Construction Of Bus Washing Machine Concrete Platform In Palani -2 Branch

Dismantling clearing away and carefully stacking materials useful for re-use for any thickness of walls Chipping and Chiseling

Dismantling clearing away and carefully stacking materials useful for re-use for any thickness of walls Dismantling PCC concrete

Towards the Tempo hire charges and labour charges for removing, loading and unloading the waste earth obtained from flooring inside the grease pit in Tiruppur 1 branch and cleaning outside the campus complete as directed by the corporation officers.

Earthwork for depositing the work, leveling branch bus washing platform portion clearing using JCB as directed by the departmental officers including hire and fuel charges and driver batta Etc complete

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS,BED BLOSKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm*60*cm and BG 10 stiffened with welded mild steel angles of size 25mm *25*mm*3mm for boarding laid over country wood joists of 10cm *6.50cm spaced at above 90cm center to center and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed.

RELAYING PLAIN CEMENT CONCRETE 1:5:10(one cement five sand and ten aggregate) using 40MM gauge hand broken hand granite stone jelly for FLOORING including dewatering if found necessary and laid in layers of not more than 15 CM thick, well rammed etc, complete complying with standard specification.

RELAYING PLAIN CEMENT CONCRETE 1:2:4(one cement, two sand and four aggregate) using 20MM gauge hand broken hand granite stone jelly including dewatering if found necessary and laid in layers of not more than 15 CM thick, well rammed etc, complete complying with standard specification.

RELAYING CEMENT CONCRETE 1:2:4(one cement, two sand and four aggregate) using machine crushed 20MM gauge hand broken jelli for all reinforced cement concrete works. Connected to this work excluding centering, shuttering and cost of reinforcement grills placed in position, but including laying curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement motar 1:3(one cement and three sand)and kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and placing and in position mild steel /ribbed tor steel rods of all size for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specification

PLASTERING with cement mortar 1:3(one cement and three sand) 12MM thick in all floors complying with standard specifications.