KMC/RRD/14/25-26

TOTAL

Item Rate BoQ

BoQ_Ver3.0

WORK NAME: REPAIRING, OVERHAULING AND MAINTENANCE OF ENGINE, CLUTCH, RADIATOR WITH OTHER ALLIED WORKS OF ROAD ROLLER NO. OC-21 ( JESSOP MAKE, 5 - 6 TON CAPACITY) AT ROAD ROLLER DEPARTMENT

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

DISMENTLING, OVERHOULING & FITTING, FIXING THE ENGINE BY REPLACEMENT OF THE WORN-OUT SPARES LIKE LINEAR, CONNECTING BUSH(GM), MAIN BEARING,MAIN BEARING OIL SEAL, BOOSTER OIL SEAL,GASKET SEAT, WATER JACKET,PISTON RING, MOBILE JACKET, THROUST WASHER ETC. WITH ACID WASH.

DISMENTLING,OVERHAULING AND REPAIRING AND FITTING , FIXING THE ENGINE HEAD ASSEMBLY WITH REPLACEMENT OF WORN-OUT SPARES LIKE VALVE, VALVE SEAT, VALVE GUIDE, VALVE OIL SEAL, WATER PACKING, GASKET ETC AND ACID WASH

REPAIRING & SERVICING OF F.I.P AND INJECTORS WITH SUPPLYING, FITTING, FIXING AND CHANGING BY NEW ONE AFTER DISCARDING THE WORN OUT SPARES.

THROUGH CHECKING OF TIMING PORTION BY REPLACEMENT AND FITTING, FIXING THE DAMAGED SPARES LIKE TIMING COVER OIL SEAL, PACKING OF TIMING COVER (INSIDE AND OUTSIDE), TIMING LOCK PLATE, TIMING CHAIN KIT, CAM SHAFT LOCK BOLT,TIMING HOUSING BOLT ETC.

THROUGH CHECKING FUEL LINE WITH REPLACEMENT OF NEW AFTER DISCARDING THE DAMAGED PART LIKE DIESEL FILTER, O-RING , DIESEL PIPE WITH CLAMP, DIESEL PIPE BANJO BOLT, WASHER, DIESEL COCK , DISEL TANK WASH ETC.

TOTAL OVERHAULING OF CLUTCH PORTION INCLUDING SUPPLYING WITH REQUIRED MACHINING, FITTING & FIXING OF NEW CLUTCH SET (CLUTCH PLATE, OIL SEAL SET, CENTER PLATE CHECK NUT, CENTER PIN R/F, DIE WITH DIE PIN , BALL FINGER WITH BOLT), ROCKER BOLT, RELASE BEARING, CLUTCH DRIVING FEMALE WITH LOCK BOLT , CLUTCH DRIVING BEARING,SPRING ASSEMBLY AFTER DISCARDING THE DAMAGED SET.

DISMANTLING OF DAMAGED RADIATOR AND SUPPLY NEW RADIATOR WITH NEW HOSE PIPES, CLAMPS ETC.

THROUGH REPAIRING OF FRONT ROLL PORTION INCLUDING SUPPLYING, FITTING, FIXING, MACHINING AND CHANGING BY NEW SPARES LIKE BUSH(C.I.),NUT, BOLT AND WASHER AND SUPPLY TWO NEW AXEL LOCK .

THROUGH REPAIRING OF REAR ROLL PORTION INCLUDING SUPPLYING, FITTING, FIXING AFTER DISCARDING THE DAMAGED PARTS LIKE BUSH,WASHER, AXEL KEY , RING GEAR WITH BOLT ETC.

DISMANTLING OF DAMAGED WATER PUMP WITH ITS ACCESSORIES AND REPAIRING WITH REPLACEMENT OF WORN OUT SPARES AND FITTING THE WATER PUMP.

DISMANTLING OLD AIR CLEANER FILTER SET AND SUPPLY WITH FITTING OF NEW AIR CLEANER FILTER WITH HOSE PIPE, HOSE CLAMP, BRACKET ETC.

THROUGH OVERHAULING OF GEAR BOX PORTION INCLUDING SUPPLYING, FITTING, FIXING OF NECESSARY SPARES, PACKING WITH REQUIRED MACHINING WORKS.

THROUGH CHECKING MOBILE LINE WITH CHANGING DAMAGED PARTS LIKE MOBILE FILTER, MOBILE PR. PIPE, MOBILE METER, MOBILE BANJO BOLT WITH WASHER ETC.

TOTAL OVERHAULING OF COUPLING PORTION INCLUDING SUPPLYING, FITTING AND FIXING OF NEW ONE SPARES AFTER DISCARDING THE WORN-OUT SPARE PARTS LIKE COUPLING PAD ( BIG & SMALL), COUPLING BOLT, TAIL PIECE ETC.

THROUGH OVERHAULING OF STEERING PORTION INCLUDING SUPPLY, FITTING, FIXING AND CHANGING BY NEW ONE LIKE LOCK PLATE WITH BOLT, SPLIT PIN, STEARING KEY ASSEMBLY AFTER DISCARDING THE DAMAGED SPARES.

DISMANTLING AND OVERHAULING THE DIFFERENCIAL AND REPAIRING , SUPPLING,FITTNG AND FIXING WORN OUT PORTION LIKE OIL SEAL SET, L.H.SLEEP BUSH(C.I.), L.H. LONG BUSH (G.M.), END PLATE BOLT(L .H AND R.H), DIFFERENTIAL AXEL WASHER, DIFFERENTIAL STUD NUT (L.H. & R.H), DIFFERENTIAL PACKING.ETC.

SUPPLYING WITH FITTING OF A.C. DYNAMOMETER (12 VOLT) WITH REQUIRED ACCESSORIES.

THROUGH CHECKING OF ELECTRICAL PORTION INCLUDING SUPPLY AND FITTING FIXING OF NEW CABLES, SWITCHES ETC.

THROUGH REPAIRING OF SELF STATER WITH CHANGING OF NECESSARY ITEM LIKE CARBON, BUSH, AUTO SWITCH, FIELD COIL ,ARMATURE ETC.

THROUGH REPAIRING OF ROOF WITH DISMANTLING OF DAMAGED STANDS ,ROOF SHEET,WOODEN PLANKS ETC.

DISMANTLING OF DRIVER SEAT AND REFITTING NEW SEAT WITH FABRICATION AND REQUIRED FOAM WITH REXINE WORK.

REPAIRING BODY BY OXYGEN CUTTING, ELECTRICAL WELDING WITH SUPPLY MATERIAL.

CLEANING, SCRAPPING, SURFACE FINISHING WORK OF TOTAL PORTION OF BODY

SUPPLY OF REQUIRED ITEMS WITH BODY PAINTING WORKS OF RED OXIDE, TWO COATS PRIMING AND TWO COATS SYNTHETIC PAINT ( ASIAN PAINTS / BERGER PAINTS) WITH LETTERING AND NUMBERING WORKS.

Please Enable Macros to View BoQ information