Loading
Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹2.3 L
Closing Date
29 Sept 2026, 4:30 pm2d left
Department Of Youth Empowerment And Sports
JAYAPRAKASH AEE
Development Works at Savadatti Taluk Stadium, Belagavi District
DYES/2026-27/OW/WORK_INDENT179
DYES/2026-27/OW/WORK_INDENT179
Open
Other Works
Two Tender Document System(Two Cover)
Department of Youth Empowerment and Sports Bengaluru Commissioner office
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
ALL THE QUALIFICATIONS CRITERIA WILL BE AS PER TENDER DOCUMENT
₹3,860
₹2.3 L
21 Sept 2026
21 Sept 2026
30 Sept 2026
28 Sept 2026
24 Sept 2026
Development Works at Savadatti Taluk Stadium, Belagavi District
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers Nost exceeding 20cm in depth, consolidating each deposited layer by ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggre...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Fabrication, Supplying, Erection, Testing and Commissioning of. Ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) thic...
Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO...
Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, a...
Supply and installation of Exhaust piping using 100MM dia of M.S. as per IS including hardwares like flanges, bends, bolts & Gaskets etc, for Connection of Exhaust Piping from DG set complete wit...
Supply and fixing of MS angle channel with anchor fasteners for supporting of exhaust / fuel piping with epoxy painting. MR
Providing thermal cladding for 100 exhaust pipe by mineral wool wrapping with chicken mesh and Alu. sheet including bends.MR
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (PWD SR 2023-24, VOL-6, PN-42, I Nos-6.11.1)
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm.(PWD SR 2023-24, VOL-6, PN-43, I Nos-6.17.2)
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5 sqmm.(PWD SR 2023-24, VOL-6, PN-43, I Nos-6.17.3)
Approval charges from Electrical inspectorate. MS
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . ...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip. (PWD SR 2023-24, VOL-6, PN-55, I Nos-12.58.6) 25x6mm GI stri...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip. (PWD SR 2023-24, VOL-6, PN-55, I Nos-12.58.6) 600x600x3mm ...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip. (PWD SR 2023-24, VOL-6, PN-55, I Nos-12.58.7)25x3mm Copper s...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI strip. (PWD SR 2023-24, VOL-6, PN-55, I Nos-12.58.11) 600x600x3mm ...
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7) (PWD SR 2023-24, VOL-6, PN-41, I Nos-6...
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7) (PWD SR 2023-24, VOL-6, PN-41, I Nos-6...
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable. (PWD SR 2023-24, VOL-6, PN-41, I Nos-6.7)
Providing and laying in position 100mm dia stone ware pipe in existing trench. (PWD SR 2023-24, VOL-6, PN-41, I Nos-6.8)
Supplying and fixing of class A (medium duty) GI pipe of wall thickness Nost less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV. (PWD SR 2023-...
Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is Nosn-corrosive, thermally conductive, potential to permissible limits, sup...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, pr...
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on pheNoslic/FRP/DMC ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.38)
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.34)
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. (PWD SR 2023-24, VOL-6, PN-18, I Nos-5.22)
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, pr...
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on pheNoslic/ FRP/DM...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.38)
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.34)
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. (PWD SR 2023-24, VOL-6, PN-18, I Nos-5.22)
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...
Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT. (PWD SR 2023-24, VOL-6, PN-18, I Nos-5.26)
Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.27)
Supplying, fixing and wiring rotary selector switch suitable. for Voltmeter. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.28)
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...
Fabricating supplying and mounting MS box made out....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, pro...
Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on pheNoslic/ FRP/DM...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then ...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.38)
Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.34)
Supplying, fixing and wiring 0 to 600V 96x96mm AC Voltmeter on existing panel/wood board. (PWD SR 2023-24, VOL-6, PN-18, I Nos-5.22)
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital ...
Supplying, fixing and wiring 0 to 1500A CT operated AC analog type Ammeter without CT. (PWD SR 2023-24, VOL-6, PN-18, I Nos-5.26)
Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.27)
Supplying, fixing and wiring rotary selector switch suitable. for Voltmeter. (PWD SR 2023-24, VOL-6, PN-19, I Nos-5.28)
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed syst...
Supplying and fixing of metal clad industrial plugs and sockets. 2pole+earth 250V PLUG. 16A(PWD SR 2023-24, VOL-6,Chapter-3- 9, I Nos-3.13.1)
Supplying and fixing of metal clad industrial plugs and sockets. 2pole+earth 250V PLUG. 32A(PWD SR 2023-24, VOL-6, Chapter-3- 9 , I Nos-3.13.1)
Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V PLUG. (PWD SR 2023-24, VOL-6,Chapter-3- 9, I Nos-3.13.3) 16A
Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V PLUG. (PWD SR 2023-24, VOL-6,Chapter-3- 9, I Nos-3.13.4) 32A
Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V SOCKET.(PWD SR 2023-24, VOL-6,Chapter-3- 9, I Nos-3.13.7) 16A
Supplying and fixing of metal clad industrial plugs and sockets. 3pole+earth 440V SOCKET.(PWD SR 2023-24, VOL-6,Chapter-3- 9, I Nos-3.13.8) 32A
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in averag...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. (PWD SR 2023-24, VOL-6,PN-52 , I Nos-21.05). 2.5 to 25 Sqmm
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff. (PWD SR 2023-24, VOL-6,PN-52 , I Nos-21.06). 35 to 95 Sqmm
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7). (PWD SR 2023-24, VOL-6, I Nos-6.6.1)....
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7). (PWD SR 2023-24, VOL-6, I Nos-6.6.2)....
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7). (PWD SR 2023-24, VOL-6 I Nos-6.6.3). ...
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc. complete.(As per Civil SR KSRB 1-2, P-7). (PWD SR 2023-24, VOL-6 I Nos-6.6.5). ...
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable. (PWD SR 2023-24, VOL-6 I Nos-6.7)
Providing and laying in position 100mm dia stone ware pipe in existing trench. (PWD SR 2023-24, VOL-6 I Nos-6.8)
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11). (PWD SR 2023-24, VOL-6,PN-42 , I Nos-6.11.1). 19/20mm
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11). (PWD SR 2023-24, VOL-6,PN-42 , I Nos-6.11.2). 25mm dia
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) (42/6.11). (PWD SR 2023-24, VOL-6,PN-42 , I Nos-6.11.2). 32mm dia
Supplying Bitumen Compound and covering the cable joint pot heads. (PWD SR 2023-24, VOL-6,PN-43 , I Nos-6.13).
Supplying Epoxy Resin and covering the cable Joint . (PWD SR 2023-24, VOL-6,PN-43 , I Nos-6.14).
Supply and wrapping the conductor with camabrick tape roll. (PWD SR 2023-24, VOL-6,PN-43 , I Nos-6.15).
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV Grade as required. (P...
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV Grade as required. (P...
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV Grade as required. (P...
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV Grade as required. (P...
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV Grade as required. (P...
Heavy Duty Copper Terminal Long Barrel. (PWD SR 2023-24, VOL-6,PN-26 , I Nos-59.01). 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm
Heavy Duty Copper Terminal Long Barrel. (PWD SR 2023-24, VOL-6,PN-26 , I Nos-59.02). 35 Sqmm Copper Terminal, Apprx Wt: 17 Gm
Heavy Duty Copper Terminal Long Barrel. (PWD SR 2023-24, VOL-6,PN-26 , I Nos-59.03). 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm
Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is Nosn-corrosive, thermally conductive, potential to permissible limits, sup...
Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is Nosn-corrosive, thermally conductive, potential to permissible limits, sup...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit . ...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (PWD SR 2023-24, VOL-6,PN-54 , I Nos-12.58.2) 25x3mm GI strip
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (PWD SR 2023-24, VOL-6,PN-54 , I Nos-12.58.6) 600x600x3mm GI Plate
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (PWD SR 2023-24, VOL-6,PN-55 , I Nos-12.58.7) 25x3mm Copper strip
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. (PWD SR 2023-24, VOL-6,PN-55 , I Nos-12.58.11) 600x600x3mm Copper plate
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. (PWD SR 2023-24, VOL-6,DSR-25-35 , I Nos-5.16)
Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required. (PWD SR 2023-24, VOL-6,DSR-25-35 , I Nos-5.17)
ESE LIGHTNING ARRESTER : Supply and installation of ESE lightning air terminal with the below technical Parameters. , Stainless Steel material (304 L) , suitable for corrosive Environments. , Delta T...
ESE LIGHTNING ARRESTER - MAST POLE ACCESSORIES (MR) Supply and installation of GI Mast Pole 5-meter length with below accessories , GI Mast pole 5 meter - 01 Nos , GI Base Plate - 1feetx1feet HDP Ada...
LIGHTNING ELECTRO MECHANICAL COUNTER (MR) Supply and installation of lightning event counter with the below technical parameters. , 6 digits Counter , Nosn re-settable Electromechanical display , IP 6...
IP 65 TEST LINK BOX (MR) Supply and installation of Test link box with copper test link inside the IP 65 protected box
Supply and installation of 70 sqmm Single core copper cable for down conductor . (MR)
COPPER EARTH KITMAINTENANCE FREE ADVANCE EARTHING Supply of Maintenance free earthing system of 01 Nos of Copper Earth rod 17.2mm with flat terminal connection EARTH ROD SPECIFICATION , TechNoslogy =...
Supply installation &Testing comissioning og 400 W Royal Lens Flood Light IP-65/WH,LN-80 Tested LED TechNoslogy Over Voltage protection High Power Factor Low THD High Lumen Efficiency,52000 LM 45 Degr...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Savadatti Tender document.docx
Tender Document • 0.62 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .