Widening and Improvements of Almel-Sindagi MDR road Km 18.00 to 20.00 in Sindagi Taluka of Vijayapur District(Proposed Km 18.390 to 19.50) (H/A 5054-04-337-0-01-154) Appendix-E 2023-24

Clearing and Grubbing Road Land.Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than oundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and tec...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Preparation and Surface Treatment of Formation. Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, trimm...

Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved

material obtained from borrow pits with all lifts & leads,

transporting to site, spreading,...

Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mecha...

Dense Graded Bituminous macadam Grading - ii for traffic 20 mSa in all respects. Providing and laying Dense Graded Bituminous Macadam with

40/60 TPH capacity HMP using crushed aggregates of specified...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom ---- Charge...

Bituminous Concrete Grading ii for traffic 20 mSa Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous...

Road Marking with Hot Applied Thermoplastic Compound

with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

Supplying and Fixing of Molded Shank Raised Pavement

Markers / Cat's Eye made of polycarbonate and ABS moulded

body and reflective panels with micro prismatic lens capable of

providing total internal ...

Construction of unlined surface drains of average cross-

sectional area 0.40 m2 in soil to specified lines, grades,

levels and dimensions. Excavated material to be used in

embankment with a lift upto ...

Scarifying the existing bituminous road surface to a depth of 50

mm and disposal of scarified material by Mechanical Means using

Hydraulic excavator with in all lifts and lead ---- Charges with all le...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 408 ---- Charges with all lead and lift including other i...

Supplying, fitting and placing TMT FE 550 / 550D Steel einforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying...

Tack coat on Granular surface treated with primer Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface ---- C...

Earth work excavation for Foundation by mechanical

means for all works & depth upto 3 m, as per drawing

and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The ranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and removing centering, shuttering, strutting, propping etc.,and removal of form work for RCC works including cost of all materials, labour complete as per specifications. (5%) ---- Charges ...

Providing and Laying Reinforced Cement Concrete Pipe

NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material i...

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/we...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

3rd year maintainence

Road maintenance for 3rd year for road with DBM + BC as wearing coat.

Maintenance of Road for 3rd year by clearing and uprooting vegetation on either sides of the road, maintainence of surface drains ...

4th year maintainenc

Road maintenance for 4th year for road with DBM + BC as wearing coat.

Maintenance of Road for 4th year by clearing and uprooting vegetation on either sides of the road, maintainence of surface drains ...

5th year maintainence

Road maintenance for 5th year for road with DBM + BC as wearing coat.

Maintenance of Road for 5th year by clearing and uprooting vegetation on either sides of the road, maintainence of surface drains ...

Electrical Work Street Light

Decorative Median Light Poles fabricating , Supplying and Errection of 10 Mtrs Long hot dip glavanized conical pole with BSEN10025 grade S 355 with JO steel Plate for shift IS 2062 for Base plate with...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires. ---- Charges with all lead and lift in...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 16 Sq...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Laying of Cable in Existing Trench/GI Pipe/Stone Ware/RCC Hume pipe Using Wooden/Aluminium Rollers as Directed by the Department Staff - LT Cable - 2.5 to 25 Sqmm

---- Charges with all lead and lift ...

Aluminium End Terminal (Lug) - 16 sqmm

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in c...

Aluminium End Terminal (Lug) - 25 sqmm

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in c...

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...

Guy Wire and GI wire - 8 SWG GI Wire ( 4.064 mm Dia ) Std Wt : 125KG/KM

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work an...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Earth work for Foundation by mechanical means for all works & depth up to 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, incl...

Providing and laying in position plain cement concrete for levelling course fo all works in foundation. The granite/trap/basalt crushed graded course aggregates and fine aggregates as per relevant IS ...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - 50x5...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

---- Charges with all lead and lift including other incidental charges whe...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which a...

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 - 95/10...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

---- Charges with all lead and lift including other incidental charges wherever neces...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. - 32Amps

---- Charges with all lead and lift including other incidental cha...

Electrical Pole shifting

Pre-Stressed Tubular Spun 11Mtr Long -500Kg WL ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engine...

RCC Pole - 9 Mtr Long, 145 kg WL (HT INTERMEDIATE POLE) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by t...

PSC Pole - 8 Mtr Long, 200 kg WL (STUD POLE) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer...

RCC Pole - 9 Mtr Long, 145 kg WL (HT POLE) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer i...

11 KV Horizontal Cross Arms with single top Support , Clamps , Bolts & Nuts and Washers for RCC poles -MS ---- Charges with all lead and lift including other incidental charges wherever necessary for ...

11KV PIN Insulators (POLYMERIC) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of...

11KV 45KN Polymeric Insulators (DISC) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in cha...

Guy set Cmplete ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

Spiral Earth Electrode ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

R&R RABBIT ACSR CONDUCTOR ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

Rabbit ACSR Conductor ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

LT 2 Pin Cross Arm with clamps, bolts, nuts for PSCC

Pole - 9 Mtr Long, 200 Kg WL ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of...

DP Structure with RCC Pole- 9 Mtrs Long, 145 kg WL ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the En...

11 kv 200amps, Single break Gos ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of...

Pre-Stressed Tubular Spun 11Mtr Long -500Kg WL ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engine...

Three H Frame without Transformer Seating and Seating angle support cross arm for 11 M Spun Pole for 63/100/250/500 kVA (UG Cable) - MS ---- Charges with all lead and lift including other incidental c...

DP Transformer structure using RCC Pole structure 9 meter long ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as direct...

Guy set complet no.15 ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

11 kV, 45 KN Polymeric Insulator ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge o...

Earthing materials pipe type for grounding (Single

Electrode with accessories) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of wo...

LT DISTRIBUTION BOX With MCB ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of wo...

GI WIRE 8 SWG ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

GUY Wire 7/10 SWG ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

LT Protection Kit ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

LT wiring Kit ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

H G Fuse units ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

Guarding ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

RCC Pole - 9 Mtr Long, 145 Kg WL ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge o...

Spiral Earth Electrode ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

LT 4 Pin X Arms with complete set -MS ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in cha...

1.1kv pin insulators with GI Pins ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge ...

8kv strain insulators ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

Guy Set Complete with No. 15 Strain Insulator ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Enginee...

Rabbit ACSR Conductor ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

LT 2 Pin Cross Arm with clamps, bolts, nuts for PSCC Pole - 9 Mtr Long, 200 Kg WL ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of...

Releasing of Rabbit conductor ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of w...

Releasing of Horizontal X Arms set ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge...

Releasing of 9Mtr PSC Poles ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of wor...

Releasing of 9Mtr DP Set ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charge of work.

Service wire releasing and refixing ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer in charg...