CONSTRUCTION OF SINGLE OFFICERS ACCN FOR AT RUPA UNDER GE 859 EWS

Amount

Surface dressing n.exc 15 cm deep and getting out in soft/loose soil.

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge.

All as per Item No. 2 above but exceeding 1.50m deep and n.exc to 3.00m and getting out in all kind of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All as per Item No. 4 above but exceeding 1.50m deep and n.exc to 3.00m and getting out in all kind of soil.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in hard / dense soil for laying of cable / errection of poles / stay assembly etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material exc. 250m but n.exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

M & L PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base, foundations, filling and mass concrete complete all as specified and as directed.

M&L for design mix RCC M-25, as in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

M&L for design mix RCC M-25, as in Columns, pillars, piers, posts and struts, etc. basement slabs, under-reamed piles complete all as specified and as directed.

M&L for design mix RCC M-25, as in Beams, cantilevers, projection, bressummers, lintels, etc, complete all as specified and as directed.

M&L for design mix RCC M-25, as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for design mix RCC M-25, as in chajja and the like complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, for flat rough finished surface, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, for flat rough finished surface, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, for flat rough finished surface, complete all as specified and as directed.

Formwork to Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), for flat rough finished surface, complete all as specified and as directed.

M&L, Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per Item No. 19 above but but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders

M&L 40mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate with liquid water proofing compound as per manufacturar instructions as in damp proof course to horizontal or vertical surfaces including necessary formwork, with 200 micron thick polythene film over a coat of hot blown bitumen of grade VG-10 @ 1.5 Kg/m and blended with clean dry sand @ 0.05 Cum/m2, complete all as specified and as directed.

M&L Autoclaved cellular (Aerated) concrete (AAC) block, Grade I of min compressive strength 50Kg/cm2 as in masonry in 10-12 mm thick CM (1:6) or 3-4 mm thin bed mortar / adhesive, complete all as specified and as directed.

M&L 20 mm thick cement plaster (1:4) in two layers of 10 mm thick each with liquid water proofing compound in outer layer only as per manufacturar instructions on other than fair faces of brick work or concrete surfaces, finished surface even and smooth without using extra cement, including making 12mm wide groove at the junction of walls and RCC elements, complete all as specified and as directed.

M&L 15 mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces, finished surface even and smooth without using extra cement, complete all as specified and as directed.

M&L 10 mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces, for laying wall tiles, complete all as specified and as directed.

M&L 5 mm thick cement plaster (1:3) on fair faces of concrete surfaces, such as soffit of slab and chajjas, beam, columns etc, finished surface even and smooth without using extra cement complete all as specified and as directed.

Suppy only liquid water proofing compound.

M&L for Vitrified Ceramic tiles(Dark Shade/Double Charged/Ultra Charged) ,10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry/ epoxy mortar and pointed with grout of the same shade as the colour of tiles including 20 mm thick screed bed in CM 1:6, complete all as specified and as directed.

All as per Item No. 28 above, but as in vertical surfaces such as skirting, dado etc. complete all as specified and as directed.

M&L colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry/ epoxy mortar and pointed with grout of the same shed as the colour of tiles including 20 mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for colour glazed ceramic tiles in vertical surface 450X 300X 7mm thick with combination of Dark, Highlighter and light shade as approved by GE, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and as directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded andjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L for 10mm thick natural wall clading ceramic tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M & L 50mm thick PCC 1:2:4 type B-2 using 20mm graded aggregate, laid in panels as in floor, finished surface even and smooth without usibg extra cement, complete all as specified and as directed.

Supply and fixing plastic dividing strips, 1.5mm thick, inserted in position, conform to design complete all as specified and as directed.

M&L for well consolidating hard core of broken stone, broken to gauge n exc 63 mm complete all as specified and as directed.

M & L 75mm thick PCC 1:3:6 type C2 using 40mm graded aggregate, laid in panels as in floor, including making construction joint at every 3 m interval and corners of building and filled with bituminious mastic or equivalent filler, finished surface even and smooth without using extra cement, complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, FIxed with self tapping screws complete all as specified and as directed.

S&F mild steel work as in wind ties for roof sheet including all necessary drilling, bolting or riveting, etc, including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat andsteel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

S&F 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish after applying two coat of oil bound distemper over one coat of wall care putty, complete all as specified and as directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surfaces etc with Anti-termite treatment using chemical CHLOROPYRIPHOS 20 EC confirming to IS-8944 or Lindane emulsifiable concentrate of 20% with 1% concentrate, complete all as specified and as directed.

M&L for treating the top surface of filled earth, soil under plinth protection etc with Anti-termite treatment using chemical CHLOROPYRIPHOS 20 EC confirming to IS-8944 or Lindane emulsifiable concentrate of 20% with 1% concentrate, at the rate of 5 litres of emulsion per square etre of surface, complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, area n.exc 2.00 Sqm each. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

All as per Item No.47 above but area exc 2.00 Sqm each

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Supply only 10 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.

Supply only 4 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each.

S&F 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F factory made 1st class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats, complete all as specified and as directed.

Supply only galvanised mild steel wire cloth, 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

S&F factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of 2nd class hard wood rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel aving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Prelam PVC sheet on both side to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Framed work of Fe-290 (Gde E 165)as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and as directed.

S&F 0.80 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed.

M&L for mild steel workas in hold fasts, dowel bars, hooks for hanging fans, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel.

S&F 150 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts.

S&F 150 mm extruded brass handles, fabricated type polished

S&F Rim latch with two levers, of brass body bright polished, with brass knob or lever handle and fixed

S&F 300 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.

S&F Aluminum extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.

S&F 150mm Floor door stopper of brass body and tongue with hard drawn steel spring.

S&F decorative type Brass /Bronze curtain rods including all fittings such as end stopper, wall/side braclet etc.

M&L Second class hard-wood as in scantlings

M&L MDF Prelaminated particle board, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work.

S & F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Make : KAFF/Hettich

S & F Ball bearing runners 400 mm Telescopic (KA 5632) full extension load capacity 45 kgs, Make KAFF/Hettich

S & F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. Make : Harrison (Jasmine) or equivalent as approved by AO

S & F Ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. Make : Hettitch or equivalent as approved.

S&F 500 ltr capacity PVC water storage tank cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20/25mm bore of iron pipe and making connection for inlet and outlet with 15mm bronze gate valve with Iron wheel head,screw both ends for iron pipe and fixed on outlet complete all as specified and directed.

M & L Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed.

S&F 15mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed.

S&F Vitreous china table top WHB white colour. Make - Jaquar, Cat Par No - JDS-WHT-25901, and equivalent model in Roca / Kohler.

S&F Vitreous china Single piece WC white colour. Make - Jaquar, Cat Par No - CNS-WHT-851S300SPP, and equivalent model in Roca / Kohler.

S&F CP wall mixer. Make:- Jaquar, Cat Part No :- FUS-CHR-29273UPR, and equivalent model in Roca / Kohler.

S&F CP single lever Basin mixer. Make:- Jaquar, Cat Part No :- FUS-CHR-29005NB, and equivalent model in Roca / Kohler.

S&F CP health foucet with 1.00m flexible tube and wall hook. Make:- Jaquar Cat Part No :- ALD-565, and equivalent model in Roca / Kohler.

S&F CP angular stop cock 15mm dia single way. Make:- Jaquar Cat Part No :- FUS-CHR-29053, and equivalent model in Roca / Kohler.

S&F CP overhead shower 100mm round shape single flow (ABS body chromium plated with gray face plate) with rubit cleaning system. Make:- Jaquar Cat Part No :- OHS-1989, and equivalent model in Roca / Kohler.

S&F CP toilet paper holder. Make:- Jaquar Cat Part No :- AKP-CHR-35751P, and equivalent model in Roca / Kohler.

S&F Corner GLASS shelf with brackets. Make:- Jaquar Cat Part No :- ACN-CHR-1173,and equivalent model in Roca / Kohler.

S&F CP towel Rail 600mm long "D" type. Make:- Jaquar Cat Part No :- AKP-CHR-35711PS, and equivalent model in Roca / Kohler.

S&F CP towel ring. Make:- Jaquar Cat Part No :- AKP-CHR-35721P, and equivalent model in Roca / Kohler.

S&F CP soap dish. Make:- Jaquar Cat Part No :- AKP-CHR-35731P, and equivalent model in Roca / Kohler.

S&F CP Tubbler holder. Make:- Jaquar Cat Part No :- AKP-CHR-35741P, and equivalent model in Roca / Kohler.

S&F Looking Mirror of size 630x445 mm. Make:- Jaquar Cat Part No :- AKP-CHR-35795, and equivalent model in Roca / Kohler.

S&F CP Towel Rack. Make:- Jaquar Cat Part No :- AHS-CHR-1581H, and equivalent model in Roca / Kohler.

S&F CP double coat hook. Make:- Jaquar Cat Part No :- AKP-CHR-35761P, and equivalent model in Roca / Kohler.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

M&L for two coat of synthatic enamel paint over one coat of red oxide primer on new steel surfaces including prepration of surfaces, complete all as specified and as directed.

M&L distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over 1 mm thick plaster of paris putty including prepration of new concrete/ plastered surfaces of wall, complete all as specified and as directed.

M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.

M&L for providing precast cement concrete in cover slabs using type B1 1:2:4 & setting in CM 1:6

M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.

Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipes 150mm dia single sockted in any length with rubber ring joints fixed to walls.

Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed..

S&F PVC (SWR) bends any radius , 110mm dia.

M&L for construction of 1.2m x 1.50m sokage well , excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed precast PCC block masonary, RCC cover slab, PVC Vent pipe and cowl, filling with brick bats complete all as specified in drawing and as directed.

M&l for construction of Septic Tank in any type of soil, foundation in PCC 1:2:4, PCC block masonray in CM 1:4, RCC slab cover including RCC precast manhole cover having 6mm plate embedded all around/ fibre reinforced the cover with angle iron frame vent shaft and sludge chamber etc complete for 10 Users as per TD Drg No CESZ/2019/TD-115 Sheet 1/4 to 4/4.

M & L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub-base complete.

M&L for sand cushion under floors or in foundation including watering and consolidation

M&L for machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade

M&L for providing, cement concrete 1:2:4 type B1 in roof kerbs or mud stops, rounded or chamfered on edges

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)

Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete surfaces

M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregate in surface channel, bed of drain, complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:4 on concrete surfaces finished even and smooth with neeru finish using extra cement .

RCC nominal mix 1:2:4 Type B1 (20mm graded aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

RCC 1:2:4 using type B1 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts

Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of primer

M&L mild steel work as in gate framed work of angle or other section with gusset plates braces etc complete

S&F mild steel work as in Ornamental capital as per manufacture design fixing in gate framed work complete

M&L for walling of RR, uncoarsed, well bonded bedded & solidly hearted built in cement mortar 1:6

Extra over stone walling for hammer dressing to face stones & dressing to face beds and joints as specified at RR walling uncoarsed or brought upto coarse, max depression on face from straight edge held against the dressed surface n.exc 20 mm granite or trap stone.

M&L for raised pointing to RR, uncoarsed or brought upto course stone masonry in cement mortar 1:3

Providing pre cast PCC bonders (for stone walling), type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6

S&F 75 mm dia PVC (SWR) pipe in any length with rubber joints laid in trenches or floors

M&L for Hand packing (any thickness )at back filling with broken stone or boulders.

M&L for providing cement concrete in coping type B1 1:2:4 (20 mm graded stone aggregate) in coping

S&F GI tubing 40mm dia, medium grade, ISI Marked conforming to IS 1239 Part-I 2004, with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc,for the following sizes complete all as specified and directed.Make: Jindal/ Nezone/ BST/Prakash Tubes (Note: Exacavation and earhwork shall be measured and paid for separately.)

S&F GI tubing 25mm dia, medium grade, ISI Marked conforming to IS 1239 Part-I 2004, with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc,for the following sizes complete all as specified and directed.Make: Jindal/ Nezone/ BST/Prakash Tubes (Note: Exacavation and earhwork shall be measured and paid for separately.)

S&F Bronze gate valve40 mm dia with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984,for the follwing sizes complete all as specified and directed. Make : Leader / Zoloto / NVR

S&F Bronze gate valve 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984,for the follwing sizes complete all as specified and directed. Make : Leader / Zoloto / NVR

Supply and fix electric water heater(Geyser), storage type of capacity 25 litre, BEE 5 star rated complete with accessories such as safety wall, thermostate, NRV,water connection pipes etc. complete all as specified and directed by Engr in charge

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable cross-sectional area 4 sq. mm, but sec. area 95 sq. mm, 3½ Core with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed with required aluminium cable lugs all as specified and directed. Make of Cable : Havells / Polycab / Finolex / Grandlay

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable cross-sectional area 4 sq. mm, but sec. area 35 Sq. mm, 3½ Core with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed with required aluminium cable lugs all as specified and directed. Make of Cable : Havells / Polycab / Finolex / Grandlay

Supply and laying in replacement un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection complete all as specified and directed.

Supply and spreading clean dry river sand in trenches for cushioning of UG cables complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised iron Earth strip 25 x 4mm by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

Material & Labour for Light /fan/bell point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLS), 1100 volts grade, multi-stranded copper conductor, in and including PVC Conduitof adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 143 here in before but for one 5 pin socket outlet 5 Amp Multipurpose same board using 1.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 1.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified and directed.

All as per item No.143 here in before but for one 3 pin socket outlet 5 Amps independent.

M&L for Point wiring for one socket outlet 15 Amp on independent board with 4 sq mm (nominal area), PVC insulated unsheathed ((FRLS), 1100 volts grade, multi-stranded copper conductor, in and including PVC conduit of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLS)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Make : Havells/Anchor/Finolex/Richa

M&L for Point wiring for one socket outlet 15 Amp on independent board with 2.5 sq mm (nominal area), PVC insulated unsheathed ((FRLS), 1100 volts grade, multi-stranded copper conductor, in and including PVC conduit of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLS)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Make : Havells/Anchor/Finolex/Richa

M&L for sub main wiring complete with 2 runs of 6 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through surface or concealed in and including PVC conduit of appropriate size and connecting terminal ends including provision of 1 run of 4 Sqmm PVC insulated heavy duty and unsheathed cable with multistranded copper conductor for earth continuity conductor and connecting to earth dolly complete all as directed by Engr-in-charge.

S&F Switch socket combination in 6 Pin, 16A Modular type complete all as directed by Engr-in-charge.

S&F socket outlet 2/3 pin,6A modular type complete all as directed by Engr-in-charge.

S&F Modular white cover plate with frame,1 module complete all as specified and directed.

S&F Modular white cover plate with frame,2 module complete all as specified and directed.

S&F Modular white cover plate with frame,3 modulecomplete all as specified and directed.

S&F Modular white cover plate with frame,6 module complete all as specified and directed.

S&F Modular metal box,1/2 module complete all as specified and directed.

S&F Modular metal box, 3 module complete all as specified and directed.

S&F Modular metal box, 6 module complete all as specified and directed.

Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting complete all as specified and directed. Make: Havells/ Anchor/ Legrand.

S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make: Havells/ Bajaj/ Crompton Greaves/ Phillips.

S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.

Supply & fixing switch modular type, single pole, one way 6 Amp, 240 Volts complete all as specified & directed. Make : Anchor/Legrand/Havells

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. Make : Anchor/Legrand/Havells.

Supply and fix regel batten for LED Tube universal batten for G 13 T8 lamps complete with all accessories internally prewired and incl connecting upto Ceiling Rose with 0.5 sqmm twin core copper flexible conductor cable includig Photon ultra plus LED Tubelight 20W(single side connection) Ultra bright LED Polycarbonate Tubelight with 10% THD with very high efficiency suited for installation T8 Tubelight with G13 lamp holders to give glare free light and mounting casing box 2 Nos all as specified and directed by Engr in Charge. Havells Cat Part No REGALBATTENT8UPTO01X22WDSBSWH & PHOTONULTRAE2. 01213T8SSTL18 WLED86 5SPC or equivalent in Havells/BajajPhillips/Crompton or any manufacturer approved by E-in-C's Branch.

Supply and fixing LED Lights fittings 2 feet, 10W,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable and multi colour change LED tube light of suitable size from ceiling rose complete all as specified and directed.

S&F LED Bldg Secy light fitting 35 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver with Make - CG/Havells/Philips.The quoted rate includes S & F of GI brackets for fixing LED street light fitting fabricated out of GI tubing 32 mm dia light grade,0.9 mtr long,bend to 120 degree shape by cutting,welding and well finishing including MS clamp of flat iron of size 32 x 4 mm - 02 Nos all as specified and directed.

S&F MCB SPN having braking capacity 10KA, 40 to 63 Amps, 240 V complete all as specified and directed. Make: Havells/L&T/ABB/Schneider/Legrand

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. Make: Havells/L&T/ABB/Schneider/Legrand

Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way Double Door single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board, complete all as specified and directed.

S&F bell push Modular one way 5/6 Amp, 240 volt including taking down unserviceable one complete all as specified & directed. Make : Anchor/Havells (Reo)/Kinjal/Kay

S&F bell electric AC 240 volt, 50 HZ ,multi music type complete all as specified & directed. Make : Anchor/Havells /Kinjal/Kay

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing post top lantern LED type 10 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as specified and directed.

M/S KARKIES CONSTRUCTION & CO.

M/S KUMAR CONSTRUCTION

M/s Miza Enterprises