Certain B/R repair to MES colony and other areas and Repair Maint of internal wiring alongwith connected accessories in OTM and Md Accn under GE (Utilities) Udhampur.

Amount

Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in-charge.

Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) as on walls, complete all as specified and directed by Engr-in-charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

Rendering 15mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls, complete all as specified and directed by Engr-in-charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work.

Rendering 5mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on ceiling, complete all as specified and directed by Engr-in-charge.

M&L for 1 to 1.2mm thickness of Altek/Birla white putty on plasterd/unplastered surfaces of old wall, complete all as specified and directed by Engr-in-charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and directed by Engr-in-charge.

Preparation of old plastered/unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of anti-fungal acrylic emulsion paint (Appex) any tinted, complete all as specified and directed by Engr-in-charge.

Removing existing paint by scrapping with TruCare Wall Sander L-01/H-01 (having mechanical vacuum mechanism) or equivalent as recommended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour, complete all as specified and directed by Engr-in-charge.

Material and Labour for 02 coats of Oil Bound Distemper over one coat primer incl prepared nely surface of wall using AUTO-ROLLER and AIR-LESS PAINT SPRAYER, complete all as specified and dircted by Engr-in-Charge.

Material and Labour for 02 coats of Oil Bound Distemper over one coat primer incl prepared surface of ceiling using AUTO-ROLLER and AIR-LESS PAINT SPRAYER, complete all as specified and dircted by Engr-in-Charge.

Providing and applying 1mm thick waterproof cement based putty @ 1Kg (undiluted) per Sqm of Asian Paints or its equivalent over the plastered/ old painted wall after scrapping to prepare the surface even and smooth, complete all as specified and directed by Engr-in-charge. Step 1) Mix the putty powered by adding 40-50% water and mix it with Putty mixer (Trucare Putty mixer capacity of min 2.5 kg putty per minute). Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco spray Machine (Model: EH 230 DI) or equivalent as recommended by the manufacturer and approved by the GE, having DC electric motor of 3.3 KW having flow speed of max 6 Itrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" or oy manually. Step 3) Allow 6-8 hrs time to dry the putty surface.

Sanding of the putty surface with Asian Paints TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) or equivalent as reccmmended by the manufacturer and approved by the GE, having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7"/9" to make the surface free from dust etc. by skilled labour, complete all as specified and directed by Engr-in-charge.

Providing and applying, one coat of acrylic waterbased interior/exterior grade primer @ 0.8 itr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent as recommended by the manufacturer and approved by GE, having an electric motor of min 1 HP with a flow speed of min 1 itr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed by Engr-in-charge.

Providing and applying two coats of smooth acrylic emcision with rich matt firish having voc less than 50 grams per Itr complying leed criteria @ 1 Itrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Pairts Trucare Graco or equivalent as recommended by the manufacturer and approved by the GE, having an electric motor of min 1 HP with a flow speed of min 1 Itr per minute having a pressure of 3300 PSI A low 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and directed by Engr-in-charge. Make: "Apex Ultima" of Asian Paint/"Weathercoat All Guard" of Berger Paints/Excel Total of Nerolac Paint

Note: (Applicable to Sri items No. 8 to 12 Here-in-above) At the time of uploading bids each tenderer shall upload a copy of MOU towards triparty agreement between tenderer. Manufacturer of Paints from Asian Paints/Berger Paints/Goodlass Nerolac Paints and their Applicators, for materia and execution of work from any of the said manufacturers. Financial Bids of only those bidders shall be admitted whosoever shall upload a legitimate MOU. 2. Terms of the MOU so entered between tenderes, Applicators and Manufacturers mentioned above shall also cover the gaurantee from manufacturer of paints for any defec: in work executed by their applicator for a period of 3 Years. All other aspects with regard to payment, execution of work or other legal points shall be solely as decided between the tenderer, Paint manufacturer & Applicator. Department shall in no way be responsible for any complicacy arising at a later stage between the parties to MOU with regard to payments or execution of work. 3. (Applicable to Srl items other than covered under Note 1 to 5 here-in-before). The necessary steel scaffolding upto G+3 storeyed wherever required to execute the work shall be provided by the contractor with all safety equipments and the cost of providing scaffolding & safety equipments shall be deemed to be included in the quoted rates of the contractor and nothing extra shall be admissible on this account. 4. The work shall be executed in restricted area and head loss etc. The contractors are advised to consider this aspect while quoting his rates. Nothing whatsoever on this account shall be admissib e at later stage.

Removal of existing old water proofing treatment as in roofs and Preparing RCC roof slab top by wire brushing and cleaning the dust and foreign materail etc , there after applying 15mm thick cement plaster on concrete surface in CM 1:4 finished even and smooth without using extra cement using water proofing compound, complete all as specified and directed by Engr-in-Charge.

Material and labour for water proofing treatment to non-accessible roof slabs by applying a coat of approved oil based bituminous primer (conforming to IS-3384) @ 0.3 ltr per sqm on finished concrete surface of roof and laying 3mm thick APP PL/MT membrane, weight not less than 3 kg/sqm and reinforced with with non-woven polyster reinforced, laid (starting at lowest point in slope roof) by using a LPG torch to fuse plastic membrane on bottom face of membrane and applying uniform pressure with a roller/wet cloth to ensure to remove entrapped air, if any, with overlap joints of 100mm in longitudinal direction and 150mm in tranverse direction complete incl finally applying two coats approved aluminium paint over membrane, complete all as specified and directed by Engr-in-charge. Make : Tikidan/Texsa India Ltd/M/s STP limited

Supply only integral water proofing compound as per latest IS specification, complete all as specified and directed by Engr-in-charge.

Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-charge.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for surface channel and drain, complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4, type B-1, using 20mm graded crushed aggregate as in surface channels and drains, complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engr-in-charge.

Precast reinforced cement concrete, (Nominal mix), Type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles with plain face, set and jointed in cement mortar 1:4, complete all as specified and directed by Engr-in-charge. Note : Reinforcement shall be measured and paid separately)

Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

Description all as per ser item No 25.00 here-in-before but except bricks, complete all as specified and directed by Engr-in-charge. Note : Old bricks obtained against demolition shall be used.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius with old size brick thick walls built in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.

Walling of random rubble stone masonry uncoursed with best quality lacally available harder stones such as granite, trap, basalt stone etc, wellbonded bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

Description all as per ser item No 28.00 here-in-before but except stones, complete all as specified and directed by Engr-in-charge. Note : Old stones obtained against demolition shall be used.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-charge.

Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde-E-250) quality-A, steel work, complete all as specified and directed by Engr-in-charge.

M&L for Welded steel wire fabric supplied and fixed to wood or steel members weight not exc. 4 kg per square metre, complete all as specified and directed by Engr-in-charge.

M&L for 100 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in path etc finished even and smooth w/o using extra cement, complete all as specified and directed by Engr-in-charge.

M & L for 50mm thick Plain Cement Concrete 1:3:6, type C-2 (using 20mm graded crushed stone aggregate), finished even and smooth without using extra cement as in plinth protrection, complete all as specified and directed by Engr-in-charge.

Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed by Engr-in-charge.

M&L for brushing neat cement slurry with 3.00kg of cement per sq.metre, complete all as specified and directed by Engr-in-Charge.

Chequered cement concrete coloured tiles 30cmx30cmx25mm thick glossy finish set over & including 20 mm thick screed in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles, complete all as specified and directed by Engr-in-charge.

M & L for Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/boulders, complete all as specified and directed by Engr-in-charge.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base, complete all as specified and directed by Engr-in-charge.

M&L for Machine pressed precast concrete interlocking paver blocks any shape and size confirming to IS15658-2006 of 60 mm thick (M-35Grade) with grey cement and no pigment, complete all as specified and directed by Engr-in-charge.

M&L Fine sand filling under floor in layers not exceeding 25cm each layer including watering and well ramming, complete all as specified and directed by Engr-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed by Engr-in-charge.

M&L for 100mm thick PCC 1:5:10 type E2 (using 20mm graded stone aggregate) as in sub base of path/hardstanding, complete all as specified and directed by Engr-in-charge.

TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engr-in-charge.

TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia,complete all as specified and directed by Engr-in-charge.

M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3metre in length. Joint gap between adjoining slab, at corners and at junctions of walls shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls. Complete all as specified and directed by Engineer-In-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-charge.

M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed by Engr-in-charge

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm but not exceeding 4 Sqm each, and removing from site, complete all as specified and directed by Engr-in-charge

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed by Engr-in-charge.

Taking down steel windows including frames and shutters not exceeding 1.50 sqm each and removing to store, complete all as specified and directed by Engr-in-charge.

Taking down steel windows including frames and shutters exceeding 1.50 sqm but not exceeding 4 sqm each and removing to store, complete all as specified and directed by Engr-in-charge.

S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc, complete all as specified and directed by Engr-in-charge.

S&F factory made flush shutters, 35mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side incl 40X 6mm thick 2nd class HW lipping on edge, complete all as specified and directed by Engineer-In-Charge.

S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc, complete all as specified and directed by Engr-in-charge.

Factory made solid PVC moulded door shutter ( with particle board core) of 30mm thick with 2 raised panel design with 2mm thick moulded PVC sheet on back face & 2mm coloured prelaminated PVC sheet on front face as specified in SSR Part II 2010 Sec 8 clause 8 B 1 to 8B 2.1, complete all as specified and directed by Engr-in-charge.

Suply and Fixing steel window (Powder coated) as per IS 13871: 1993 of folloing specification of powder coating material : (a) Grade 'A' (Glossy finish). ( b) Dry film thickness of 50 -60 microns. (c) Protection against humidity - No blistering, rusting and loss of adhesion. (d) Resistance to heat, detergents and acid/alkali- No appreciable change of colour. Colour of powder coating as per user direction, 1.25mm thick Box type ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting to Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one verticale mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window ) including following fitting welded to frame shutter : (a) Handle of Z Sec 20mm x 100mm long (b) Stopper 01 No per leaf (c) Cleat 55mm long of hollow suare 15mm x 20mm x 63mm welded to hinges 01 No per leaf (d) Mild steel pintle hinges of size 75mm x 75mm x 12mm - 02 Nos per leaf (e) Grills made out of MS Suare bar 12mm dia welded to FI frame complete all as specified and directed by Engr in Charge . Note : (i) Glass shall be measured and paid seprately under appropriate item (ii) Irrespective of whatever directed by Engr in Charge , grill shall be of 12mm dia MS square bar and paid seperetely, complete all as specified and directed by Engr-in-charge.

Suply and Fixing steel window (Powder coated) as per IS 13871: 1993 of folloing specification of powder coating material : (a) Grade 'A' (Glossy finish). ( b) Dry film thickness of 50 -60 microns. (c) Protection against humidity - No blistering, rusting and loss of adhesion. (d) Resistance to heat, detergents and acid/alkali- No appreciable change of colour. Colour of powder coating as per user direction, 1.25mm thick Box type ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting to Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one verticale mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window ) including following fitting welded to frame shutter (a) MIld Steel Hold Fast 150 mm long of 12mm Square bar made to shape - 04 Nos per windiw. (b) Handle of Z Sec 20mm x 100mm long (c) Stopper 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges 01 No per leaf (e) Mild steel pintle hinges of size 75mm x 75mm x 12mm - 02 Nos per leaf (e) Mild Steel pintle hinges of size 75mm x 75mm x12mm 02 Nos per leaf . Note : (i) Wire Mess shall be measured and paid seprately under appropriate item, complete all as specified and directed by Engr-in-charge.

Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004), complete all as specified and directed by Engr-in-charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004), complete all as specified and directed by Engr-in-charge. Make: Rajshri or equivalent as approved.

Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engr-in-Charge.

Supply and fix powder coated anodised aluminium alloy sections 3 tier track sliding windows Series B (Jindal aluminium window section cataloque) weight of section frame 1.248 kg/m and shutter section weight 0.547 kg/m duly fitted with neoprene beading, glazing clips, tinted glass panes 4.80/5.0 mm nominal thickness, aluminium expanded mosquito proof wire cloth 0.45 mm thick and average width of aperture 1.4 mm, aluminium alloy handles etc including taking down old window in any size and make, complete all as specified and directed by Engr-in-charge. Note : Rate shall include all glazing/aluminium expanded wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

Supply and fix powder coated anodised aluminium ventilator with fixed aluminium frame of size 65 x 40 x 1.98 mm thick or equivalent section fixed in vertical position with aluminium vertical members and half portion to be provided with 4 mm thick pinhead glass and remaining portion to be louvered using 4 mm thick pinhead glass and louvered portion covered with aluminium expanded mosquito proof wire cloth 0.45 mm dia and average width of aperture 1.4 mm incl necessary frame work, including rubber gasket and aluminium beading including taking down old ventilator in any size and make, complete all as specified and directed by Engr-in-charge. Note : Rates shall include all glazing/aluminium expanded wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading etc

S&F aluminum handles cast type, anodised, 150 mm size, complete all as specified and directed by Engr-in-charge.

S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required, complete all as specified and directed by Engr-in-charge.

S&F of 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt, complete all as specified and directed by Engr-in-charge.

S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-charge.

S&F mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required, complete all as specified and directed by Engr-in-charge.

Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engr-in-charge.

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed by Engr-in-charge.

Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engr-in-charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast, complete all as specified and directed by Engr-in-charge.

S&F of stainless steel wire clothcut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple in repairs, complete all as specified and directed by Engr-in-charge.

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge.

Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engr-in-charge.

S&F 4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engr-in-charge.

Mild steel PVC powder coated (coloured) curtain rod with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs, complete all as specified and directed by Engr-in-charge.

M&L18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in shelves, shutters etc ,including hinges, hasp staple, complete all as specified and as directed.

Providing and applying Polymer modified cement mortar of average thickness 15-20mm using Polymer in one or more layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacturer’s specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc and by finishing the surface with 12mm thick (1:3) Cement sand plaster. Make :- SIKA - Sika 122 WL FOSROCK - Renderoc S2

Providing and applying Polymer modified cement mortar of average thickness 30-40mm using Polymer in two layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacturer’s specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc and by finishing the surface with 12mm thick (1:3) Cement sand plaster. Make :- SIKA - Sika 122 HS , FOSROCK - Renderoc HS xtra

Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

Description all as per ser item No 83.00 here-in-before but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr-in-charge.

S & F for Vitrified Double charged coloured premium quality tile 10mm thick light shade (square / rectangular) polished, area of each tile not exceeding 0.36 sqm over and including 15mm thick screed bed in Cement Mortar 1:6 in floors/wall as skirting ) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

Material and labour for 18-20mm thick Mirror polished, high gloss finish Granite (absolute Jet/telephonic Black) work in jambs/soffits, window-cills, basin/kitchen platforms, kitchen shelves, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl necessary making holes for fixing hinges, bolts, requisite adhesives/epoxy for pasting, etc complete including 15mm thick screed bed in Cement Mortar 1:4 in floors etc, complete all as specified and directed by Engr-in-charge.

Providing edge moulding to 18-20mm thick granite/kota stone slab including machine polishing to edge to give high gloss finish etc, complete all as specified and directed by Engr-in-charge.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick plaster in CM (1:4) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish, complete all as specified and as directed by Engr-in-Charge

M & L for kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish, complete all as specified and as directed by Engr-in-Charge.

Glazed ceramic coloured tiles digital exc 0.08 sqm and n xec 0.16 sqm,7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge.Glazed ceramic coloured tiles exceeding .075 sqm but not exceeding 0.15sqm as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge.

M&L for joint free non skid ceramic colour tiles 7 to 8mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry in floor and pointed in colour cement to match the shade over and including sceed bed or bedding layer of mortar 15 mm thick 1:6. Note :- Design, shade and pattern of fixing of tiles shall be as directed by Engineer-In-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over and including 10mm thick cement plaster in CM 1:3, set and jointed in neat cement slurry and pointed in white or colour cement to match . Complete all as specified and directed by Engineer-in-charge. Note:- Design, shade and pattern of fixing of tiles, complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm , complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 20mm , complete all as specified and directed by Engr-in-charge.

M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm, complete all as specified and directed by Engr-in-charge.

Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed by Engr-in-charge.

M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm, complete all as specified and directed by Engr-in-charge.

Fixing only Steel water tubing 20mm dia medium grade galvanised with all fitting and fixed, complete all as specified and directed by Engr-in-charge.

S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed by Engr-in-charge.

S&F in repairs Rotational moulded polyethylene water storage tank 1000 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed by Engr-in-charge.

Supply and fixing in repair ball valves of size 20 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site, complete all as specified and directed by Engr-in-Charge

Supply and fixing in repair angle valves cast copper alloy 15 mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site, complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia stop cock fancy type chromium plated, complete all as specified and directed by Engr-in-charge.

Supply and fix concealed type brass chromium plated Bib taps (suitable size for 20mm outer dia CPVC pipe), with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete incl fixed in repair, complete all as specified and directed by Engr-in-charge. Make : Prayag Cat No. 7206 or equivalent

S&F bib cock 15mm bore fancy type long body chromium plated in repair, complete all as specified and directed by Engr-in-charge.

S & F in repair 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engr-in-charge.

Description all as per ser item No 106.00 here in before but dia 15mm complete.

S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as specified and directed by Engr-in-charge.

PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, (fixed in repair), complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous China wash basin, white, flat back, size 450x300mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair, complete all as specified and directed by Engr-in-charge. Make- Cera Cat Part No- S2040160

S&F Vitreous china Counter top wash hand basin Cat part: KUS-WHT-35601 (Size: 505 x 435 x 175 mm) including chromium plated brass waste coupling and waste pipe all as specifed and directed. Make: Jaquar (Kubix Series)

Supply and fix 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end, complete all as specified and directed by Engr-in-charge.

S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, laid in trenches or in floor inluding taking down existing old pipes, complete all as specified and directed by Engr-in-charge.

Description all as per ser item No 113.00 here in before but bore of pipe 75mm.

S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes, complete all as specified and directed by Engr-in-charge.

S & F 75mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes, complete all as specified and directed by Engr-in-charge.

S&F for 110mm PVC (SWR) bends any radius, complete all as specified and directed by Engr-in-charge.

S&F for 75mm PVC (SWR) bends any radius, complete all as specified and directed by Engr-in-charge.

S&F for 75mm dia outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in-charge.

S & F in repair 15mm dia pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-charge.

S & F 32 mm dia waste coupling of PTMT (half or full threaded) (minimum weigh 45 gms), complete all as specified and directed by Engr-in-charge.

S & F in repairs water closet vitreous china squatting pan, Orissa pattern size 580 x 440mm white with integral foot rests including provision of lime concrete bedding with `P' trap and connection to drain and to flushing pipe anti syphonage pipe (excluding flushing cistern), complete all as specified and directed by Engr-in-charge.

S & F in repair for Vitreous china water closet pedestal pattern, white including connection to drain (or outgoing pipe) and to flushing pipe antisyphonage pipe and plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including jet pressure, complete all as specified and directed by Engr-in-charge.

Supply and fix concealed type brass chromium plated angular stop cock with flange (suitable size for 20mm outer dia CPVC pipe), complete all as specified and directed by Engr-in-charge. Make : Prayag Cat No. 7210 or equivalent

Supply and fix concealed type brass chromium plated 2-way angular stop cock with flange (suitable size for 20mm outer dia CPVC pipe), complete incl taking down old stop cock, complete all as specified and directed by Engr-in-charge.. Make : Prayag Cat No. 7211 or equivalent

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 20mm outer dia CPVC pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed by Engr-in-charge.

Supply and fix Brass CP Wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed and joint with adhesive, taflon tape, etc complete incl taking out old CP Bib cock tap, complete all as specified and directed by Engr-in-charge. Make: Prayag, Jaquar, Cera or equivalent

Supply and fix Brass CP Central hole basin Mixer for mixing hot & Cold water screwed down for iron pipe and fixed and joint with adhesive, taflon tape, etc complete incl taking out old CP Bib tap, complete all as specified and directed by Engr-in-charge. Make: Prayag Cat No. 7250 or equivalent

Supply and fix Brass CP Sink Mixer with movable neck, fixed to wall, for mixing hot & Cold water screwed down for iron pipe and fixed and joint with adhesive, taflon tape, etc complete incl taking out old CP Pillar tap, complete all as specified and directed by Engr-in-charge. Make: Prayag Cat No. 7255 or equivalent

S&F 4mm thick superior quality shelves (corner), made of transparent acrylic sheet, set of three, size 30x30cm, 25x25cm, 20x20cm, complete all as specified and directed by Engineer-In-Charge.

S&F in repairs stainless steel toilet paper holder with gutties and steel screws on walls, complete all as specified and directed by Engineer-In-Charge.

S&F stainless steel soap dish, complete all as specified and directed by Engineer-In-Charge.

Cutting/clearing of small plants, bushes, wild vegetation growth and removal of rubbish and other materials upto a distance exc. 50mtr but n. exc 100mtr, complete allas specified and directed by Engineer-In-Charge.

Surface dressing n.exc 15cm deep in any type of soil above or bellow ground level, complete all as specified and directed by Engr in Charge.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engineer-In-Charge. Make- National/ Neelkanth or comet international

Supply and fix 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed by Engr-in-charge.

Supply and fix 25mm thick solid PVC composite sheet, prelaminated (Sunmica) on front side and plain matching dark shade laminated background as in Cubboard flush shutters, fixed with and incl SS flush screws incl necessary cutting for reqd shape, rebate, hinges, hooks, etc and fixing only of self closing hinges, wall hanging hooks, magnetic locks, handles, etc incl taking down, complete all as specified and directed by Engr-in-charge. Note :- Necessary Hinges, hooks, handles and locks shall be measured and paid separately as supply only.

Supply and fix 18/19mm thick solid PVC composite sheet, prelaminated (Sunmica)on front side and plain matching dark shade laminated background as in kitchen cabinet shutters, backing, sides, top/bottom, etc, fixed with and incl SS flush screws incl necessary cutting for reqd shape, rebate, hinges, hooks, etc and fixing only of self closing hinges, wall hanging hooks, magnetic locks, handles, etc incl taking down, complete all as specified and directed by Engr-in-charge. Note :- Necessary Hinges, hooks, handles and locks shall be measured and paid separately as supply only.

Supply only heavy duty Slim Nickel plated Stainless steel magnetic catch (L shape) with strong earth magnet, size 11mm x 35mm x 4mm, complete all as specified and directed by Engr-in-charge.

Supply only heavy duty stainless steel slip on hinges, self closing type with opening full overlay or 105°, suitable for 25mm thick shutter of maximum size 850mm x 550mm, complete all as specified and directed by Engr-in-charge.

Supply only Ergonomically designed powder coated Aluminium anodised handle, finger pull type, suitable for 19mm thick shutter, size 14mm x 43mm complete incl finish as approved, complete all as specified and directed by Engr-in-charge.

E/M PORTION:- Taking down carefully alu./copper point wiring ,light fan socket, or power complete with fittings such as switches ceiling rose;holders; regulators, socket etc removing material to store for keeping in safe custody for reuse or disposal by credit and marking good to disturbed surfaces of walls floors etc, complete all as specified and directed by Engr in Charge.

M & L for concealed point wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC concealed conduit for fixing of switches, sockets,light, fan regulators etc for the following , complete all as specified and directed by Engr in Charge.

One light/fan/bell point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One socket outlet 5 Pin, 5 Amps, SP on same board.

One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size .

One light point point controlled by two 2-way switches with cables 1.5 sqmm size.

M & L for wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables in PVC casing caping of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm for fixing of switches, sockets,light, fan regulators etc for the following, complete all as specified and directed by Engr in Charge.

One light/fan/ /bell point or one fan point controlled by one switch

One 3/5 pin socket outlet, 5 Amp independent

One socket outlet 5 Pin, 5 Amps, SP on same board.

One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size .

S&F Piano type switch one way 6 Amps , 240 Volt, ISI marked , complete all as specified and directed by Engr in Charge.

S&F Bell push,flush type, one way 6 Amps , 240 Volt ,ISI marked , complete all as specified and directed by Engr in Charge.

S&F Switch Piano type single pole 15Amps one way 240 Volt, ISI marked, complete all as specified and directed by Engr in Charge.

S&F Switch 6 amp, 2 way, 240 Volt ,ISI marked, complete all as specified and directed by Engr in Charge.

M & L for modular white cover plate with frame 8 module , complete all as specified and directed by Engr in Charge.

M & L for modular white cover plate with frame 6 module , complete all as specified and directed by Engr in Charge.

M & L for modular white cover plate with frame 4 module , complete all as specified and directed by Engr in Charge.

M & L for modular white cover plate with frame 3 module , complete all as specified and directed by Engr in Charge.

M & L for modular white cover plate with frame 2 module, complete all as specified and directed by Engr in Charge.

M & L for modular white cover plate with frame 1 module , complete all as specified and directed by Engr in Charge.

S&F Modular switch one way 6 A,1 module 240 Volt, ISI marked , complete all as specified and directed by Engr in Charge.

S&F Modular Bell push,one way 6 A, 1 module, 240 Volt ,ISI marked, complete all as specified and directed by Engr in Charge.

S&F modular Switch single pole 16A one way, 1 module 240 Volt, ISI marked, complete all as specified and directed by Engr in Charge.

S&F modular Switch 10 amp, 2 way, 1 module, 240 Volt ,ISI marked , complete all as specified and directed by Engr in Charge.

S&F modular socket 3 pin 6Amp 2 module ISI marked , complete all as specified and directed by Engr in Charge.

S&F modular socket out let 6 /16 Amps 3 pin, 2 module , complete all as specified and directed by Engr in Charge.

S&F of Modular electronic step type regulator of capacity 240 volts 2 module ISI marked, complete all as specified and directed by Engr in Charge.

S&F socket out let 6 /16 Amps 6 pin flush type, complete all as specified and directed by Engr in Charge.

S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked , complete all as specified and directed by Engr in Charge.

S&F Lamp holde PVC type with back plate suitable for batten fittings, complete all as specified and directed by Engr in Charge.

S&F of electronic step type regulator of capacity 240 volts flush type ISI marked , complete all as specified and directed by Engr in Charge.

S& F Bell, AC, 230 volts, single pole, complete all as specified and directed by Engr in Charge.

S&F in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed by Engr in Charge.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size , complete all as specified and directed by Engr in Charge.

S&F in replacement LED light fitting 7/9/10 W Bulk head luminaires complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings , complete all as specified and directed by Engr in Charge.

S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 4.0Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly , complete all as specified and directed by Engr in Charge.

S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly , complete all as specified and directed by Engr in Charge.

M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1).

S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces, complete all as specified and directed by Engr in Charge.

S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces, complete all as specified and directed by Engr in Charge.

S&F Sheet metal enclosure factory made for DBs Triple pole and neutral single door 415 volts 4 way ,suitable for MCCBs and fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces, complete all as specified and directed by Engr in Charge.

S&F MCB single pole and neutral, 240 Volts , 50 Hz 10 Ka, 40 to Amps, 30mA, complete all as specified and directed by Engr in Charge.

S&F MCB single pole 240 Volts , 6 to 20 Amps all as specified and as directed, complete all as specified and directed by Engr in Charge.

Taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm complete all as directed by Engr-in-Charge.

Description all as per ser item No 181.00 here in before but for exhaust of any size/make, complete all as specified and directed by Engr in Charge.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 2 core in service connections, complete all as specified and directed by Engr in Charge.

Description all as per ser item No 183.00 here-in-before but for 10 sqmm 2 core

Description all as per ser item No 183.00 here-in-before but for 16 sqmm 2 core

S& F in repair MCCBs 415 Volt 16 KA, 4 pole 63 Amp, complete all as specified and directed by Engr in Charge.

S& F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core, complete all as specified and directed by Engr in Charge.

S& F in repair PVC Rectangular block for switches,socket, fan regulator, 3 mm thick plastic laminated sheet cover of size 100mm x 100 mm and 50 mm deep, complete all as specified and directed by Engr in Charge.

Checking,servicing, oiling and greasing of fan of any size/type by using appropriate grade of oil /grease and replacing defective parts such as bush, bearing, split pin, rubber bush, hanging clamp and capacitor etc including cleaning, complete all as specified and as directed by Engineer- in -Charge (Note|-Parts/components will be measured and paid seperately under their respective items)

Rewinding of celling fan 1200/1400mm sweep, AC, 230 volts single phase with super enamelled copper winding wire of appropriate size including packing, insulating material, soldering, varnishing, reassembling and testing as required, making functional, complete all as specified and directed by Engr in Charge.

Nuts, bolts and washers of appropriate size for hanging of celling fan, complete all as specified and as directed by Engr-in-Charge

Top / botton canopy of required size with tightening screws, complete all as specified and as directed.by Engr-in-Charge

Bearing of celling fans for 1200/1400mm sweep suitable for different makes /type of fans, complete all as specified and directed by Engr in Charge.

Ball bearing suitable for exhaust fan 300mm to 600 mm sweep of different make, complete all as specified and directed by Engr in Charge.

Split pins of galvanished iron 1/8" dia, 2" length , complete all as specified and directed by Engr in Charge.

Rewinding of exhaust fan 300mm sweep AC 230 volts single phase with super enameled copper wire of appropriate size including packing insulating material, soldering, varnishing , reassembling , testing and making functional, complete all as specified and directed by Engr in Charge.

Description all as per ser item No 196.00 here-in-before but for 450 mm to 600 mm sweep

Condenser/capacitor suitable for 230 volts singls phase celling fan 1200mm/1400 sweep of approved make and quilty of capacity 2.5 MFD, complete all as specified and directed by Engr in Charge.

Description all as per ser item No 198.00 here-in-before but for 3.15 MFD.

Description all as per ser item No 198.00 here-in-before but 4 MFD for Exhaust Fan

Description all as per ser item No 198.00 here-in-beforebut 6 MFD for Exhaust Fan

Supply and fixing Acrylic sheet molded letters ( GARRISON ENGINEER (UTILITIES) ) of size 1' x 1' white in colour with good quality LED strip light including constant current electronic driver and making connnection with suitable size copper conductor multistranded FRLS wire, complete all as specified and directed by Engr in Charge.

S&F wireless,waterproof door bell for office at over 120 meter range operating , complete all as specified and directed by Engr in Charge.

S&F LED Lamp 9 Watt suitable for lamp holder , complete all as specified and directed by Engr in Charge.

S&F in repair and replacement of strip light 5 meter long warm white, suitable for ceiling, complete all as specified and directed by Engr in Charge.

S&F in repair slim surface mounted 12 watt LED panel with premium diffuser to ensure glare free & even light distribution , complete all as specified and directed by Engr in Charge.

SODHI TRADING CORPORATION (BID ID -3487888)

RAMAN CONSTRUCTION CO (BID ID -3488017)