Special repairs to Bldg No P-03 at AHQ Lodhi Camp in the AOR of AGE B/R Kashmir House under GE New Delhi, Delhi Cantt-10

Amount

M&L for Glazed ceramic coloured tiles of approved colour and design on vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles on and including rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 including dismantling of floor, hearth or wall tiling including cement mortar bedding removing the debris or rubbish outside MOD land complete all as specified and directed.

M&L for Non skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles on and including screed bed or bedding layer 15 mm thick for laying floor finishes with cement mortar 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding removing the debris or rubbish outside MOD land complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws and washer complete all as specified and directed.

Taking down chowkhats or frame of any description exc 1.5 Sqm but not exc 4 Sqm each with shutters(without taking off shutters from the frame) complete all as specified and directed..

Taking down chowkhats or frame of any description n.exc 1.5 Sqm each with shutters without taking off shutters from the frame complete all as specified and directed.

S&F powder coated aluminum frame/guiding rail for sliding or side hung window/ventilators and for sliding shutters with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed.

S&F powder coated Anodised aluminum door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & directed.

S&F powder coated aluminum shutter glazed/gauzed window and ventilators shutters powder coating side hung type without sash bar aluminum section weighting 0.55 kg per metre Including necessary joining cleats, glazing clips, rubber packing, anodized aluminum beading, screws including fittings such as peg stays 150 mm long, hinges 100 mm long & suitable handle complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality in Square exc 0.50 Sqm each for aluminium window shutters/door shutters complete all as specified and directed.

S&F powder coated aluminium ornamental grills for window frame complete all as specified and directed.

S&F in repairs, aluminium (extruded section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F mild steel mortice lock vertical type 100 mm size, 4 levers complete all as specified and directed.

S&F Aluminium alloy, anodized sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded section, bolt not less than 16 mm dia, 300 mm long (ISI Marked)complete all as specified and directed.

S&F 300 mm size aluminium anodized barrel tower bolt/extruded section & fixed complete all as specified directed.

S&F 200 mm size aluminium anodized barrel tower bolt/extruded section & fixed complete all as specified directed.

S&F floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring of 140 mm length complete all as specified directed.

M&L for 15 mm thick cement plaster in CM 1:6 on other than fair face of brick work or stone masonry, finishing even and smooth without using extra cement including taking down cement plaster on brick or stone walls etc. ,racking out of joints, hacking for key, scrubbing down with water and disposal of rubbish out side defence land complete all as specified and directed

M&L for cement plaster 10 mm thick in CM 1:3 on ceilings surfaces, finished even and smooth without using extra cement including taking down cement plaster on ceiling etc. , hacking for key, scrubbing down with water and disposal of rubbish out side defence land complete all as specified and directed

M&L for 15 mm thick cement plastering in CM 1:4 on fair faces of brick work or concrete surface etc. finished even & smooth without using extra cement including taking down cement plaster on brick or stone walls etc., racking out of joints, hacking for key, scrubbing down with water and disposal of rubbish out side defense land complete all as specified and directed.

M&L for two coat of distemper oil emulsion white or tinted (as approved) over a coat of primer(alkali resistant) including preparation of newly plastered surfaces of walls complete all as specified and directed.

M&L for two coat of distemper oil emulsion white or tinted (as approved) over a coat of primer(alkali resistant) including preparation of newly plastered surfaces of ceiling complete all as specified and directed.

M&L for two coat of cement base paint (as approved) over a one coat of primer(alkali resistant) including preparation of newly plastered surface of walls complete all as specified and directed.

M&L for two coat of oil bound distemper including preparation to achieve even & smooth surface by application of wall care putty on old plastered surfaces of walls complete all as specified and directed.

Demolition of brick work built in Cement mortar or cement lime mortar including all quoins, arches , pillar etc. complete all as specified and directed.

M&L for Brick work with sub-class `B' old size bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM 1:6 on fair face of brick work or concrete surface finishes even and smooth without using extra cement complete all as specified and directed.

Dismantling boarding, any description, fixed in any position complete all as specified and directed.

M&L for GI Powder coated micro perforated micro look false ceiling with fleece lay-in-type 0.50mm thick, suitable for grid/frame module of 600 x 600 mm size complete with GI powder coated grid consisting of silhonthe main T runner 15mm suspended at center to center and cross T runner of 15mm size suspended at 600mm center to center including steel fastener wall angle and T wall interlocking arrangement as required for framing grid suitable for module size 600 x 600 mm etc. complete all as per specification and directed. Make:- Armstrong/ Dextune/ HI-Steel.

S & F hangers 6 mm dia. GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) including valve less syphonic action type PVC low level flushing cistern of 10 ltrs capacity with inlet ball valve float & handle incl. brackets complete with plastic water closet seat white closed pattern with flat bottom & cover & mild steel chromium plated or aluminium hinges device & flush pipe of polythene of low or high density PVC 32 mm dia for low level PVC cistern complete all as specified and directed. Make: NEYCER/PARRY WARE/CERA Ist quality.

S&F in repair vitreous china wash basin 550 mm x 400 mm oval shape including brass chromium plated waste coupling for WHB with long screwed and shanks and fly nuts, flanged end bedded in red lead cement and other end fixed, PVC waste pipe 40 mm dia connected to floor trap for drain out, including fitting of basin in the granite slab including moulding of corners complete all as specified. Make: NEYCER/PARRY WARE/CERA Ist quality.

Supply & fixing as in repair chromium plated health faucet of PVC with flexible pipe (Minimum 1 metre long) complete all as specified and directed.

S&F in repair brass chromium plated soap dish, standard size complete all as specified.

S&F in repair 15 mm size PVC connection 450 mm long including PTMT nuts and PVC washers at both ends screwed both ends for iron pipe (ISI Marked).

S&F as in repair bib taps fancy type chromium plated 15 mm dia cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule over and including extension piece and CP cup (concealed type) complete all as specified and directed.

S&F as in repair stop valves for 15 mm dia pipe fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screw down high pressure crutch or butterfly handle for pipe or unions including CP cup complete all as specified and directed.

S&F in repairs 15 mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe (fancy type long swan neck) and fixed complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for cement concrete type C2 (1:3:6) using 40 mm aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described and priming with red oxide, zinc chrome and painting with two coats of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Dismantling framed work timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles to roof truss , as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe. 290. Gde-E-165 (Brackets over 10 kg each to be measured under srl item No. 48 here-in-after) for purlins etc. complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces steel and iron surface of any description not otherwise described over 10 cm width or girth and painting with one coat of synthetic enamel paint over priming with complete all as specified and directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including dismantling of old interlocking tiles complete all as specified and directed.

M&L for 40 mm thick fine aggregate (Sand) bedding for interlocking tiles complete all as specified and directed.

Dismantling of stone slabs and Cement concrete tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. including removing the demolished material outside the MOD land complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 (using 20 mm graded crushed stone aggregate) 50 mm thick finished even and fair with out using extra cement complete all as specified and directed .

M&L for Chequered cement concrete tiles 20 cm X 20 cm X 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old wooden surfaces over a coat of pink primer including preparation of surfaces over 10 cm width of girth including complete removal of existing paint complete all as specified and directed.

M&L for 20 mm thick white makrana marble for selves/counter in one piece over 10 mm thick screed bed in cement mortar 1:4 including cutting, jointing and polishing complete all as specified and directed.

M&L for 18 mm thick granite black (table rubbed and polished for wall lining and pointing with white cement 1:2 using marble dust with admixture of pigment to match with the shade of granite stone incl. cutting and polishing over 10 mm thick screed bed in CM 1:4 complete colour and size as approved by GE complete all as specified and directed.

S&F 18/19 mm thick exterior grade prelaminated particle board(Prelaminated on one side) as in shelves/CB shutter, pelmet including 6 mm thick teak wood leaping and necessary rebating for double shutter where required including polishing to leaping complete all as specified and directed.

S&F 18/19 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination for making open cabinets and shelves like fixed with screws in narrow width and making complete all as specified and directed

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc. and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L in replacement of point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories, provn of new galvanised MS sunken box and new hylum sheet 3 mm thick of suitable size, ISI marked for housing the switches and sockets, complete all as specified and directed for the following :-

One light/fan/exhaust fan point controlled by one no. one way switch.

One bell / buzzer point controlled by one bell push

One three pin 5 Amp socket outlet point controlled by one no. one way switch on independent board

One three pin 5 Amp socket outlet point controlled by one no. one way switch on same board

All as per item No. 62 here in before but with 2.5 Sqmm (for phase & neutral) and 2.5 Sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.

S & F following switches, piano type, flush mounted 230/250 volts grade, on top covers (catered in point wiring above) complete all as specified and directed.

Single pole, one way piano type, flush mounted switch, 5 Amp rating .

Bell push 6 A with Neon flush type 240 volts .

Single pole, one way, piano type, flush mounted switch, 15 Amp rating.

S & F following socket outlet, multipurpose type, non-shuttered, non-interlocking, flush mounting type, 230/250 volts grade on top covers (catered in point wiring above) complete all as specified and directed.

3 Pin 5 Amp socket outlet (with 2 pin outlet also) .

5 Pin 15 Amp & 5 Amp multipurpose socket outlet.

S&F ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body complete all as specified and directed.

Disconnecting mains connection and taking out old sub main wiring two single core 4/6/10 Sqmm and one single core 4/6 Sqmm aluminum conductor cable from the concealed conduit/ from the wall or ceiling and making good to the disturbed surface all as specified.

M&L for sub main wiring with PVC insulated unsheathed copper conductor multi stranded, single core 1100 V grade 2 x 10 Sqmm complete drawn in and including medium grade rigid non-metallic PVC concealed conduit of 25 mm dia and its accessories along with 1x 10 Sqmm PVC insulated unsheathed copper conductor multi stranded single core copper cable for continuous earth wire and duly connected to common earth dolly all as specified and directed. Note: -The specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one unit length. Make:- Havells/ Ploycab/ Finolex

All as per item No. 68 here in before but two run with 6.0 Sqmm for phase & neutral and one run with 6.0 Sqmm for continuous earth wire cable.

All as per item No. 68 above here in before but two run with 4.0 Sqmm for phase & neutral and one run with 4.0 Sqmm for continuous earth wire cable.

Supply and fix in replacement of factory made sheet steel enclosure (DB) modular type with metal clad 2 pin and earth plug and socket SPN, 20 amps, 240 volts AC complete with one SP MCB, 20 Amps complete all as specified and directed.

Disconnecting mains connection and taking out old distribution board 8/12 way SPN with 200 amp rated bus bar complete all as specified and directed. .

S&F factory made, sheet steel distribution boards, SPN 8 ways, double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar complete all as specified and directed. Make-product code-5076 11 of Legrand or equivalent of Havells/Indoasian.

S&F factory made, sheet steel distribution boards, double door, SPN, 12 way, concealed type, 240 volts AC with suitable busbar, neutral link, earth link etc. suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed. Make-product code-5076 12 of Legrand or equivalent of Havells/Indoasian.

S&F MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

MCB SP 6 to 32 Amps MAKE:-product code-4085 90 of Legrand or equivalent of Havells/Indoasian.

MCB SP 40 to 63 Amps MAKE:-product code-4085 90 of Legrand or equivalent of Havells/Indoasian.

MCB SPN 40 to 63 Amps MAKE:-product code-4086 18 of Legrand or equivalent of Havells/Indoasian.

S&F recess mounted (2'X2') slim LED light fitting 36 Watt complete for ceiling mounting, energy saving ,powder coated panel 230 Volt 50 Hz. complete all as specified and directed. Make- Havells Cat No-LHEWEBP7IL1W036 or equivalent of CG /Philips

S&F in replacement LED Tube light fitting 8-10 watt ( 2 ft ) white 230 Volt AC complete including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make CG Cat Part No LCCLB08-CDL / Havells cat part No-LHEXBQP7IN1W009 or equivalent of Philips

S&F LED Tube Light of 20 - 24 Watt 230 Volt(size 4 ft) , box type complete with LED Tube Light 24 Watt & all accessories internally prewired including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified & directed Make-CG cat part no.-LCCLB24-CDL, Havells cat part No-LHEWEBP7IN1W020 or equivalent of Philips

M&L for taking down of ceiling fan of any size and servicing complete, greasing, painting ,changing of ball bearing of any type, Copper rewinding and marking of MES No. etc. at site and refixing complete all as specified & directed. .

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc. as required complete all as specified & directed.

Taking down/ dismantling of air ventilation fan, size 250 mm including fan blade and louvers complete in all respect complete all as specified & directed. Note:-The air ventilation fan with complete accessories to be safely deposited to MES store yard.

S&F in Air ventilation fan 250 mm size suitable for 240 V, 50 Hz single phase AC supply including fixing on wall with nut, washer etc. complete and necessary electrical connection from ceiling rose to fan connecter with three core sheathed wire of required length complete all as specified & directed. Make:-cat part no brisk Air 10'' of Crompton or equivalent of Havells/Bajaj.

Earthing complete with galvanised steel earth plate electrode, 60 CM x 60 cm x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0 mm dia up to 7.50 RM by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR connected to earthing test point all as specified or indicated including testing on completion complete all as specified & directed.

S&F in replacement earth continuity conductor of size 4 mm dia galvanised iron or steel wire, fixed on wall/buried in ground with and including of fixing arrangements as walls like dash fastener, nuts, bolts, screws, washer etc. complete all as specified and as directed.

Disconnecting electrical connection and taking out old unserviceable load line DB's complete all as specified and directed.

S&F factory made load line DB's double door made out of 2.15 CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TPN 100 Amp, 25 KA as incomer &including MCB SP 6/10/32/40 Amp of 10 KA capacity 12 Nos as out going complete all as specified and directed. MAKE:-Legrand/Havells/Indoasian. Note: The rate of MCB should be included in the quoted rate

Supply and fixing MCCB, 4 pole, 415 volt of capacity 100 amp, breaking capacity not less than 25 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc. and connections, replacement of thimbles, minor parts like nuts bolts washer etc. all as specified and directed . Make : Legrand cat part No 5077 45 or equivalent Schneider/L&T.

S&F electric bell Ding Dong AC 230 Volt complete all as specified and directed . Make:-Anchor/Cona/Havells

S&F 400 mm sweep wall mounting fan fixed on wall complete all as specified & directed. Make- Havells/CG/Bajaj

S&F 4 watt LED Spot light fitting complete with LED lamp and all accessories internally pre wired and connecting copper conductor cable of suitable size complete all as specified & directed. Make- Philips of Cat No- 56240 or equivalent of Havells /CG

S&F surface mounting 1 X 4 LED Tube Light fitting of 36 Watt 230 Volt , box type complete with all accessories internally prewired including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified & directed. Make-CG Cat Part no-LCPL-36-CDL (1 X 4) or equivalent of Havells / Philips

The new hut furnitures

B Kumar and Co

GLIBS CONSTRUCTION

BEHAL TRADERS

Shivam Firetech Engineers