REPAIR REPLACEMENT OF UNSV OLD WIRING FITTINGS FIXTURES AND UNSERVICEABLE CEILING FAN EXHAUST FAN GEYSER AND OTHER CONNECTED WORK AT RAKSHANAGAR AND REPAIR REPLACEMENT OF UNSV OLD WIRING FITTINGS FIXTURES AND DAY TO DAY MAINTENANCE OF ELECTRICAL FITT

Amount

Taking down existing copper/aluminum existing point wiring (light/fan/socket or power points) complete (fittings such as switches,ceiling roses,pendents, regulators, sockets etc to be measured saperatly) incl wooden battens and conduct etc & removing material as directed complete all as specified and as directed by Engr-in-Charge.

M&L for Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in and including surface in wall/celling/floor in PVC casing caping as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including PVC boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr-in-Charge.

All as per item no 2 but for One 5 Amps socket point on same/below board with other switches.

All as per item no 2 but for One 5amps switch socket point independent.

Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge.

All as per item no 5 but for One 5 Amps socket point on same/below board with other switches.

All as per item no 5 but for One 5amps switch socket point independent.

M&L for Point wiring with 2.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run including surface in wall/celling/floor in PVC casing caping as per IS with all fittings such as bends, tee, junction boxes,etc of suitable size including 2.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. Note - Cutting and making good of chasis in wall/roof/floor is included in the qtd rates.

M&L for Point wiring with 2.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in wall/floor PVC medium grade conduit not less than 20 mm as per IS with all fittings such as bends, tee, junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. Note - Cutting and making good of chasis in wall/roof/floor is included in the qtd rates.

Supplying and fixing in repairs Modular white cover plate with frame, 3 Module, Make Legrand /Anchor Roma/Crabetree.

Supplying and fixing in repairs Modular white cover plate with frame, 6 Module, Make Legrand /Anchor Roma/Crabetree.

Supply & fix metal fiush mounting box 3 module.

Supply & fix metal fiush mounting box 6 module.

Servicing of Inverter single phase AC input 160 to 260 V and out put 230 + 1 % of capacity 5 KVA including making electric connection cost of replacement of any related part for smooth functioning of the inverter is deemed to be included under quoted rate,Complete all as specified & as directed by Engineer-In-Charge.

Servicing the low specific gravity batteries by way of replacement of electolyte/charging and testing ,Complete all as specified & as directed by Engineer-In-Charge.

Replacement of Unservicable Battery for Invertor 12 Volt/180 Ah flooded type Make : Exide Express/Bosch/Tata BP.

Supply & fix rigid non metelic PVC conduit not less then 20mm/Casing caping exclusive of boxes (junction/terminal) but inclusive of all tee,bends, elbow, reducer bell mount tube ends and fixing accessories such as coupler, lock nuts saddles, pipe hooks etc complete all as specified & directed.

M&L wiring for circuit/ sub main wiring Flame proof of 2x1.5 Sqmm + 1x1.5 Sqmm earth wire, alongwith earth wire PVC (FRLS-H) insulated copper conductor, single core, 1100 v grade cable in Steel conduit with all flame proof fitings as tee, bend,socket,junction box etc complete all as directed by Engr -in- Charge.

M&L for Flame proof Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS-H) insulated sheathed copper stranded conductor cable run in steel conduit medium grade conduit not less than 20 mm as per IS with all flame proof fittings such as bends, tee, junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS-H) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes for one light/fan point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. Note - Cutting and making good of chasis in wall/roof/floor is included in the qtd rates.

M&L wiring for circuit/ sub main wiring of 2x2.5 Sqmm + 1x2.5 Sqmm earth wire, alongwith earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in including PVC casing caping complete all as directed by Engr -in- Charge.

M&L wiring for circuit/ sub main wiring of 2x4 Sqmm + 1x4 Sqmm earth wire, alongwith eart wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable including in PVC casing caping complete all as directed by Engr -in- Charge.

M&L wiring for circuit/ sub main wiring of 2x6 Sqmm + 1x6 Sqmm earth wire, alongwith eart wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable including surface in wall/celling/floor in PVC casing caping complete all as directed by Engr -in- Charge.

Supply and fixingTempra plug & socket DB TPN with a five pin and earth plug ( 3P+N+E) & socket complete with one no MCB 32 Amp TPN, 415 V Make- Havells cat No DHDPBTN032 or Legrand Cat. Nos 507862 or equivalent make of L&T complete all as specified & as directed by Engineer-In-Charge

Supply and fixingTempra plug & socket DB SPN with a three pin and earth plug ( (2P+E) & socket complete with one no MCB 32 Amp SPN, 240 V Make- Havells cat No DHDPBDP032 or Legrand Cat. Nos 507863 or equivalent Make of L&T,complete all as specified & as directed by Engineer-In-Charge

Supply and fixing Industrial plug with a five pin ( 3P+N+E) 32 Amp complete Make- Havells cat No DHQBB65016 or Legrand / L&T complete all as specified & as directed by Engineer-In-Charge

Supply and fixing Industrial plug with a five pin ( 2P+N) 32 Amp complete Make- Havells cat No DHQBB65016 or Legrand / L&T complete all as specified & as directed by Engineer-In-Charge

Supply and fixing wall mounted Industrial socket five pin ( ( 3P+N+E) complete , 415 Make- Havells cat No DHQDB65032 or Legrand/L&T,complete all as specified & as directed by Engineer-In-Charge

Supply and fixing wall mounted Industrial socket five pin ( ( 2P+N) complete ,240 vMake- Havells cat No DHQDB65032 or Legrand/L&T,complete all as specified & as directed by Engineer-In-Charge

Supplying and fix in repair sheet metal enclousers with socket, plug top and MCBs, single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB , single pole, 240 V of capacity 20 amps , complete all as specified and as directed by Engr-in-Charge.

Supply and fixing PVC flexible copper cable multistranded 5 core 2.5 sqmm fixed with wall with suitable size of clamp complete all as specified and as directed by engr-in-charge.

Supply and fixing PVC flexible copper cable multistranded 3 core 2.5 sqmm fixed with wall with suitable size of clamp cpmplete all as specified and as directed by engr-in-charge.

Taking down old unserviceable flame proof light any type and capacity up to 15 mtr heights, cheking all electrical connection and repair the same by replacement of unserviceable parts as tube rod, wiring etc and fixing the same at its original place.

Supply only CRYSTA LED Glass T8 tube rod with in built driver Double sided connection. 1x20 Watt (Double sided connection) (4 ft) . Make - Crompton Cat NoLGT8- 20-865-2 or Havells/Bajaj.

Taking down old unserviceable street light fittings /high way light /flood light/Watch tower light ) of any type and capacity up to 15 mtr heights and deposited to MES store yard for further disposal.

Supply, Installation, Testing and commissioning LED Flood light fittings 80 watt with 110 lm/ watt system lumen output . The luminaire should have cool white coloure temperature with minimum 5700K . The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, input voltage 140-270V, PF >0.95 Make Crompton CAT No LHB11-80-CDL/60-M or equivalent in Havells/BAJAJ/SURYA .complete all as specified and directed by Engineer- in-charge.

Supply, Installation, Testing and commissioning of LED Highbay 120Watt with a nominal system output of 12000 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50000 burning hours at L70. the lminaire should have a colour temprature of 5700K and CRI>70. The luminaire shall meet IP66 raiting with THD < 10% and PF >0.95. The luminaire housing should mad eof High Pressure die cast Aluminium with loop in loop out, lense on each LED. LED used should be high power LED placed on ceramic base chip. Driver should be potted.The total power consumption should not exceed 120W (Including driver) Make Crompton Cat.Part.No.LHB11-120-CDL/60-M" or equivalent model of Bajaj, HAVELLS and Surya.

Repair of Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLS) insulated sheathed copper stranded conductor cable run in PVC conduit in concealed or cassing capping as reqd at site with all fittings such as bends, tee, junction boxes,etc with suitable size of 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly for one light/fan/call bell point complete all as specified and as directed by Engr -in -Charge. Note - Cutting and making good of chasis in wall/roof/floor is included in the qtd rates.

Supply and fix in repair 36W LED 5700K Ultra modern recess mounting luminare suitable for armstrong/ grid/ POP ceiling complete with separate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting, complete all as specified and directed by Engineer-in-charge. MAKE : CROMPTON , Model No. LCTLRNE-36-FO-CDL or equivalent in Bajaj/HAVELLS.

Supply and fix suspended 40 watt CONSTA LED linear lighting system suitable for continous mounting, frosted PMMA diffuser and high reflective aluminium reflector provided with surge compressor of 2.5kv to perform an erratic power condition, IP 20 CLASS I, 5700 K complete with connecting accessories & driver duly pre-wired and connecting up with 0.5 sq mm 3 core flexible copper cable cord from fitting, with suspension system as per site requirement complete all as specified and as directed by engineer in charge. Make: Havells Model No. CONSTA1144LP40WLED830SPCWH or equivalent in Cromptom/Bajaj

Supply and fix in repair Highly robust industrial box type luminaire suitable for single T8 LED tube 18/ 20W LED 6000K, complete with one nos LED Tube rod 10/20 watt complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No.IGP161LT8-16 or equivalent in Bajaj/ HAVELLS.

Supply and fix in repair Highly robust industrial box type luminaire suitable for touble T8 LED tube 18/ 20W LED 6000K, complete with two nos LED Tube rod 10/20 watt complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No.IGP162LT8-16 or equivalent in Bajaj/ HAVELLS.

Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded with extruded aluminium housing, energy efficent ready to use pack 20W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No. CCS-103-20-65-SL-DP-NWH or equivalent in Bajaj/ HAVELLS.

Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 10 W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No CCS-103-10-65-SL-DP-NWH or equivalent in Bajaj/ HAVELLS.

Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 5W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No..LDLL05-WW or equivalent in Bajaj/ HAVELLS.

Supply and fix in repair Switch piano flush type single pole one way 5 Amp , Make Anchor/ Havells Rio,Complete all as specified & as directed by Engineer-In-Charge.

Note applicable for BOQ item no-45 to 113 (a)contractor rep/ superviser shall be present at office of Engineer-In-Charge at 9AM every day for taking of instruction regarding repairs to be carried out on the day on priority,(b) alternative Electricians deploy in place of regular electrician has to work on sunday/holiday to attend faults/defects/complains.In case if electrician fails to rectify the faults then recovery shall be recovered from contractor s any due payment(c)The repair work on any single day may be order by Engineer-In Charge to be carry out in number of places/building in one day i.e in one buildings quantity of any of BOQ items to be carried may be one or more & number of BOQ items to be executed on any single day may also be one or more(d) Contractor shall not have any claim on account of order of one or more quantity of one or more items of BOQ that to be executed in one or more building and or area in any single day & even the same on any numbers of day during contract period(f) all above mentioned labour effect on this account is deemed to be included in quoted rates by the tenderer for all items of this tender.Note:1) Complaints/Defects will be rectified withen 8 Hrs of intimated time. if complaints not rectified, a recovery of an amount of Rs150/-/ complains/ day will be recoverd from the RAR/ FB , ii) Rates are inclusive of T&P required safety equipment, and transport required contractor shall arrange on his own arrangement, iii).Compliant given by any electronic media i.e SMS, email or whats app etc and in writting shall be count as valid compliant contractor to take immediate action within stipulated time as mention in note -1 above.

Supply and fix in repair Modular switch one way 6 Amp,1 Module , Make Anchor/Roma/Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular switch one way 16 Amp, 1 Module , Make Anchor/ Roma,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular bell push 6 Amp,1 Module , Make Anchor/ Roma/Legrand,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular Fan regulator electronic step type 230 V 2 Module. Make : Anchor/Roma Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular Socket outlet 6A/16 Amps 2/3 pin combined 2 module Make : Anchor/Roma. ,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Modular Socket outlet 6 Amps 2/3 pin combined 2 module Make : Anchor/Roma ,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Bell push flush type 5 Amps. Make : Anchor/HavellsRio,Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair Fan regulator electronic step type 230 V. 120W . Make : Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Bell buzzer,AC 230 Volts single pole. Make : Anchor/Press Fit,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Ding Dong AC 230 Volts single pole. Make : Anchor/Press Fit,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Socket out let 2 in 1, 5 pin 5 Amps flush type. Make : Anchor/HavellsRio.,Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair PVC Box with Switch socket combination outlet 5 pin 6 Amps 16 Amps 2 in 1 flush type.Make: Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.Make

Supply and fix in repair PVC Box with Switch socket combination outlet 5 pin 5 Amps 2 in 1 flush type Make : Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Switch socket combination outlet 5 pin 6 Amps 16 Amps 2 in 1 flush type.Make: Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Switch socket combination outlet 5 pin 5 Amps 2 in 1 flush type Make : Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Industrial Plug top 3 pin 5/6 Amps as per sample.

Supply and fix in repair Industrial Plug top 4/5 pin 15 Amps as per sample.

Supply and fix in repair Plug top 3 pin 5 Amps Make Anchor/Leader/Cona

Supply and fix in repair Plug top 3 pin 15 Amps Make Anchor/Leader/Cona

Supply and fix in repair Lamp holder PVC/polycarbonate insulated body with back plate suitable for angle fittings. Make : Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair LED Lamp 9 watt/12 watt Make : Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair LED Lamp 30/35 watt pin/screw as reqd at site Make : Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm three terminals. Make : AnchorHavells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA C series. Cat part No-408595 Make : Legrand/ L & T./Standard ,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair MCB SPN 32 to 40 Amps 240 volts 10 KA. Cat Part No-408617 Make : Legrand /Standard/L & T,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair MCB TPN 32 to 40 Amps 240 volts 10 KA. Cat Part No- 408680 Make : Legrand Standard L & T,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair MCB TPN 63 to 100 Amps 240 volts 10 KA. Cat Part No-408683 Make : Legrand Standard /L & T,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Sheet metal enclosure for DB’s 2 way 240 volts. Make : Standard/HPL/Legrand,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 200 amps rated bus bar , 4 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 200 amps rated bus bar ,8 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Sheet metal enclosure for DB’s TPN, with 100 amps rated bus bar , 4 way ,415 volts double door. Make :Standard/Legrand/L&T.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix sheet metal distribution board 415volt,Vertical TPN 4 Way with provision for DHx100 series MCCB of legrand make as incomer and SP/TP MCBs as outgoing as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-43 protection of L&T Cat No DBVTL004GD or equivalent in Legrand/Siemens.,Complete all as specified & as directed by Engineer-In-Charge.

S&F MCCB TP ,Thermal magnatic with enclouser , 415 Volts,50 HZ, 30 KA, 100 Amps DU-100H Cat No CM9789400k2 of L&T or equivalent Model of Legrand, Siemens.,Complete all as specified & as directed by Engineer-In-Charge.

Supply & Fix in repairs MCB TP 32 Amps 415 volts 50HZ of Legrand Cat No 4086 58 or equivalent in L&T /Seimens. ,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair PVC rectangular board 100 mm x 100 mmx 50 mm deep. Make : Press Fit or equavelent ,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair PVC rectangular board 175mm x 100mmx50mm deep. Make : Press Fit or equavelent.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair PVC rectangular board 200mmx150mmx50mm deep. Make : Press Fit or equavelent.,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair PVC rectangular board 250mmx200mmx50mm deep. Make : Press Fit or equavelent .

Disconnecting all existing electric supply and taking down carefully ceilling/ exhaust/cabin/wall fan of any make and sweep dismantlling blades, checking for repairs required ( Note: Repairs/ Replacement of spares shall be carreied under appropriate items. for C/fan, Exhaust fan . The item will be taken down and brought to MES yard for repairs, i.eoveroiling,rewinding,replacement of bush/bearing, brazing/machine work, painting and after testing at MES store yard Cost for transportation from site to MES store yard & vice versa is deemeed to be included under the quoted rate

Hanging/fixing only ceiling fans of any make and sweep connecting the complete with & including provision of copper conductor cord 3 core PVC insulated and sheathed 0.5 Sqmm from ceiling rose to exhaust fan connector and testing as directed and specified( Note: The exhaust fan shall be fitted with new set of clamps, rubber shackle split pins and top and bottom nut bolts etc.).

Hanging/fixing only exhaust/cabin/wall fan of any make or sweep connecting up complete with and including provision of copper conductor cord 3 core PVC insulated and sheathed from celing rose to fan connector & testing as directed and specified. ( Note: The Exhaust fan shall be fitted with new set of washers, nuts, rubber packing etc.)

M & L for Opening up of fan, motor of fan, cleaning stator,rotor, cleaning of all parts greasing oiling of bushes and bearing reassembling and testing for smooth functioning for celling fan 1200 mm sweep Note;-rate shall be quoted for taking down & refixing of ceiling fan afterrepair work

All as per item No 88 but for Exhaust fan 300/375/450mm sweep

M & L for removing the burnt winding and rewinding the fan with super enamelled copper winding wire of suitable gauge, insulating, putting sleeves etc complete all as specified and directed by Engineer-in-Charge for celing fan 1200 mm sweep

All as per item No 90 but for Exhaust fan 300/380 mm sweep

Supply only gun metal bush/bearing in repairs or replacement forceling fan 1200 mm sweep

All as per item No 92 but for Exhaust fan of any type

S&F in repairs Fan capacitor 2.5 MFD, 250 V.

S&F in repairs capacitor 4.0 MFD, 250 V Heavy duty.

Supply and fixing in replacement fan motor suitable for PCV exhaust fan 230/300 mm complete Note;-rate shall be quoted for taking down & refixing of exhaust ceiling fn afterrepair work

S&F fan clamp assembly consisting of nut, bolts, washers and split pin alongwith suitable size rubber real for mounting of fan down rod.

M&L for down rod 1000 mm long for ceilling fan of any make and sweep made out of medium grade GI tubing 15 mm dia duly painted with two coats of enamel paint and provision of holes for electric wire at top and bottom also arrangemnts for fittment of ceiling fan motor,clamp assembly and condensor all specified and directed by Engineer in charge

All as per item No 98 do but 1500 mm

M&L for Machine work such as fan hook,FI clamps, nuts, bolts, washers etc duly painted complete all as specified & directed by Engineer-in-Charge.

S&F copper flexible twin twisted cable of size 23/ 0.0076 .

Taking down ceiling 1200/1400 mm fan at site by disconnecting all electrical connection, dismantling blades, scraping down old paint , rust, dirt, grease etc cleaning and preparation of motors and blades surfaces, and spray painting with two coats of approved apcolite enamel paint over all as directed by Engr-in-charge.

S&F louver complete for exhaust fan of size 300mm , made of iron/ aluminium (As Sample approved ) of matching colour with exhaust fan of suitable size ,duly grauted bolts in the wall fixed with nuts, bolt and washers and making good the plastering by matching colour with existing colour to the disturbed surface of wall complete

All as per item no 103 but for exhaust fan of size 380mm.

All as per item no 103 but for exhaust fan of size 450mm.

Disconnecting carefully water and electric connection from geyser, taking down carefully storage type water heater of any type and capacity and dismantling geyser by removing glass wool, thermostat, heating element for checking of defects, repalcement of defective thermostat, heating element of any capacity, indicating lamps (round/rectangular) flange assembly, top or bottom cover half round plate glass wool etc where required, cleaning of inner container by anti corrosive liquid removing scales repair by brazing, Re-assemblong of geyser and refixing at its original location and testing complete(Replacement of spares such as heating element , thermostat, indicating lamp, top and bottom cover, half round plate, glass wool heating flange assembly will be measured and paid under relevent items) all as directed

M&L for replacement of heating assembly (flange) made out of copper/steel as existing including heat resistance and leak proof gasket suitable for 25 ltrs capacity geyser all as directed Make : Ditzs/ Racold/ Shakti/Spheroat

All as per item No 107 above but for 35/50 lts capacity

S & F Power Board suitable for 50/35/25 Ltr Digital Square water heater /geyser as per sample Make : Jaquar or equilivalent

S&F in repair thermostat having range 0 to 100 C for geyser as original size of 25/35/50ltrs capacity geyser sutiable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair heating element 2 KW with round or triangular base for 50 ltrs capacity geyser sutiable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair heating element 1.5 KW with round or triangular base for 35 ltrs capacity geyser sutiable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair heating element 1 KW with round or triangular base for 25 ltrs capacity geyser sutiable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair lamp indicator with red colour 230 volts complete with fixing arrangement round or rectangular shape and size as per existing geyser suitable for Ditzs/ Racold/ Shakti/Spheroat Make.

S&F in repair cord flexible 230 volts 3 core 2.5 sqmm copper conductor PVC insulated and sheated cable from geyser to power point to each geyser all as directed

MAHIMA CONSTRUCTION

K R Electricals

LOKMANYA ENTERPRISES

SHRI SULAI ELECTRICALS

United Enterprises

YASHRAJ ELECTRICALS