REPAIR TO ROLLING SHUTTER, TOILET, CUPBOARD WOODEN / ALUMINIUM PARTITION, WALL PANELLING, PLASTERING, ROOF SHEETS AND OTHER CONNECTED ITEMS ETC IN 509 ABW UNDER AGE B/R-II OF GE (EAST) AGRA

Amount

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.

Taking down shutter exc 1 Sqm and not exc 2.00 Sqm each complete all as specified and directed.

Taking down chowkats or frame exc 1.5 Sqm but n.exc 4 sqm each, complete all as specified and directed.

Fixing only old flush shutter of any thickness after necessary repair if required with old fitting area exc 1.5Sqm but not exc 4 Sqm each complete all as specified and directed.

S&F tubular steel framed work as in chowkhat / frame for single door frame of size 100 x 50 mm & thickness of tubular section will be 2.5 mm for doors with one or more rebates including necessary fixing lugs, lock, strike plate, hold fast etc complete all as specified and directed. Note : Wt. of section should not be less than 4.5 Kg/RM.

S&F tubular steel framed work as in chowkhat / frame for double door frame of size 130 x 65 mm & thickness of tubular section will be 2.5 mm for doors with one or more rebates including necessary fixing lugs, lock, strike plate, hold fast etc complete all as specified and directed. Note : Wt. of section should not be less than 6 Kg /RM.

S&F for Mild steel framed work as in chowkhat / frame of doors or gates of angle or other section with gusset plates, rails, braces, hold fast etc., complete all as specified and directed., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete, quality conforming grade Fe- 290 or E- 165 complete all as specified and directed.

S&F for 1.00 mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed.

S&F Factory made flush shutter 30 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified & directed.

S & F 30 mm thick, factory made , llnd class hard wood (Sal) glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part l, section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed

S&F of factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube, supplying & fixing in opening as per specification and drawing complete all as specified & directed. .

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F in repair MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified & directed.

S&F Aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Mild steel butt hinge medium weight cold rolled of size 100 mm long and fixed with screw/ welding complete all as specified and directed.

S&F 100 mm long extruded type B-22 aluminium alloy with galvanised mild steel hinge pin, anodised and fixed with screw/ welding complete all as specified and directed.

S&F 150 mm long aluminium anodized handle cast type complete all as specified and directed.

M&L 100 mm long aluminium anodized handle cast type complete all as specified and directed.

S&F in repair Floor door stopper 150 mm long of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor complete all specified and directed.

S&F in repair Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

M&L for welding in repairs n. exc 2.5 cm in length and n. exc 6mm thick complete all as specified & directed.

M&L for welding in repair exc 2.5 cm but n. exc 5.0 cm length and n exc 6mm thick complete all as specified & directed.

S&F in repair drapery (curtain) rod 25mm dia Stainless steel grade 304, side cups including fixing arrangement with drilling holes in walls brackets etc complete approved quality and colour complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putty or fixed with beads etc complete all as specified & directed.

S&F 3 mm thick sheet glass ordinary quantity and glazing with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and directed.

S&F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded etc complete all as specified and directed.

M&L for Two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth complete all as specified and directed.

M&L for one coats of synthetic enamel paint (Ordinary tint) including preparation of old surfaces of wood of any description not otherwise described over 10cm in width or girth complete all as specified and directed.

M&L for one coats of synthetic enamel paint (Ordinary tint) including preparation of old surfaces of steel of any description not otherwise described over 10cm in width or girth complete all as specified and directed.

M&L for Two coats of synthetic enamel paint (Ordinary tint) over a coat of red oxide primer including preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including disturbed surface of existing position complete all as specified and directed

S&F in repair Double action Floor spring hydraulically regulated made up of minimum 1.25 mm thick Al alloy sheet foundation box main of brass with stainless steel cover, governing pivot made of brass other parts are made of MS heavy duty etc complete all as specified and directed.

S&F in repair mortice lock device made of mild steel with brass coating complete with double keys for each lock etc complete all as specified and directed.

S&F in repairs rubber gasket for aluminium door and window complete all as specified and directed.

S&F in repairs aluminium beading of suitable size for fixing sheet glass in aluminium door and window complete all as specified and directed.

S&F powder coated aluminium door & frame with reqd size of aluminium sections weighing 0.55 kg/m including 5 mm thick tinted glass coloured in half portion and in other half portion 6 mm thick ACP sheet of any colour complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No Hydraulic door closer for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 64x38 mm. (b) Aluminium style/top & middle rails of shutter = 82.5x44 mm. (c) Aluminium bottom rail of shutter = 82.5x44 mm. (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.

S&F powder coated aluminium three track sliding window including frame made of extruded profiles with reqd size of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and aluminium wire cloth on one shutters with two nylon roller on each shutters including star lock handle and aluminium deco grill fixed to outer side of Al frame etc complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters including frame, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long - 1 no, hinges type B-21 100mm long- 2 no, suitable handle-1 no, complete all as specified and directed.

S&F in repair cast iron Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Taking down and refixing of aluminium shutter in the same position after repairing and making it smooth functional including replacement of unserviceable top pivot and necessary fittings to make it fully function able and adjustment of floor door stopper (size of shutter n. exc 2.50 sqm each) complete all as specified and directed.

Taking down rolling shutters area not exc 4 Sqm and re-fixing to its original position after cleaning all parts, straightening rails, changing damaged strips, bottom rail, guide rail, helical spring as required, greasing, oiling, painting servicing for smooth functioning of all parts completed all as directed for the following sizes :- Note : Lath strips, bottom rail, spring, gears, guide rail etc. will be measured and paid separately as supply only.

All as per item No 48.00 but area of rolling shutter exc 4Sqm but not exc 10 Sqm each.

All as per item No 48.00 but area of rolling shutter exc 10 Sqm and n.exc 20 Sqm each.

Supply only mild steel spring made out of 6mm to 11mm dia high tension steel wire confirming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working condition complete all as specified and directed. Note : Dia of spring 75 mm to 150mm.

Supply only gear box complete all as specified and directed.

Supply only 65 to 75mm wide guide rail, 3mm thick suitable for rolling shutter complete all as specified and directed.

Supply only 75mm wide laths strips 1mm thick for rolling shutter including mild steel clips at either ends duly painted with and including two coats of synthetic enamel paint (shades to match with the existing) over a shop coat of red oxide primer complete all as specified and directed.

Supply only mild steel bottom rail lock plate with two handles 150 mm wide and 3mm thick including necessary locking arrangement on both sides and painting to bottom rail with and including two coats of synthetic enamel paint to match with existing over a shop coat of red oxide primer complete all as specified and directed.

S&F in repair steel rolling shutters,1 mm lath thickness with ball bearing, as specified including top cover, anchoring rod, hasp and staple and gear operated type with bevel gear box and crank handle to make it fully functionable etc complete all as specified and directed.

S & F in repair of 1 mm thick top cover galvanized iron sheet for steel rolling shutters complete all as specified and directed.

Dismantling of wooden wall panelling including frame and make good the surface etc complete all as specified and directed.

S&F solid PVC Wall Lining for wall panelling consisting of 5 mm thick wood grain printed colour PVC sheet inclusive fixing with all accessories at site as per specifications and drawing complete all as specified and directed.

M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

S&F in repair aluminium powder coated partition of specified aluminium section as per required size & Wt. of section cannot be less than 0.55 Kg / Rm including aluminium beads rubber gasket and 5 mm thick tinted glass in upper portion and 6 mm thick ACP sheet of approved colour etc complete all as specified and directed.

S & F in repair 18 mm thick with min density 650 kg / cum Lead Free PVC ply of single side rigid laminate of approved colour and other side plain white colour fixed with SS screws and solvent cement / adhesive to make cupboard / kitchen cabinet frame or shutter including beading etc complete all as specified and directed.

S& F continuous (Piaano) hinges MS Bright finish width of flap 30 mm when open complete all as specified and directed.

S&F 100 mm long brass handles, cast type, polished bright fixed complete all as specified and directed.

S&F 75 mm long brass handles, cast type, polished bright fixed complete all as specified and directed.

S&F PVC magnet catcher suitable for CB / Cabinet shutter complete all as specified and directed.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work / concrete surfaces and finishing the surfaces even and smooth without using extra cement etc complete all as specified and directed.

M&L for applying bonding agent for bonding old to new concrete surface likes chajja/ beams/ celings/ columns/ facia etc by high performance modified Styrene- Butadiene Rubber (SBR) base binder. Applying of binder is as 10 sqm/ per lit etc complete all as specified and directed.

M&L for single component polymer modified repair mortar upto 30 mm thickness in double coat for repair of RCC members likes beams, columns, chajja and facia/Ceiling, mortar having good compressive strength and shrinkage resistance etc complete all as specified & directed.

M&L for rendering 12 mm thick cement plaster in CM 1:6 on brick work / concrete surfaces of walls & finishing the surfaces even and smooth without using extra cement etc complete all as specified & directed.

Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash to match the existing as required, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for two coats of OBD over a coat of average 2 mm thick wall care putty on newly plastered surfaces complete all as specified and directed.

M & L for two coat of cement base paint over a coat of primer on new plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for Preparing old plastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distemper complete all as specified and directed.

Material and Labour for preparation of old plastered surfaces of ceiling etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of white wash complete all as specified and directed.

Material and Labour for preparation of old plastered surfaces of wall etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply two coat of white wash complete all as specified and directed.

M&L for one coat of cement base paint on old surfaces of wall including preparation of surfaces by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc complete all as specified and directed.

M&L for one coat of apex paint of approved colour on surfaces of pillar/band etc width n exc 0.45 m including preparation of old surfaces by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve and nipple complete all as specified in SSR Part I including dismantling of storage tank.

Dismantling asbestos cement (corrugated, semi corrugated sheet/ North light curve, Ridge etc.) sheets in roof coverings complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L type or J type hooks or cranked bolts etc complete all as specified and directed.

Fixing only 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L type or J type hooks or cranked bolts etc complete but except sheet complete all as specified and directed.

S&F of Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F of Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair Plain, galvanised, mild steel sheeting, 1.00 mm thick in, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with self-tapping screws as specified complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided etc complete all as specified and directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, wind tie, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) quality A complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of brick work etc complete all as specified and directed.

Dismantling Wall / ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and directed.

S&F 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (Perimeter), T section of size 23 mm x35 mm main and 23 mm x 27 mm (intermediate) of 30 gauge suitable for false ceiling including GI wire 6 mm thick @ 1200 mm centre to centre both ways for hanging arrangement complete all as specified and directed.

M&L for 4mm thick non asbestos fibre cement building board designer as in ceiling of size 600 x 600mm fixed to GI snap grid frame work complete all as specified and directed.

Fixing only 4 mm thick non asbestos fibre cement building board designer as in ceiling of size 600 x 600mm fixed to existing GI snap grid frame work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of concrete in any description and in any position (unreinforced) complete all as specified and directed.

M&L plain cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) 25mm thick as in sub floor, sub base, to receive tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles (Premium quality) (square/ rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match the tiles etc complete all as specified and directed.

All as per item No. 96.00 but in skirting over 10 mm thick rendering in 1:4 CM complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300x7mm thick fixed on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry over 10 mm thick 1:4 CM Plaster and pointed in white or coloured cement to match complete all as specified and directed.

Taking up or down 15 mm bore steel tubing including fittings and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down 20 mm bore steel tubing/ PPR pipe including fitting and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

S&F 20 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including brackets ,32 mm CP waste coupling and 32 mm pvc flexible waste pipe 800 mm long & Pillar taps long body cast copper alloy fancy type with capstan heads chromium plated screwed etc complete all as specified and directed.

S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with CI 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding including taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturb portion complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with CI 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern) and making good to disturbed surface of floor all fixed complete all as specified and directed.

Supply only plastic WC seat cover and mild steel chromium plated or aluminised hinging device as etc complete all as specified and directed.

S&F in repairs Flushing Health Faucet for pedestal pattern WC incl .flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long between dia & fixed complete all as specified and directed.

S&F flushing jet for pedestal pattern WC incl. flexible pipe and Brass Chromium Plated nuts and bolts and water pipe of size 1150 mm long between dia & fixed complete all as specified and directed.

S&F in repairs 10litres capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & taking out of old unserviceable connections etc, connecting up new and making good disturb portion complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) etc complete all as specified and directed.

S&F in 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall including clamp complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F 110 mm PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed 200 mm bore, incl bend, shose, Tee, Y, as required, etc in any length with rubber ring joints fixed to walls/Pillar with MS clamp complete all as specified and directed.

S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints laid in floor or in trenches including making good disturb portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints laid in floors or in trenches including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturb portion to match the existing complete all as specified and directed.

S&F clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 100 mm bore pipe complete all as specified and directed.

S&F clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 75 mm bore pipe complete all as specified and directed.

S&F 100 mm Cast Iron Cowl complete all as specified and directed.

S&F 75 mm Cast Iron Cowl complete all as specified and directed.

S&F in repairs 15 mm bore CP stop cock/angle cock, cast copper alloy fancy type, screwed down high pressure, screwed for iron pipe or for unions and fixed complete all as specified and directed.

Supply & fixing in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair bib taps long body cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed.

Supply & fixing in repairs C.P. grating 100/125 mm dia with or without centre hole etc all as reqd at site complete all as specified and directed.

S&F in repairs Pillar taps long body cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia iron pipe complete all as specified and directed.

S&F in repair CI floor trap, plain with grating including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with water proofing liquid @ 200ml in 50 kg cement, including taking out of old unserviceable connections etc, connecting up new and making good disturb portion complete all as specified and directed.

S&F in repairs Vitreous China Urinal, full stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws pointing arounds urinal back in cement, fixing of nozzles for discharge of water flushing pipe and grating and union for discharge pipes etc complete all as specified and directed.

M&L for cleaning of valley gutter of any girth at any height, including properly cleaning off rubbish leaves and other foreign materials laying over it and making it fully functionable to the full satisfaction of Engineer-in-charge.

S&F in repairs CP Soap dish 100 mm dia fixed with cp screws etc complete all as specified and directed.

Shiva Enterprises (BID ID -3369645)

3Krishna Enterprises (BID ID -3369454)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3368191)

N.K. ENTERPRISES (BID ID -3369449)

VARDMAN ENTERPRISES (BID ID -3368364)

M/s SCHOLASTIC ENTERPRISES (BID ID -3368480)

Attar Singh and Sons (BID ID -3369649)