centre at ELCOT

Annexure

Dismantling - Doors and Windows including removal of frames, hinges and fastenings, Aluminium/ Calcium silicate Partition walls, including the removal of frames, hinges and fastening. The rate is inclusive of clearing away of old debris from site etc., complete complying with standard specification and as directed by ELCOT Officials

Dismantling - False ceiling, including the removal of frames, hinges and fastening etc., complete complying with standard specification and as directed by ELCOT Officials

Dismantling - Wall racks, including the removal of frames, hinges and fastening Shifting of existing Office Godrej Racks away from office. The Rate is inclusive of Loading & unloading and Transporation Charges etc., complete complying with standard specification and as directed by ELCOT Officials

Providing and laying of Vinyl Flooring of approved make and shade in approved pattern/design, conforming to relevant IS standards, of thickness 3.0 mm (as specified), laid over a smooth and level base. The work shall include: Surface preparation of subfloor (cleaning, leveling, removal of dust, undulations, etc.) Application of approved adhesive as per manufacturer specifications Laying of vinyl sheets/tiles with proper alignment and matching of patterns Rolling with suitable roller to ensure proper bonding Cutting to required sizes and finishing edges neatly Skirting (if required) up to specified height using matching vinyl Cleaning the finished surface The rate is inclusive of Cost of all materials, labour, tools & tackles Adhesives, jointing, finishing, and wastageTransportation, loading/unloading etc., complete complying with standard specification and as directed by ELCOT Officials

Providing and fixing yellow colour tactile paving tiles of size 305 mm x 305 mm x 15 mm thick, made of high-strength ceramic material, designed specifically for visually impaired persons, conforming to relevant standards and approved specifications. The tactile tiles shall be of warning (dot type) and directional (line type) patterns, with anti-skid surface, high wear resistance, and weather durability. The tiles shall be laid over a prepared base in cement mortar 1:3 (1 cement : 3 coarse sand), including proper alignment, spacing, and jointing with suitable grout matching the tile colour. The rate shall include: Surface preparation and cleaning Laying in required line/levels/slope Cutting, edge finishing, and fitting around obstaclesJoint filling with cement slurry / grout Curing, cleaning and finishing Complete in all respects as per drawings etc., complete complying with standard specification and as directed by ELCOT Officials

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement etc., complete complying with standard specification and as directed by ELCOT Officials

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over etc., complete complying with standard specification and as directed by ELCOT Officials

Supplying and fixing the Wall Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and adhesives giving neat finish. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification and as directed by ELCOT Officials

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work etc., complete complying with standard specification and as directed by ELCOT Officials