REPAIR MAINTENANCE OF OLD SIGN BOARD IN DOMESTIC AREA AT AF STATION GWALIOR

Amount

S & F in repairs including taking down for retro reflective HIP grade sign sheet including required colour fully computerizes letters, signs etc on pressure sensitive sheet and fixed adhesive complete all as specified and directed.

Supply and fixed stainless steel pipe, angle iron, square pipe, flat and nut & bolt and any accessories required for fixing of sign board.( All material stainless steel) incl steel welding if required.

S&F in repairs aluminium road studs (Raised pavement marker size 11x100x20 mm) made of two side polycarbonate prismatic reflector with square nails on both side for maximum retro reflection in wet and dry conditions and to be fixed with Epoxy-resin based adhesive complete fixed in repair all as specified and directed. Make :- Safety Master model No : SM-122 or equivalent as approved by GE.

Supply and fixing in repair delineator made out of 40mmx40mmx2 mm thick mild steel square hollow pipe of length 1200 mm duly painted with applying two coats of synthetic enamelled paint over and including one coat of red oxide primer including three strip of HIP retro reflective type-IV sheet of size 150 mm in height all around of square pole with different colour including necessary excavation and earth work for fixing and embedding in ground with and including PCC 1:2:4, type B1 block of minimum size 300mmx300mmx300 mm and provn of hold fast complete all as specified and directed. (MAKE : GPD-1233 75mm dia 1200mm Long or equivalent as approved by GE

S&F modular speed breakers/ rumble strip made of sturdy plastic (ABS), high resistance to severe impacts, interlocking grip design allows to behave one single bump with pre colour material (Black/ Yellow) and UV stabilisers result in permanent colours ith and including acrylic reflectors fixed on front or back. Fixing shall be done by drilling hole on road and breakers shall be fixed with resin based adhesive complete all as specified and directed. Make: Any ISI Mark as approved by GE

Supply and fixing of 4 mm thick (ACP) aluminum composite panel complete all as specified and directed. Make: Any ISI marked as approved by GE.

M&L for PCC 1:2:4 Type B2 (using 40 mm graded aggregates) as in foundation, filling and mass concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for screed bed or bedding layer, 15 mm thick, in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Excavating in post hole each nexc 0.5 cum, getting out in soft and loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

M&L for providing PCC 1:2:4 Mix, type B2 (Using 20 mm graded stone aggregate) as in boundry pillars and post etc (including caps and bases) complete all as specified and directed.

M&L for chequered cement concrete tiles of size 20CMx20CMx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat sement slurry complete all as specified and directed.

R.B. ENTERPRISES

USHA TRADERS

M/s Pal Construction

M/s Sai Builders

M/s A.K. Trading Co.

M/s Shubham Construction Co.

M/S YOGANSH CONSTRUCTION CO.