PROVN OF LED LIGHTS IN STORE HOUSES AND ADMIN BLDG AT BVY AND LT POWER SUPPLY TO NCS AUDITORIUM AT NAVAL BASE KARWAR

Amount

Taking down carefully existing light fittings of any type, capacity from ceiling of any height & offering credit to contractor complete all as specified & directed. NOTE: Contractor shall take the old tube light fittings complete with all accessories such as ballast, starter, capacitor, tube rod etc as credit.

S & F LED tubelight fitting pendent mounting 36 watt white colour electronic Ballast, starter,white powder coated CRCA sheet steel housing all as specified and directed. MAKE: Havells Cat No.DESTELLOILP36WLED840SPMMAWH or equivalent in Bajaj/CG/Philips

S & F in Integral sleek extruded polycarbonate batten for LED tube light with white acrylic cover suitable for upto 2 x 22 watts LED tube light. MAKE: Havells Cat No.REGALBATTEN8UPTO2X22WDSBSWH or equivalent in Bajaj/CG

S & F in Integral sleek extruded polycarbonate batten for LED tube light with white acrylic cover suitable for upto 1 x 22 watts LED tube light. MAKE: Havells Cat No.REGALBATTEN8UPTO1X22WDSBSWH or equivalent in Bajaj/CG

S & F in repairs LED tube rod 20 Watt, 6500 K, 1200 mm long complete all as specified and directed. MAKE: Havells Cat No.CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent make in Bajaj/Crompton Greaves

S & F LED tubelight fitting surface/pendent mounting 36 watt environment friendly, corrosion resistant, impact proof, surface mounting IP65 luminaire with PC housing & opal finish cover suitable for wet location complete all as directed. MAKE: Havells Cat No.MAGNUMGRANDNEOIP6636WLED840SPC or equivalent make in Bajaj/Crompton Greaves

S & F in LED 45 Watt street light luminaire, pressure die cast housing with toughned glass, IP-66 protection with high power LEDs as light source and electronic driver of 90 W capacity, making necessary connection all as specified and directed. MAKE: Havells cat No.ENDURAPEARLNEOSL45WLED757SASYTOPC or equivalent make in Philips / Havells / C&S

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for laying/taking out cable and getting out in soft/loose soil all as specified and directed.

Returning filling in soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material/soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.

Supply & Laying including jointing, testing and commissioning of 3.5 core 120 Sqmm XLPE insulated, armoured, heavy duty, LT UG electric cable with aluminum conductor 1100 Volt grade including provision of lugs, glands etc laid in trenches or fixed on wall/pole or drawn through GI pipe complete all as specified and directed by Engineer-in-charge. NOTE: Excavation & earth work, sand cushioning and PCC cover for cable protection will be measured & paid for seperately

Supply and lay un-reinforced pre-cast concrete cable cover, class LV, type 1, flat, size 250 x 150 x 40 mm in replacement of existing burnt bricks complete all as directed.

Supply and spread dry river sand in trenches for cable cushioning all as specified in clause 19.75 of SSR Part-I complete as directed by Engr-in-Charge. NOTE: Punned thickness of sand only will be measured & paid.

Supply and lay GI tubing, 'light grade' of size 100 mm ,with all fittings as in cable protection, laid in trenches all as specified and directed by Engineer-in-charge.

S & F in MCB DB TPN 8 way, having degree of protection as IP 43-IK09 with metal door (double door) 415 Volt vertical type complete with 200 Amps rated copper bus bar with neutral link suitable for Four Pole MCCB as incomer and SP MCBs as outgoing and total number of module equals to module for MCCB+24 complete all as specified and directed. MAKE: Indoasian Cat No. 811895 or equivalent as approved by GE. NOTE: MCCB & MCBs will be measured and paid separately.

S & F MCCB 4 pole, 160 Amps, 415 Volts, 3 phase, with ultimate breaking capacity of 25 KA with thermal magnetic release conforming to IEC600947-II part-I/s IS-13947- Part- I with breaking capacity Ics= Icu at 415 Volts of 25 KA, thermal overload setting 80% to 100%, short circuit setting 5 to 10 times, order voltage and shunt release complete all as specified and directed. MAKE: Indoasian Cat No. 830295 or equivalent as approved by GE.

S & F MCCB 4 pole, 160 Amps, 415 Volts, 3 phase, with ultimate breaking capacity of 25 KA with thermal magnetic release conforming to IEC600947-II part-I/s IS-13947- Part- I with breaking capacity Ics= Icu at 415 Volts of 25 KA, thermal overload setting 80% to 100%, short circuit setting 5 to 10 times, order voltage and shunt release including inclosure for 4 pole MCCB complete all as specified and directed. MAKE: Indoasian Cat No 830295 for MCCB and Cat No 811987 for Enclosure or equivalent as approved by GE.

S & F MCB SP, 6 to 32 Amps, 'C' Series, 230 Volts, Single phase, 10 KA Capacity all as specified and directed. MAKE: Indoasian Cat No 811127 or equivalent as approved by GE.

M & L for making necessary connection for existing LT Feeder Panel copper busbar and making suitable connection to MCCB panel by using copper bus bar having minimum current rating of 200 Amps.

BROTECH

H S krishna Electricals

M/S KVG CONSTRUCTIONS

M/S MANOJKUMAR M NAGARKATTE

SIRI SALES AND SERVICES

Raheel Enterprises

ANKIT SHIP REPAIRERS AND SUPPLIERS

Bidder Name

sohan construction

ANKIT SHIP REPAIRERS AND SUPPLIERS

Raheel Enterprises

M/S MANOJKUMAR M NAGARKATTE

M/S KVG CONSTRUCTIONS

SIRI SALES AND SERVICES

BROTECH

H S krishna Electricals