Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹40.6 L+₹17,758.21 (0.44%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹41.2 L+₹72,382.99 (1.79%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹41.6 L+₹1.1 L (2.73%)Rejected-AOC | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹44.0 L+₹3.5 L (8.76%)Rejected-AOC J L BHAWAN MANKAR ROAD BUD BUD BAZAR PO BUD BUD DISTT BURDWAN WB | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹49.0 L
EMD Value
₹98,100
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_558145_1
8400-869/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹98,100
Yes
9 Jan 2023
17 Oct 2022
9 Nov 2022
17 Oct 2022
7 Nov 2022
31 Oct 2022
Amount
Excavation over areas n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick ,spread, levelled and rammed including watering complete all as specified and directed.
M&L for cement concrete (1:3:6) Type C2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete ,complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 4.00 mentioned here-in-above but 6mm to 8mm dia complete all as specified and directed.
All as per item No 4.00 mentioned here-in-above but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces of concrete complete all as specified and directed
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for RCC M - 25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M - 25 (Design Mix) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan.exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall, surface finished even and smooth without using extra cement complete all as specified and directed.
Removing excavated soil to a distance n.exc.50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and as directed.
Excavating over areas n.exc 1.5 m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and getting out as in soft/loose soils complete all as specified and directed.
M&L for cement concrete (1:4:8) Type D2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.
M&L for PCC (1:2:4) 100 mm thick Type B2 (using 40 mm graded stone aggregate) used as in sub base floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for machine pressed pre-polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed. (Note: Colour and design shall be approved by the GE).
M&L for cement concrete (1:2:4), type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed
M&L for fixing PVC (SWR) pipes of 110 mm bore diameter single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for PCC (1:3:6), 75 mm thick type C2 (using 40 mm graded stone aggregate) used as in plinth protections and finishing cement concrete surface even and fair without using extra cement complete all as specified and directed
M&L for PCC (1:3:6), 100 mm thick type C2 (using 40 mm graded stone aggregate) used as in sub base of flooring complete all as specified and directed.
M&L for PCC (1:2:4), 75 mm thick type B1 (using 20 mm graded stone aggregate) used as in flooring finished even and smooth without using extra cement complete all as specified and directed.
Framed work as in doors or gates of angle Fe 410-W (Gde-E- 250) quality-A Fe or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed
Preparation of steel surfaces of any description, priming with red oxide primer and painting with synthetic enamel paint n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.
Preparing new surfaces of walls plastered and white washing with three coats of white wash on walls complete all as specified and directed.
M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed.
M&L for preparation of painting of new steel surfaces over 10 cm in width or girth over a coat of primer using red oxide and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for PCC (1:2:4) type B0 (using 12 mm graded stone aggregate) used as in filling of concrete for fixing of angle iron members complete all as specified and directed.
M&L for laying granite 20 mm thick (of any type) work(table rubbed and polished) in steps, jambs, pillar,window-cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10 mm thick screed bed in CM 1:4 complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.
M&L for cement concrete (1:2:4) Type B2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.
M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and directed.
M&L for RCC M - 30 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC M - 30 (Design Mix) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for hardcore using broken stone or boulders of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
Surface excavation n.exc (n.exceeding) 30 cm deep and averaging 15cm deep and getting out as in soft/loose soil complete all as specified and directed.
M&L for machine pressed pre-polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigments complete all as specified and directed. (Note: Colour and Design shall be approved by the GE).
M&L for PCC (1:2:4) type B0 u(sing 12.50 mm graded stone aggregate) as in copings complete all as specified and directed.
Extra for fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for DI pipe of 100 mm bore with spigot and socket end rubber gasket joint(titon) centrifugally cast class k-7 conforming to IS 8329-2000 laid in trenches/ on surface/ over masonry pillar and connection to old or new position complete all as specified and directed. (Make: Electro steel/Tata/ Jindal).
M&L for cutting cast iron pipes 100mm and reducing to required length before laying, in position for insertion of new tees, branches, etc complete all as specified and directed.
M&L for CI/DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot. All socket and flanged upto bore of 100 mm complete all as specified and directed (Note: Lead/gasket for fitting shall be measured and paid separately)
S&F 25mm bore GI tubing medium grade in trenches / Floor / pillar connection in old or new position including fittings all as specified & directed (Make: Bansal / Jindal)
All as per item No 47.00 mentioned here-in-above but 50 mm bore complete all as specified and directed
S&F 25 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.
S&F Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule for 25mm bore complete including taking down all as specified and directed.
E/M PORTIONS Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying and punned down to a thickness of 18 cm complete all as specified and directed. (Note : Punned thickness shall be measured).
M&L for laying fly ash bricks for cable protection complete all as specified and directed.
Supply, commissioning and testing Outdoor type LT Feeder pillar Box, weather proof, CPRI approved, Seven tank treatment powder coated factory made LT Panel board, totally enclosed, dust and vermin proof openable from front & back side, canopy headed, connected with suitable size MS angle iron frame, Overall dimension (900 x 900 x 600)mm for main distribution Panel, fabricated with CRCA sheet 3.15mm thick sheet including IP - 55 protection, installed on concrete base made of PCC (1:3:6) type C1 using 20mm graded aggregate, including self locking arrangement. New Panel board shall comprise of :- (a) Copper Busbar rating- 200 Amps- 04 Nos (b) Indication lamp for RYB - 01 Set (c) MCCB-160 Amp, 4 pole, 25KA Fixed Thermal & Fixed Magnetic setting, 415 V, 50 Hz AC-01 No (Incoming) (Make - GE/Schneider/Seimens) (d) MCCB-63 Amp, 4 pole, 25KA Fixed Thermal & Fixed Magnetic setting, 415 V, 50 Hz AC-02 No(Outgoing) (Make - GE/Schneider/Seimens) (e) MCB-63 Amp, 2 pole, 10KA Fixed Thermal & Fixed Magnetic setting, 415 V, 50 Hz AC-08 No(Outgoing) (Make - GE/Schneider/Seimens)
M&L and testing in trenches or passing through pipe 1100 volts grade, heavy duty XLPE insulated, screened, PVC bedded galvanized steel strip armoured heavy duty electric cable with aluminium conductor cross sectional area 50 Sqmm 3.5 core complete all as specified and directed. (Note: Earth work in.excavation, sand cushioning, cable cover, cable protection, GI pipe shall be measured and paid separately under relevant item).
All as per item No 54.00 mentioned here-in-above but 25 Sqmm 4 core complete all as specified and directed
M&L for laying or passing through pipe LT UG XLPE insulated, armoured heavy duty 1100 volts grade with aluminium stranded conductor of cross sectional area of 10 Sqmm 2 Core including taking out the old unserviceable cable complete all as specified and directed. (Make: Havels/SKEI/Polycab)
Supply and fixing/laying 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directed. (Make : TATA/JINDAL/ITC)
M&L for concealed wiring for circuit / sub main wiring along with earth wire in PVC conduit with FRLS PVC insulated copper conductor , 2 x 1.5 Sqmm + 1 x 1.5 Sqmm single core (or Three core 1.5 Sqmm copper conductor) in surface complete all as specified and as directed. (Note: (i)Quoted rate deemed to be included for necessary chasing/cutting and making good the surface (ii) Three runs cable and one unit conduit wil be measured as single unit)
S&F junction box (275 x 135 x 110)mm made of MS with IP 65 degree of protection, dust proof, water tight, light weight, acid resistant, corrosion proof insulated & shock proof, fire retardant, self extinguishing, halogen & silica free non-toxic material, UV resistant, with internally embedded gasket fitted with required terminals for up to size 25 sqmm 4 core cable and including 1x10A SP MCB fitted on DIN Rail and hinged from Top and openable from down side and cable entry from sides or down including glands for street light connection, complete all as specified and directed. (Make: Sintex (Min size 275x135x110) or equivalent make of Hensel/Spelberg)
S&F Post Top lantern LED type 20 Watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lamp complete with all accessories complete all as specified and directed.
M&L for drilling hole horizontally road under ( min 1 mtr) pavement hardstanding by treanchless technology using ultra sound technique and necessary machine suitable and including 150 mm dia HDPE pipe complete all as specified and directed.
M&L for Cement concrete (1:3:6) Type C2 (using 40 mm graded stone aggregates) as in foundations for stay set/Pole/FPB etc including fair finish even and fair to expose surfaces without using extra cement complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as coping of pole/panel including necessary form work as required complete all as specified and directed.
M/S TRIVENI BUILDERS
M/S DEBNATH MONDAL
Jaibalaji Enterprise
FRIENDS CONSTRUCTION
BABY ENGINEERING ELECTRICAL MECHANICAL STORES
SARASWATI ENTERPRISE (INDEX NO CEEC D-81)
M/S S M ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .