SUPPLY INSTALLATION AND COMMISSIONING OF 1 NOS. AC AND FAN AT TAHSHIL PARISAR SIRATHU IN LEGISLATIVE AREA KAUSHAMBI U.P.

Hi- Wall Split System. Supply And Installation ,Testing and Commissioning of Air Cooled Hi wall split type Air Conditioners complete with indoor unit(IDU) outdoor unit(ODU),surface/concealed copper refrigerant piping with insulation (closed cell Elastomeric, nitrile rubber tubular pipe section ) up to 3 Mtr (IDU To ODU) copper power cable up to 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/R-407 Green Refrigerant wireless remote control ,suitable for working between 180-260V with low & high voltage cutoff and 50HZ ,1 phase AC supply capable of performing cooling ,dehumidification ,air circulation of following capacity with scroll/rotary compressor. The system shall be able to deliver 100% of the rated capacity up to 42 degree Celsius .Min 5 year original equipment manufacturer (OEM) warranty both compressor and printed circuit Board (PCB) , Must comply: Electrical cable IS 694 or IS 9968 temperature sensing control IS/International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617 , heat exchange IS 11329, capacitor IS 2993 and Motor IS 12615, complete as per CPWD specification and IS 1391 Part II 2023. The System Shall be able to operate up to 50 degrees Celsius (outdoor ambient temperature) 2.0 TR with 5-star BEE Rating.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

wiring for circuit/submain wiring along with earth wire with the following sizes of FRL/HFFR/ PVC insulated copper conductor, single core cable in surface /recessed medium class PVC conduit as required. 2x4sq.mm + 1x4 sqmm wire.2x4sq.mm + 1x4 sqmm wire

2x1.5sq.mm + 1x1.5 sqmm wire

S/F of 20mm Medium Class PVC Conduit Along with Accessories in surface /Recess complete.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Stabilizer for 2 Ton AC Working Range: At least 170V-270V.

5% Less C.E.F