SPL REPAIRS TO HALDIGHATI SAND MODEL ROOM AT FACULTY OF DOCTRINE AND TACTICS SCHOOL OF ARTY UNDER THE AOR OF GE DEVLALI

Amount

Excavating in trenches (manual excavation), n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out on soft and loose soil.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L Cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L Flyash Brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming, in layers not exc 25 cm complete all as specified and directed

M&L 75 mm thick PCC in sub base of floor type D-2 , 1:4:8 (using 40mm graded cushed stone aggregate and complete all as specified and directed.

M&L for 10mm thick Plastering in cm 1:6 on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

S&F Elegant Tile made of perforated cement fiber composite 595x595/295X1195/595X1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results Make: Himalyan Acoustics/Heradesign/BAUX/ARM STRONG

Supplying and Fixing in repair ‘APHONY FIBRETTE’ tiles made of Wood Fibre 1mm width cement composites 20mm thick(Non Magnesite bonded) with an option of colours as per the choice of the Architect/ person in charge of size 600X1200 mm. Has excellent noise absorption of 1 NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400 Kg/ m3, meets stringent Fire Ratings ASTM D- 876 and BS:476 , weather resistance as per IS 3308, Thermal Conditivity result 45 w/m2/K as per IS:3346-1980with relative humidity of 90% RH at 60o Celcius(140o Farenhite) for 15 days= No deterioration. Conforms to En 131682001 and are RoHS Complaint.Anti Bacterial test as per JIS-Z2801-2010. To be installed with Aluminium H Profile on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 thermal conductivity test , W/mk , as per ASTM C 518 test result ( SC-6490) -0.03312 for excellent results

Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete incl screed bed 15mm thick in CM 1:6 complete all as specified and directed.

All as per above but in riser of steps, skirting, dado and pillar laid over cement and including 10mm thick CM 1:4 backing coat complete all as specified and directed.

M&L for granite 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like with and including 15mm bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as directed.

Preparation of old surfaces including filling of cracks/holes by crack filler, removing unnecessary nails and applying 02 coats of Oil bound distemper (light shade) @ 12 sq.m/litre/2 coats to interior wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer by using following brands and primer complete all as specified and directed.

All as per item No. 16 above but on new surfaces of wall.

S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S&F 12 mm thick toughned glass with openable door/FIX TINTED /PLAIN FROSTED /FILM of approved design including all fittings such as Bottom patch 163x50x31mm , with Top patch, over pannel patch, Big -L , Glass door centre type lock, four side connector, Small-L, three side connector, wall fix bracket, glass to glass 180 degree connector, glass to glass 90 degree connector, Floor mechine, Pivot for top, wall to glass 90 degree connetor, wall mounted over panel patch with pivot, "H" type handle 450 mm long complete all as specified and directed Note: All fittings should be stainless steel 304 grade and approved by Engr-in-charge. Make of glass: modiguard/saint goben or equivalent, make of fittings: hafele, hettich or equivalent

Taking down chowkats or frames with Shutters (without taking off shutters from the frame 1.50 Sqm and n exc 4.00 Sqm each complete all as specified and directed

M & L for 4.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for Artificial Granite (of any type) 15mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick screed bed in CM (1:6), complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Venetian blinds (vertical rolling type) for windows made of glass fibre fabrics in width 5” (or 4”). Minimum overlapping of ¾” in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. End control box composed of double gear system. Stainless steel spacers. Botton weight fully plastic covered linked with plastic bead chain complete all as specified and directed.

S&F for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Preparation of old surfaces including crack filling with Smart Care textured crack filler, removing unnecessary nails and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (APEX SUPREMA) / Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL) .

Supply and install Vertical pack type units indoor/ outdoor complete with cordless remote control unit, twin rotary compressor, three phase units 440 volts, 50 Hz of capacity of 4TR all as specified ( Pillar AC units) Note :- Copper piping for suction and discharge line of suitable size are deemed to be included the rate quoted.

Supply and fix Thermal magnetic release MCCBs, 4 pole, 415 volts, breaking capacity 25 KA, rating 160 Amps, complete all as specified and directed

Supply and fix MCBs Triple pole, 415 volts, breaking capacity 10 KA , B curve rating 63 Amps complete all as specified and as directed.

S&F Plug & Socket DB, CRCA Sheet steel, powder coated, with metal plug & socket 3 pin with 63 AmpsTriple pole MCBs complete as specified and directed

M& L submain wiring with four single core cable PVC insulated unsheathed, stranded copper conductor cable (FRLS) 1100 volts grade of size 6 sqmm ( Nominal area) each and one single core 6 sqmm cable as earth continuity conductor drawn into concealed PVC casing caping complete all as specified and directed. Note:- Rates for PVC Casing caping with accessories are deemed to be included in the unit rate

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.

Taking down unserviceable sub mains wiring including earth continuity any type / size with surface casing / caping / TW batten / PVC conduit surface or recess and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DB etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable of FRLSH and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLSH, PVC insulated sheathed cable in and including PVC rigid conduit of suitable size, duly concealed/open in wall,ceiling, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters in and including cover plate etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-

One light point controlled by one switch

One fan point (Ceiling, wall and Exhaust) controlled by one switch

One 5 pin, 6 A socket outlet on the same board

One 5 pin, 6 A socket outlet on the independent board.

All as per item No 37 here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 2.5 sqmm size cable as earth continuity conductor for one 15 Amps socket outlet independent -ditto-

S&F for Modular type switch, 1 way,6 Amps, 1 module

S&F for Modular type socket, 2 & 3 pin combined, 6 Amps, 2 module

S&F for Modular type switch, 1 way, 16 Amps, 1 module

S&F for Modular type socket, 3 pin, 6 Amps / 16 Amps combined, 2 module

Supply and fix wall fan 450 mm dia, double bearing with clamp and necessary electric connections all as specified and directed Make - Havells Sprint Hi-Speed

Supply and fix CV Exhaust fan Usha Crisp Air Premia , 260 mm frame size White colur and necessary electric connections and making of necessary holes for fixing exhaust fan by cutting brick masonry wall and finish with existing wall all as specified and directed Make - Usha or equivalent in Crompton/Havells

M & L for power line sheet metal enclosure double door surface mounting distribution board suitable for MCCB as incomer for 415 Volts 4 way with 200 Amps bus bar including MCCB 100 A 4pole-01 No as incomer and MCB SP 32/40 Amps-12 Nos as out going.

M&L for MCCB TPN 100 Amps, 30KA, 440V 50Hz,

S&F 34 watt Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling.

supply and install LED spot light specially designed for commercial usage long life with 30000 burning hours with CRI > 80 of capacity 50 watt all as specified and directed

Supply and install LED spot light specially designed for commercial usage long life with 30000 burning hours with CRI > 80 of capacity 18 watt all as specified and directed

S&F Sheet Metal enclosure for SPN DBs, 12 Ways, Double Door(IP-43), built- in bus bars complete suitable for 240 Volts, AC, 50 Hz complete all as specified and as directed Make: L&T / Legrand /C&S/Havells

S&F MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed. Make: L&T / Legrand /C&S/Havells

S&F MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed.

M & L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No - 52 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

All as per item No - 52 above but with 2 runs of 2.5 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

All as per item No - 52 above but with 2 runs of 1.5 Sqmm cable with one run of 1.5 Sqmm cable for earthing.

M&L for earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

Note: Amount of sch of credit of Rs.21109/-will be deducted from total amount of BOQ.

M/S MANISH CONSTRUCTION CO

sunway associates

MANOVANDANA CONSTRUCTION

M/s M R MAHANA