DAY TO DAY MAINT OF B/R NATURE AT OMQ ENCLAVE, DAY TO DAY MAINT RELATED TO INTERNAL ELECTRICAL COMPLAINTS IN RS/TIPNIS/10 AFH AREA AND REPAIR/MAINT OF WALLS INCLUDING REPLACEMENT OF CONCERTINA COIL AND FENCING REPAIRS AT SMQS AREA AND REPAIR/MAINT

Amount

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling in concealed position including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F GI galvanised steel water tubing and connection medium grade 15mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed..

S&F GI galvanised steel water tubing and connection, medium grade, 15mm bore with all fitting fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed.

Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F GI galvanised steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, with capstan head, screwed down, screwed for iron pipe, compelete all as specified and directed.

S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair 15mm bore, stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore, stop valve, fancy type, chromium plated, with long shank and cup, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore angular stop valve, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm bore pipe, with 1.25 metre long flexible tube and ABS wall hook including makeing connection and fixed in position, complete all as specified and directed.

S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges, compelete all as specified and directed.

S&F in repair, CP toilet paper holder, with cover white, box type, white with CP screws, complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (Minimum wight - 210 gms), complete all as specified and directed.

S&F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (Minimum wight - 142 gms), complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank, complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) (Minimum weight -45 gms) for 32mm bore discharge pipe, complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full threaded) (Minimum weight -60 gms) for 40mm bore discharge pipe, complete all as specified and directed.

S&F 140mm size grating round of PTMT (Minimum weight -50 gms), complete all as specified and as directed.

S&F in repair shower rose 125mm size, brass, chromium plated, including fixing to steel pipe or union, complete all as specified and directed.

S & F in repair 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

S & F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed.

S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.

S&F in repair internal assembly including valve less syphone for 10 ltrs capacity PVC flushing cistern , complete all as specified and directed.

S&F in repair handle for 10 ltrs capacity PVC flushing cistern, complete all as specified and directed.

S&F in repair inlet ball valve for 10 ltrs capacity PVC flushing cistern, complete all as specified and directed.

S&F in repair float for 10 ltrs capacity PVC flushing cistern, complete all as specified and directed.

S&F in repair of 32mm size PVC solid waste pipe for wash hand basin and sink 800mm long, complete all as specified and directed.

S&F in repair of 40mm size PVC solid waste pipe for wash hand basin and sink 800mm long, complete all as specified and directed.

S&F in repairs 20mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repair vitreous china squatting pan,"Orissa pattern" white, size 580x 440 mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti -syphonage pipe, complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550x 400mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed.

S&F in repair sinks made of stainless steel with draining board 1mm thick with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx410mm bowl size 410mmx330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed.

S&F stainless steel plate rack of size 0.75 x 0.78m standard quality weight not less than 6 kg, fixed with brass screw, complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S &F corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 25 cm side with chromium plate bracket guard, complete all as specified and directed.

S&F in repair central hole basin mixer, chromium plated, fancy type, complete all as specified and directed.

S&F in repair 3-in-1 wall mixer, chromium plated, fancy type, complete all as specified and directed.

S&F in repair of swan neck sink mixer, chromium plated, regular spout T/M (swing spout), fancy type, complete all as specified and directed.

S & F in repair soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.

S & F in repair 15mm bore pillar taps, of PTMT any colour high pressure, screwed for iron pipe and fixed (minimum weight - 110 gms), complete all as specified and directed.

S & F in repair 15mm bore stop valves, standard, of PTMT any colour, high pressure, screwed for iron pipe and fixed (minimum weight - 90 Grams), complete all as specified and directed.

S & F in repair 15mm bore, angle stop valves of PTMT any colour high pressure, screwed for iron pipes and fixed (minimum weight - 90 Grams), complete all as specified and directed.

S&F in repair 15mm bore long body, bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight - 90gms), complete all as specified and directed

S&F chromium plated peg set of 5, fixed to wall or doors, complete all as specified and directed.

S&F 1st class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to store, complete all as specified and directed.

S&F in repair 2nd class hardwood plain fillets, square, ractangular or triangular in section, area exc. 3 Sqcm & n.exc. 6 Sqcm, clean sawn, secured with nails or brads, complete all as specified and directed.

S&F in repair 2nd class hardwood plain fillets, square, ractangular or triangular in section, area exc. 13 Sqcm & n.exc. 25 Sqcm, clean sawn, secured with nails or brads, complete all as specified and directed.

S&F in repair 2nd class hard wood boarding, 15mm thick, clean sawn, with butt joints, fixed with nails in any situaion as shelves of built-in-cupboard including replacing old and or decayed boarding in patches, including cutting out old, piecing, heading joints, etc., complete all as specified and directed.

S&F in repair for 25mm thick wooden grain PVC celuka ply fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work fixed with screws/self tapping screws etc, complete all as specified and directed

S&F in repair for 18mm thick wooden grain PVC celuka ply fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work fixed with screws/self tapping screws etc, complete all as specified and directed.

S&F in repair 100mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 200mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair 75mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed.

S & F in repair continuous (piano) hinges,mild steel, width of flap 30mm (when open) bright finish or electrogalvanised, complete all as specified and directed.

S&F in repair 150mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed.

S&F in repair 100mm long extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed.

S&F in repair mild steel handles for MS windows/vents 75mm long suitable for left/right hand including fixing nut & bolts, complete all as specified and directed .

S&F in repair mild steel casement stays, size 300mm, with hinged joint and two plates, with studs suitable for MS windows and vents, complete all as specified and directed .

S&F in repair 75mm hasp & staple, safety type, aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repair 25mm dia curtain rod of anodised aluminium alloy with fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (die cast) body designation No 1, universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 Kg, complete all as specified and directed.

S & F in repair 2mm thick ruberised door seal, width exc 30mm but n.exc 50mm, fixed with screw, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

M&L for sheet glass, 3mm thick, ordinary quality and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

All as per item No. 81.00 here-in-before but frosted, on one side, complete all as specified and directed.

M&L for sheet glass, 5.5mm thick, ordinary quality and glazing with oil putty or wooden beads in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.

Repair to concealed stopcock, angle stop cock, bib tap etc with required brass spindle, as required, and other necessary arrangement/spare parts, compelete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.h

Resecuring or easing and adjusting without taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each, complete all as specified and directed.

M & L for plastering in patches (n. exc. 1 Sqm) to wall, ceiling and applying surface finishes etc, complete all as specified and directed. Note : Quoted rate shall deemed to be included taking down cement plaster, applying adjacent finishes, removel of debris and cleaning the area.

Taking down, repair to aluminium doors, windows, of size exc. 1 Sqm but not exc. 2 Sqm etc by replacing its faulty parts i.e. rollers, hinzes, handles, lock to bring its functional conditions and refixing in the same position, complete all as specified and directed. (Note : Glass panes shall be measured and paid seperately)

S&F anodised aluminium frame for doors, windows, ventilators, powder coated (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F anodised aluminium door shutters, powder coated (thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc., complete all as specified and directed.

Taking down steel window, cutting u/s projected hinge and fixing/welding the box type hinge, handle, stay etc and refixed in the same opening, complete all as specified and directed. (Note : Box type hinge, handle and stay shall measured and paid separately as 'Supply only').

Supply only box type hinge for fixing/welding in steel window, complete all as specified and directed.

Supply only stay for fixing / welding steel window, complete all as specified and directed.

Supply only chromium plated steel handle left/right for fixing in steel window, complete all as specified and directed.

M&L repair to broken/damaged RCC chajjas by making good with PCC (1:2:4) type B1 or CM (1:3) rendering 15mm thick mixed with and including water proofing compound (as per manufacturer's instructions) to top & sides and soffits in CM (1:4) including necessary form work, reinforecement work if required including dismantling of broken/loose PCC or taking down old plaster at any position and upto 10mtr height from ground, complete all as specified and directed.

Note for item No. 1.00 to 97.00:- (i) Supervisor will collect the Job cards of complaints from the complaint cell on every official working day and feed back should be given to the complaint cell after completion on same day or within 48 hours. (ii) Each complaint must be completed within 48 hrs from the date of job cards.The complaints which will not be rectified within specified time of 48 hrs, recovery of Rs. 400/- shall be made for each complaint from the amount due to the contractor.

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, old size, burnt clay bricks, straight or curved on plan exc 6m mean radius built in CM (1:6), complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, old size, burnt clay bricks, straight or curved on plan any radius built in CM (1:4), complete all as specified and directed.

M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed.

M & L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, string courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M & L for preparing old decorated surfaces of wall/chajja by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying one coat of cement base paint, complete all as specified and directed.

M & L for complete removal of existing treatment of old decorated surfaces of wall/chajja by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying two coats of cement base paint, complete all as specified and directed.

Dismantling fencing wire mesh, any type, complete all as specified and directed.

S&F in repair for 610mm dia barb (unstretched) conseczal super razor punched tape (SRPBT) aluminium base helix coil with and including necessary GI fixing clips for securing, complete all as specified and directed. Note (i) : No of circles - 51 turns per coil, weight of each coil with hessian pack 8.50 Kg (+ 0.5), coverage per coil - 8 RM, central core wire :- Made from 2.5mm dia (+ 0.05mm) GI - H.T.S.S wire as per IS -4454 Part l grade SM UTS : 1600N / sqmm with zinc coating of 240 gm per sqm, galvanized as per IS-2629, Razor punched strip - Razor punched tape is CONSEC-ZAL steel comprising of aluminium base with zinc caoting @ 150 gm per Sgm confirming to ASTM A-792 / A-792M with additional primer treatment of epoxy / polyurethane of 2-m micron thick and final paint top coat of caulfield green shed (BSL 139) by hot dipping process. (ii):- Running length of the fencing shall be measured for payment purpose.

Taking down & straighting deformed concertina coil to proper circular shape and refixing with and including GI wire not less than 2mm dia with existing MS angle frame, complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground post embedded in concrete, complete all as specified and directed.

S&F MS angle iron as in posts and struts in fencing including cutting tops to shape, drilling holes, notching for wire, etc, including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.

Excavation in post holes each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil etc, complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling or mass concrete, complete all as specified and directed.

M&L for 10mm dia and over mild steel round bar confirming to Fe-410 or Fe-310-0 as in tie bars for chain link fencing including necessary fabrication cutting to length bending to shape required, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type, complete all as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with hexagonal or square washers and one nut n. exc. 5cm long 10mm dia neck, complete all as specified and directed.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured), complete all as specified and directed.

All as per item No 120.00 here-in before but fixed in repair, complete all as specified and directed.

Restraining, re-securing of existing barbed wire and fixing to any type of standard rails straining bolts, including making good staples etc, complete all as specified and directed.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLSH) size 1.5 sqmm drawn in and including PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed, (FRLSH) multi stranded copper conductor cable of size 1.5 Sqmm for earth wire connected to common earth dolly for one light/fan point/bell point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 124.00 here-in before but one 3 pin 5 Amps socket outlet on the independent board controlled by other swtich, complete all as specified and directed.

All as per item No 124.00 here-in before but one 3 pin 5 Amps socket outlet on same board controlled by other switch, complete all as specified and directed.

All as per ser item No. 124.00 here in above but for one 16 Amp 3/5 pin switch socket outlet independent point including PVC cable 2.5 Sqmm FRLSH type multistranded copper stranded conductor along with 2.5 Sqmm continious PVC insulated unsheathed multistranded copper conductor cable FRLSH type for as earth wire, complete all as specified and directed.

M&L for sub main wiring with two run of 6 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable (FRLSH) 1100 Volt grade, drawn through and including PVC casing caping (ISI marked) including all accessories and one run of 6 Sqmm single core PVC insulated unsheathed (FRLSH) copper earth continuity conductor including taking down old unserviceable sub main wiring, complete all as specified and directed. (Note : Two runs of 6 Sqmm single core cable with one run of earth continuity conductor including PVC casing caping including accessories shall be measured and paid as one length).

M&L for sub main wiring with two run of 4 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable (FRLSH) 1100 Volt grade, drawn through and including PVC casing caping (ISI marked) including all accessories and one run of 4 Sqmm single core PVC insulated unsheathed (FRLSH) copper earth continuity conductor including taking down old unserviceable sub main wiring, complete all as specified and directed. (Note : Two runs of 4 Sqmm single core cable with one run of earth continuity conductor including PVC casing caping including accessories shall be measured and paid as one length).

S&F in repair switch piano flush button single pole, one way 6 amps 240 volts, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 6 Amp, flush type, complete all as specified and directed.

S&F in repair switch and socket combination 2 in 1, 3 pin 6Amp flush type, complete all as specified and directed.

S&F in repair switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed.

S&F in repair fan regulator, deluxe rotary step type, complete all as specified and directed.

S&F in repair bell electric, heavy duty, ding dong type, 240 volt, single pole, complete all as specified and directed.

S & F in repair angle lamp holder, PVC/polycarbonate type, complete all as specified and directed.

S&F in repair ceiling rose, surface bakelite PVC/ polycarbonate, isolated body with three terminals, complete all as specified and directed.

S & F LED tube 20 W tube light fitting LED batten with square profile extruded and polycarbonate connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length including taking down old unserviceable light fitting, complete all as specified and directed.

S & F LED tube 10 W tube light fitting LED batten with square profile extruded and polycarbonate connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length including taking down old unserviceable light fitting, complete all as specified and directed.

S&F in repair plug top, 15 Amps, complete all as specified and directed.

S&F in repair bell push, flush type, 6 Amps, complete all as specified and directed.

S&F in repair modular switches, 1 way, 6 Amp, 1 module, complete all as specified and directed.

S&F in repair modular switches, 1 way, 16 Amp, 2 module, complete all as specified and directed.

S&F in repair modular bell push 1 way, 6 Amp, 1 module, complete all as specified and directed.

S&F in repair modular socket 6 Amp, 5 pin combined, 2 module, complete all as specified and directed.

S&F in repair modular socket 6/16 Amp, 3 pin combined, 2 module, complete all as specified and directed.

S&F in repair modular cover plate with frame, 1 module, complete all as specified and directed.

S&F in repair modular cover plate with frame, 2 module, complete all as specified and directed.

S&F in repair modular cover plate with frame, 3 module, complete all as specified and directed.

S&F in repair modular cover plate with frame, 4 module, complete all as specified and directed.

S&F in repair modular cover plate with frame, 6 module, complete all as specified and directed.

S&F in repair modular cover plate with frame, 8 module, complete all as specified and directed.

S&F in repair modular surface mounting plastic box of size 3'' x 3'', 1 & 2 module, complete all as specified and directed.

S&F in repair modular surface mounting plastic box of size 4'' x 3'', 3 module, complete all as specified and directed.

S&F in repair modular surface mounting plastic box of size 5'' x 3'', 4 module, complete all as specified and directed.

S&F in repair modular surface mounting plastic box of size 8'' x 3'', 6 module, complete all as specified and directed.

S&F in repair modular surface mounting plastic box of size 9'' x 3'', 8 module, complete all as specified and directed.

S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection & IK 09, 240 volts, 4 way, with necessary lugs for incomming and outgong connections, fixed on wall, single pole and neutral, with 200 Amps rated busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any rating, complete all as specified and directed.

All as per item No 158.00 here-in before but 8 way, complete all as specified and directed.

All as per item No 158.00 here-in before but 12 way, complete all as specified and directed.

All as per item No 158.00 here-in before but MCB DB TPN with 4 way, complete all as specified and directed.

S&F in repair MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

All as per item No 162.00 here-in before but MCB Double Pole (DP) 20 to 40 Amp, complete all as specified and directed.

All as per item No 162.00 here-in before but MCB Triple pole (TP) 25 to 63 Amp, complete all as specified and directed.

All as per item No 162.00 here-in before but MCB Triple pole & Neutral (TPN) 40 to 100 Amp, complete all as specified and directed.

S&F in replacement of blanking plate suitable for DBs/modular box, complete all as specified and directed.

S&F in repair LED lamp 10 watt, B22 base, complete all as specified and directed.

S&F power unit suitable for load max up to 3.5 KW including sockets 25 Amps, and six module box for mounting of power unit and power socket, complete as specified and directed.

Note for item Nos. 123 to 168 :- (i) Contractor has to arrange the manpower for day to day internal electric complaints for RS/TIPNIS/10 AFH area of AF Stn Hasimara and maintaining the records like details of complaints, completion of Job card/complaint slip on standard format and including completion reports of Job card from users/department and including required tools and plants, minor electrical spares like small piece of wire, insulation tape, screws etc required to rectify the complaints and replacing the spare parts in E/M fitting fixtures inside of above mentioned areas. (ii) Spares required shall be measured and paid separately in respective items in BOQ.

Preventive maintenance of swiming pool comprising of 02 Nos centrifugal pump of 10 HP (01 main pump & 01 stand by pump) and 01 No. of vacuum pump, sand filter (02 Nos), electric dosing pump (01 No), microprocessor based constant current technology water disinfector work is to be carried out, with prior intimation, in every month, complete all as specifiied and directed. Note-Fixing & testing charges for item No 171.00 to 173.00 shall deemed to be included in the unit quoted rate of item No. 170.00.

Supply only testing kit for test of PH, PPM, complete all as specifiied and directed. (Make : ASTRAL POOL or equivalent as approved by GE)

Supply only TCCA 90 bag of 50 Kg, as per existing, complete all as specifiied and directed.

Supply only algaecide bag of 12 ltr box, as per existing, complete all as specifiied and directed.

S&F in repair telescopic rode 5 - 10m with handle and adaptor, as per existing, complete all as specifiied and directed.

S&F in repair for leaf rakes net made in polypropelene and white polyester netting clip type connection, as per existing, complete all as specifiied and directed.

S&F in repair for curved brush made in polypropelene and white polyester netting clip type connection, as per existing, complete all as specifiied and directed.

S&F in repair pump impeller (plastic), as per existing, complete all as specifiied and directed.

S&F in repair pump fan with cover, as per existing, complete all as specifiied and directed. M

Supply, installation, testing & commissionig pre-filter basket, as per existing, including taking down old unserviceable one, complete all as specifiied and directed.

Supply, installation, testing & commission 75mm ball valve, as per existing, including taking down old unserviceable one, complete all as specifiied and directed.

Supply, installation, in replacement testing & commission 90mm ball valve, as per existing, including taking down old unserviceable one, complete all as specifiied and directed.

Supply, installation, testing & commission 75mm non return valve with flanges and adaptor, as per existing, including taking down old one, complete all as specifiied and directed.

S&F in repair 30m hose pipe, as per existing, complete all as specifiied and directed.

S&F in repair metallic vacuum head, as per existing, complete all as specifiied and directed.

S&F in repair under water light LED light 6 W, 12V including all necessary fitting, complete all as specifiied and directed.

S&F in repair 300 VA transformer suitable for under water light, as per existing, complete all as specifiied and directed.

Supply and filling in replacement gravel size 1-2mm in sand filter including removing out old gravel from the filter, complete all as specifiied and directed.

Supply and filling in replacement sand 0.4 to 0.8mm in sand filter including removing out old sand from the filter, complete all as specifiied and directed.

S&F in repair fully automatic (FASD)star delta starter along with single phase preventor in powder coated enclosure with PU gasket suitable for 10 HP submersible motor including all electric connection with ammeter and volt meter on/off & trip indicator including protection against phase failure, phase imbalance, phase reversal, complete all as specifiied and directed.

Note: An amount of Rs.62,798.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. NARENDRA KUMAR GARG (BID ID -3075985)

M/S ROY ENTERPRISE (BID ID -3080901)

M/S SARDAR MAL NAHATA (BID ID -3075991)

M/S BISHAL ENTERPRISES (BID ID -3076580)

CONSTRUCTION SHELTER (BID ID -3080785)

SHRI PARTHA DUTTA (BID ID -3078728)

SHRI D P AGARWAL (BID ID -3077851)