NIT24Item1

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size MS.box & earthing the point with 1.5 sq. mm. FR PVC insulated copper conductor single core cable etc as reqd.

Wiring for circuit / sub main wiring along with earth wire with the following. Sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2 X 1.5 Sq. mm. + 1 X 1.5 Sq. mm. earth wire.

2 X 2.5 Sq. mm. + 1 X 2.5 Sq. mm. earth wire.

2 X 4 sq. mm + 1 X 4 sq. mm earth wire.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 200 mm X 125 mm X 60 mm deep

150 mm X 75 mm X 60 mm deep

100 mm X 100 mm X 60 mm deep

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)-

Supplyof 63 amps. TPN, switch disconnector fuse unit (Panel mounted type) with ISI marked HRC fuses

Supplying & Fixing 5 amp. to 32 amp. rating 240 volt miniature circuit breaker suitable for lighting and other loads of following pole MCB DB etc. as required. Single Pole

Double Pole.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply /fixing of following Piano type switch socket on the existing switch box / cover including connection etc as required.5/6 amp switch.

15/16 amp switch.

3 pin 5/6 amp socket.

6 pin 15/16 amp socket.

Bell Push.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/ angle holder including connections etc. as required.

Supply of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. DJB SOR -19.10.6 Wattage -70/72W LED Make: Havells /Bajaj/Crompton / Philips/HPL/ approved make of DJB.

Supplying and fixing of 32 mm dia X 2.00-meter-long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supply of 3 core 10 sq. mm armored aluminum conductor PVC insulated and PVC sheathed cable. Make: Grandly/Havells/ Polycab / ICC/DJB approved makes.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

Supply of LED decorative diffuser 2x2 panel light FLAT 2X2PLR 36/40W

Supply of Higher Wattage Decorative ultra slim aluminum LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. (Make :- Bajaj / Phillips / Crompton ).wattage - 24 W LED

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.( 20 LED +22 Street light )

Supply of 1200 mm. Sweep Ceiling Fans. Make :- ( Bajaj / Khaitan / Crompton ).

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required

Supply of Heavy Duty Exhaust Fans size 450 mm

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

K R ELECTRICAL

Devraj Enterprises

ISHIKA ASSOCIATES

P.K. Electricals

Premier Engineering Company