PROVN OF PAVER BLOCK, CHAIN LINK FENCING, SHED FOR MT GARRAGE AND SENTRY POST WITH TOILET, PROVN OF RCC PLATEFORM AND WALL MOUNTED SHELVES WITH SLIDING DOORS AT 4 AFSB VARANASI UNDER GE AF GORAKHPUR.

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings completed all as specified and directed

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using ( 40mm graded stone aggregate ) as in foundations, filling and mass-concrete compete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for RCC M-25 Designe mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, lintel band etc basement slabs, under- reamed piles and mass concrete complete all as specified and directed.

Formwork to flats rough finish surface of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, lintel band and similar work; vertical or to batter complete all as specified and directed.

M&L for RCC M-25 Designe mix using 20 mm graded stone aggregate as in columns complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

M&L for Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed.

M&L for steel work in tubular post/trusses including special shaped washer, hollow section, angle iron, flat iron for fixed independently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attachment and curved shaped by welding making jointless by filling including cutting etc conforming to IS 1161-1979 grade St-240 including work as directed by Engr-in - Charge complete all as specified and directed.

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and appiying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for pre-painted galvatume aluminium zinc coated GI based corrugated, steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roofing covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall and making eaves gutter, fixed with gutter self tapping screws complete all as specified and directed

M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F for PVC (SWR) bends any radius for 110 mm bore provided with access door complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft / soil complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed .

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed

M&L for screed bed 10mm thick in CM (1:6) CM for dado / skirting on brick work finished fair and smooth for receiving tiles in vertical surfaces complete all as specified and directed .

M&L for 25 mm thick cement concrete type B0 (1:2:4) using 12.5 mm stone aggregate as in sub base of floor tile complete all as specified and directed .

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) et complete all as specified and as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 1:6 cement screed 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (joint thickness not to exceed 1mm) complete all as specified and directed .

M&L for vritrified ceramic tiles 10mm thick in light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) Complete all as specified and directed.

S&F in repair Vitreous China wash basin white, flat back, including brackets size 550x400 mm complete all as specified and directed.

S&F in repairs 15 mm bore angle valves, cast copper alloy fancy type chromium plated, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 15 mm bore bib tap,cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.

S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.

S&F in repairs SS CP Grating 150 mm size complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder complete all as specified and directed

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges. Complete all as specified and directed.

S&F in repairs 32 to 40mm dia and 60 to 75 cm long PVC waste pipe with fly nut, coupling for wash basin and urinal complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing specified in SSR Part-II 2020 complete all as specified and directed.

S&F 150mm, aluminium anodised, barrel tower bolts of extruded section and fix complete all as specified and directed.

S&F 150 mm Aluminium handles , cast type, anodised etc.complete all as specified and directed.

S&F PVC (SWR) 'S' or 'P' 125/110 mm, setting and joint with solvent cement. Complete all as specified and directed

Taking down rain water / vent pipe of any description including fittings etc including removal to store, complete all as specified and directed.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal of 110mm dia complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed.

Taking down chowkat or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

Taking down or down steel tubing and connections 15 mm bore complete all as specified and directed.

S&F steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls (concealed) or laid in floors complete all as specified and directed.

M&L for complete removal of existing treatment on wall/roof projections for by scrapping with mechanical sander (having mechanical vaccume mechanism) with sanding pad applying one coat of100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489.2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Comany Depot Tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over a coat of 1mm thick wall care putty . Note:- Primer and emulsion to be carried out through air less spray machine (Mechanical means). Complete all as specified and directed.

M&L Washing rubbing down and stoping of distempered and painted surfaces of wall incuding cornices etc and applying two coat of oil bound distemper white or tinted complete all specified and directed.

M&L for prep of old plastered surfaces & applying 2 coats of white wash as in ceilings complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3-Earthwork) to a distance of 500m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed

Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer n exc 25 cm watering &ramming surplus soil to distance n exc 50 m & making good surfaces in soft and loose soil complete all as specified and directed

M & L cement concrete in foundation filling and mass concrete type C2, 1:3:6 (using 40 mm graded aggregate) complete all as specified and directed

S & F mild steel work like angle iron, flat iron etc in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire etc including all necessary drilling conforming to Fe 290 Gde E-165 complete all as specified and directed

M&L for Brick work with subclass 'B'bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)compete all as specified and directed.

M&L for Rendering 10mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed

M&L for preparing new plastered surfaces of wall and applying two coats of cement based paint (white in colour) over a coat of white cement primer complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

Supply only 4mm dia galvanised steel wire chain link fencing of 100 x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed. Note:- Weight of chain link fencing shall be decided by BOO.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing with RCC fencing post complete all as specified and directed

Surface excavation n.exc 30cm deep & averaging 15 cm deep and getting out in Soft / loose soil complete all as specified and directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 with WPC on top of roof slab finished the surface even and smooth without using extra cement complete all as specified and directed. Note:- (WPC shall be paid and measured seperatoly)

M & L hardcore of broken stone n .exc 15 cm thick of gauge n.exc 63 mm, deposited, sprayed and levelled in layers n exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M & L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

M&L for Sand filling under floor or in foundation including watering & consolidation complete all as specified and directed.

M& L 75mm thick PCC type E-2 , (1:5:10) using 40 mm graded aggregate as in sub base, filling and mass concrete etc all as specified and directed

M&L 40 mm thick, plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in top of floor complete all as specified.

Supply only liquid water proofing compound (ISI) complete all as specified and directed.

M&L preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plaster surfaces of wall and applying two coats of weather coats exterior emulsion Apex paints over a coat of exterior grade water proof wall care putty 1mm thick and a coat of primer complete all as specified and directed.

M&L for preparation of new plaster of wall and applying two coats of oil bound distemper over 1mm thick wall care putty and white cement primer on plaster surfaces complete all as specified.

M&L RCC M-25 Designe mix as in beams, cantilevers , bressummers, lintels over 1.5 m span complete all as specifiedand as directed.

M & L RCC M-25 Designe mix as in slabs supported on walls beam and colums in floors, roofs, landind, deck slabs and shelves and the like.

M&L RCC M-25 Designe mix as in chajjas etc. complete all as specifiedand as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specifiedand as directed.

M&L for Formwork to rough flat finish surface of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifiedand as directed.

S & F 100mm long butt hings medium weight cold rolled mild steel & fixed to chowkats size complete all as specifiedand as directed.

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specifiedand as directed.

Providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specifiedand as directed.

S&F Aluminium alloy anodised sliding door bolt 250mm long with hasp, staple and fixing clip of sheet cast or extruded sections and fixing bolts complete all as specifiedand as directed.

M&L for prepolished Granite 20mm thick of any type work table rubbed and polished in steps ,jambs,pillars,window cills,cooking plateformsand like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specifiedand as directed.

Supply & Fixing 20 mm bore galvanized steel tubing , medium grade with all fittings and fixed to walls , ceilings or laid in floors, trenches complete as per IS 1239 Part-II complete all as specifiedand as directed.

S&F CP helath faucet with 1 meter flexible hose and stand all as specified and as directed by Engr-in-Charge

S&F viterious china wash down water closet pan (pedestal pattern) white (excludinvg fixing bolts, flushing cistern and flush pipe) complete all as specifiedand as directed.

Supply only coloured plastic water closet seat, black closed pattern with flat bottom and cover and mild steel CP or aluminisied hinging device complete all as specifiedand as directed.

S&F Gun- metal,globe or gate valves with iron wheel head,screwed both ends for iron pipes for 20mm bore of pipe complete all as specifiedand as directed.

Supply and fix glass shelf diplomat assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F for Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specifiedand as directed.

M&L 75mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete as specified and directed.

S&F 500 litres capacity rotational moulded polythene water storage tanks (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I complete all as specifiedand as directed.

S&F as in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwedfor iron pipe fixed complete all as specifiedand as directed.

S&F 110mm bore PVC (SWR) Vent cowl fixed to walls complete all as specifiedand as directed.

M&L for E- board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built cement mortar & making good in cement concrete 1:2:4 type B-0/Cement mortar 1:3 complete all as specified and directed with following :- (a) M &L Plugging to wall around the room and supplying & fixing GI powder coated angle of make (Armstrong or equivalent of size 25 X 25 mm X 1.0 mm. (b) S&F 2 mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab placed @ 605 mm centre to centre from perimeter of wall. (c) S&F 25 x 25 x 1.0 mm thick GI tee powder coated as main and cross member at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S&F 4mm thick E-board of approved texure and finished ceiling tiles of size 595 x 595 mm, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be approved by Engr-in-Charge.

Supply and fixing factory made UPVC white colour frame for door,window,ventilator and partition (fixed portion) 40 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/double glazing bead of approproate dimension comprising of UPVC multi chambered frame. ( shape & size according to UPVC profile) , appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy ( white powder coated) touch locks with hook , zinc alloy body with single nylon rollers (weight bearin capacity to be 40 kg) G.I fasteners 100x 8 mm size for fixing frame to finished wall and necessry stainless steel screws etc. Profile frame & sash sall be mitred cut and fusion weled at al corners, including drilling of holes for fixong hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality. complete all as specified and directed by Engineer- in Charge complte all as specified and directed. Note -1. Glazed float glass thickness not less than 5.00 mm rate included in quoted rate and no extra payment will be made separately. 2. UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F casement window and ventilators with net and grill single or multi shutters turn window and made out of upvc multi-cavity frame sections of 60x60x2.5mm suitable reinforced and double multi shutters division are made by using shash mullion having 50x64x2.5mm multi cavity upvc section ,suitable and reinforced and GI and shutters are made out of 50x85x2.5mm upvc section,reinforced and welded in corner with EDPM gasket provision for glass and for air tightat frames and outer side of shutter with single glazed window and adjusting suitable glass bead with perfect hardware like hinges,handles,stays etc complete mosquito mesh shutters is made out of UPVC extuded section of 61x27x2mm with GI channel of 1.20mm thick welded in corner mosquito net of GI is fitted in shutters with proper required accessarry like,hinge MS grill of 12mm round pipe are insertedin main frame and inserted in main frame and screw by hidden screwing system with powder coating etc complete all as specified and directed. Note:Glazed shutters glass thickness not less than 3.00mm and wire mess shutters with SS wire mesh as approved by Engr-in-Charge is also included no payment will be seperately.

S&F for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; frame work ofwater tanks and similar work conforming to Fe.290.Gde-E-165

M/L for coloured, chequered, cement concrete tiles of size 300mm x 300mm x 25mm thick set jointed and pointed in neat cement slurry using grey cement with pigments etc as required over 15 mm thick screed bed of CM (1:6) complete as per manufacturer’s instructions and as directed by the Engr-in-Charge.

M&L PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in bed to 150mm dia drain pipe including packing under and haunching against sides of pipe after they are laid and tested complete all as specifiedand as directed.

S&F salt glazed stoneware drain pipe 150mm dia conforming to IS-651-1972 grade 'A' laid in trenches and jointed in cement mortar 1:1 completed all as specified and direceted.

M&L extra for forming fair finishing to drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds etc, complete all as specified and directed. (Note:- Inner girth only be measured).

M&L for pre-cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cover slabs for man-holes etc set in CM (1:4) complete all as specified and directed. (Note:- Reinforcement sall be measured and paid separately under relevant item of this schedule.)

M&L for rendering 15mm thick in CM 1:6 on faces of brick work or concrete surfaces finished even and smooth without extra cement all as specified and directed complete.

M&L for Cutting into existing manholes for connecting new drains pipe 100mm bore, making good to pipe and rendering, cutting out existing benching for and forming existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified.

S&F 4.00 mm thick sheet glass (Plain/Tinted in colour) in metal frame, ordinary quality n.exc 0.5sqm in each pane. Complete all as specified and directed.

S&F 18 mm thick HDMR (High density high moisture resistance) board of grade 1 quality of one side prelem and other side to suitable for high gloss finish mica of approved quality make :- Century or as approved by GE Fixed with screws, solvent cement/adhesive to make cupboard shutters, sides, top and bottom, shelves inside the cabinet shutter or drawer complete all as specified and directed.

S&F 75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter complete all as specified and directed.

S&F stainless steel handles of 150 mm size for kitchen cabinet shutter/drawer complete all as aspecified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as aspecified and directed.

Material and labour for point wiring of one light / fan/ bell point controlled by one switch. with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed.

All as per item above here in before but for one 3 pin switch socket outlet point 5 Amps on independent board….ditto as above….

All as per item above here in before but for one 3 pin switch socket outlet point 5 Amps on same board with other switch….ditto as above…

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size….ditto as above…

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L for Modular socket outlet 2/3 pin combined 2 module, 6 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.

M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer in charge.

M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S&F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix lamp holder modular type, PVC body complete all as specified and directed.

Supply & Fixing LED lamp Natural white, 12 Watt complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as aspecified and directed.

Supply and fixing in replacement GI Pipe bend to shape 0.75 mtr (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall complete all as specified and directed.

Supply and fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of steel body complete with louvers shutters , 300 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements,connecting/testing and including making hole of suitable size in brick wall including make good the disturbed surface including writing CA NO and MES No. with synthetic enamel paint as color, style and size decided by engineer in charge complete all as specified and as directed.

Supply and fixing ceiling fan 5 star rated , 1200mm sweep , 230 Volts, 50 Hz AC, complete with blades, set of canopy and connecting up including three core PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm wire which shall be passed through PVC flexible conduit, from ceiling rose/connector to fan of length not less than 1.0 meter including writing CA NO and MES No. with synthetic enamel paint as color, style and size decided by engineer in charge complete all as specified and as directed.

Taking down carefully unserviceable DB any type/size disconnecting and making good disturbed surfaces complete all as directed

Taking down carefully unserviceable LED light fitting conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

Supply & fixing MCCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link complete, 16KA ( as required at site )and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.

Supply and fixing factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.

Supply and fixing MCB single pole(SP) 240 volt C curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one complete all as aspecified and directed.

Supply and fixing MCB single pole & neutral(SPN) 240 volt 'C' curve 10 KA 32 Amps complete all as specified and directed incl taking down old one complete all as aspecified and directed.

Supply and fixing MCCB, 415 Volt C curve 16 KA,4 Pole, 100 Amps capacity complete all as specified and directed incl taking down old one complete all as aspecified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB), TPN and current carrying capacity 40 to 100 Amps in the DB complete with connection testing and commissioning.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth lead wire 4.00 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as aspecified and directed.

Taking up the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sqmm 2 core to 25 Sqmm 3.5 core, Including required earth work.

Supply and lay in trenches or passing through pipe XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 25 Sqmm 3.5 core complete all as specified and directed.

Supply and lay in trenches or passing through pipe XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 10Sqmm 2 core complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers of 23 cm thick( 8 Cm before laying the cable and 15 Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Puned down volume shall be measured.

Supply and lay burnt best quality locally available old size sub class 'B' bricks laid in trenches perpendicular to U/G cable for cable protection complete all as specified and as directed.

Boring holes horizontally under road without damaging the surface of road ( minimum 1.0 Metre below the road surface with the help of GI tubing not exc 80 mm bore(dia) for passing UG cable, complete all as specified and as directed. NOTE : - GI Pipe laid will be measured and paid separately under respective item

S&F of 40 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified .

M&L for laying GI tube, 25 mm , medium grade ISI marked with necessary GI fitting such as elbow, union, reducer, tees, bends etc and short length complete laid in trenches/fixed on walls/ laid under floors all as specified and directed by Engr-in-charge.

Supply & fixing gun metal globe gate valve, 25 mm, with iron wheel head screwed both side for GI pipe complete all as specified and directed

Material & Laying for drilling, tapping cast iron water mains (in position) for branch connections of 20/25 mm bore GI Pipe, including saddle pieces and nuts & bolts complete all as specified and directed by EIC.

M&L for straight plain brass ferrules ( or connecting screws) screwed both ends and fixed for 25 mm wire diameter GI tube complete all as specified and directed.

M&L for construction of new valve chamber of size 0.5m x 0.5m x0.5m with brick work comprising the following items complete all as specified and directed.(a) 150 MM thick PCC foundation (1:2:4) type B2 40 MM graded aggregrate.(b) Brick construction with (1:6) cement mortar and rendering 15 mm thick externally and internally complete fair face of brick works surface in cm (1:4) complete all as aspecified and directed.

PANDEY TRADERS (BID ID -3450732)

GAYDIN CONSTRUCTIONS (BID ID -3445199)