PROVISION OF TOILET BLOCK FOR STAFF NEAR P-62 COMPLEX AT MI LINE AND PROVN OF PARKING SHED NEAR OFFICERS MESS AT HEBBAL GARRISION UNDER GE (NORTH) BENGALURU

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out hard dense soil all as specified & directed

Removing excavated soil to a distance exc. 1.50 km but not exc. 5 km and depositing where directed all as specified.

Excavation in trenches not exc 1.5m wide and 1.5m deep and getting out in hard/dense soil for fundation and smilar work all as specified & directed

Removing excavated soil to a distance exc. 250 m but not exc. 500 m and depositing where directed all as specified.

Returning filling in including spreading levelling, watering and well ramning in layers not exc 25 cms thick all as specified & directed

Earth Filling under floors or in foundations including watering and consolidation all as specified & directed

M & L for Plain Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in in foundations, filling and mass concrete all as specified & directed

M&L for Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, Nominal mix in Foundations footings, plinth beams, bases for columns, mass concrete etc all as specified & directed

M&L for Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, Nominal Mix in Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified & directed

M&L for Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, Nominal Mix, as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified & directed

M&L for Reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, Nominal mix as in chajjas or similar items all as specified & directed

M&L for Formwork to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter finished fair flat surface all as specified & directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. finished fair flat surface all as specified & directed

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) finished fair flat surface all as specified & directed

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window-cills, concrete railing, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide in rough finished flat surfaces of concrete.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges finished fair flat surface all as specified & directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm, cut to length, bent to shape required, including cranking, bending spirally as Stirrups, spacers, binder all as specified & directed

M& L for water proofing treatment to RCC roof slab with following specification complete all as specified & directed :- (i) screed bed/rendering 15mm thick cement mortar (1:3) mixed with and including liquid water proofing compound as per manufacturers instructions. (ii) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density o 0.87-0.89 Kg/Lit at 25º C on the prepared dry roof surface. (iii) Laying 3 mm thick APP modified water proofing membrane reinforced with non woven polyester matt complying following specifications :- (a) Membrane weight>3.8 Kg/ sqm

(b) Non woven polyester weight>160 gm/Sqm (c) Softening point of membrane >150º C (d) Joint tensile strength longitudinal >650 Sqm Cm at 230º C & Transverse> 450/Sq Cm (e) Tear strength - longitudinal >300N & Transverse>250 N Direction (f) Elongation > 30 % (g) Impermeability under water pressure > 3 Kg/Sq cm (iv) apply a coat of solar reflective bituminous aluminium paint @ 0.10 litre/sqm over memberane

M&L for Pre-cast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in solid block masonary exceeding 10cm in width and setting in cement mortar (1:6) complete all as specified and as directed

M&L for Pre-cast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in solid block masonary not exceeding 10cm in width and setting in cement mortar (1:4) complete all as specified and as directed

M&L for rendering 15mm thick in two layers i.e., backing coat 10mm thick cement mortar (1:6) and 5mm thick floating coat in CM 1:4 mixed with water proofing compound over brick or concrete wall surfaces all as specified and as directed. (Note : WPC will be paid separately)

Supply only liquid water proofing compound, ISI marked, all as specified and as directed.

M&L for rendering 10mm thick cement mortar (1:6) on brick or concrete wall surfaces all as specified and as directed

M&L for rendering 5mm thick cement mortar (1:3) on soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like all as specified and as directed.

M&L for Hardcore of broken stone of gauge not exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and as directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in 100mm thick sub base for floors, ramp etc.all as specified and as directed.

Material and labor for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in 25 mm thick in flooring finishing cement concrete surface even and fair all as specified and as directed.

M&L for Plain Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in 75mm thick plinth protection finished even and smooth without using extra cement including joints filling with sealing compound Grade "A" complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in coping, as in hold fast block, filling steel frame of window, in roof kerbs of mud stops, rounded or chamfered on edges cills, steps etc; all as specified and directed.

M & L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm as in floors etc, incl screed bed or bedding layers of 15 mm thick cement mortar (1:6) for laying floor finishes set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed

M&L Glazed ceramic tiles coloured 350mmx 250mmx 7mm /450mmx350mm x 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

M & L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site all as specified and as directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified and as directed

S & F Butt hinges medium weight, cold rolled mild steel 100mm size and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S & F Aluminium anodized barrel tower bolt of extruded section of size 125mm long complete all as specified and directed.

S & F Extruded Aluminum handles 150mm size, fabricated type, anodised all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in coping, hold fast block, steel frame of window back filling and in roof kerbs of mud stops, rounded or chamfered on edges cills, steps etc; all as specified and directed.

M&L for Granite 18/20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) us?ing marble dust with admixture of pigment to match with shade of granite. all as specified and directed.

S&F rotational moulded polythylene water storage tank 500 ltrs capacity, triple layered (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S&F Vitreous china european type pedestal pattern water closet of size 730x370x700mm, floor mounted one piece toilet noise free gentle closure, white, oval shape or Reach shape complete all as specified and as directed. (Make Kohler Model No Ove K-17629IN-SM-0 or equivalent in Jaquar or Hindware)

S & F Wash hand basin, Vitreous China (flat back or angle back type) size 550mm x 400mm with & including necessary vitreous china pedestal including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F PVC (SWR) Pipe 110 mm dia bore, single socketed in any length with rubber ring joint laid in trenches /fixed on floor / walls including jointing with solvent cement all as specified and directed.

S&F PVC (SWR) bends 110 mm dia bore with access door any radius complete all as specified and directed

S&F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia bore complete all as specified and directed

S&F PVC (SWR) vent cowl 110 mm dia bore complete all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. (Minimum weight 190gms)

S & F Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and directed.

Supplying and laying of CPVC pipes 25mm outer dia bore SDR 11 & Plain CPVC SDR 11 fittings in to walls, ceilings or in floors etc.,complete all as specified & directed

Supplying and laying of CPVC pipes 20mm dia bore SDR 11 & Plain CPVC SDR 11 fittings in to walls including cutting chases for concealing in walls complete all as specified & directed.

Supplying and fixing of CPVC Brass Elbow 25mm dia bore complete all as specified & directed.

Supplying and fixing of CPVC 25mm dia bore Brass Tee complete all as specified & directed.

Supplying and fixing of CPVC 20mm dia bore Brass Elbow complete all as specified & directed.

Supplying and fixing of CPVC 20mm dia bore Brass Tee complete all as specified & directed.

Supplying and fixing of CPVC 25mm dia bore BALL VALVE complete all as specified & directed.

S&F Mixer for wash hand basin for mixing hot & cold water, Brass chromium plated for screwed down for iron pipe 15 mm dia bore complete all as specified & directed

S&F wall mixer for mixing hot and cold water, Brass chromium plated, screwed down for iron pipe 15mm dia bore and fixed complete all as specified and directed.

S & F Bib taps fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15 mm dia bore or for brass ferrule complete all as specified and directed.

S & F Stop valves, fancy type with long shank and cup (concealed type), chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm dia bore or for unions complete all as specified and directed.

S & F Stop valves/angle valves, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm dia bore or for unions complete all as specified and directed.

S & F PVC waste pipe 32mm dia for WHB/ urinal etc, complete all as specified and as directed.

S & F PVC connections 15mm dia 600mm long with PTMT nuts complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coat of cement base paint, including one coat of white washing primer complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of Acrylic emulsion distemper over a coat of alkali resistant primer complete all as specificed and as directed

M & L for preparation of newly plastered surfaces of Ceilings, soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like and applying three coats of of white wash complete all as specificed and as directed

S&F Aluminum powder coated ventilators of size 500mm x 850mm, with adjustable 4mm thick figured glass louvers, fixed in half portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed.

M & L for powder coated aluminium grill ( powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, weight not less than 2.507kg/sqm, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening as per requirement all as specified and as directed.

Excavating over areas not exc 1.50m deep and getting out in Hard/Dense soil complete all as specified and directed.

M & L for cement concrete paver block 60mm thick of M-35 grade, factory made chamfered edge with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all as specified and as directed.

M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Excavating in post holes (Or similar) in Hard/dense soil, each not exc 0.5 Cum getting out, returning fillin in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm thick watering and removing surplus soil to a distance n.exc 50 m and making good all as specified & directed

M&L for Plain Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregrate as in foundations, filling and mass concrete all as specified & directed

S & F Rolled Mild Steel work in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe-410- W(Gde-E-250) quality-B all as specified & directed

S & F for steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410- W(Gde-E-250) quality-B all as specified & directed

S & F Pre - painted galvalume sheet, aluminum zinc coating, 150AZ, GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed

M&L for Preparation of new steel or iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified & directed

M&L for Mild steel screw bolts(machine made) 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long all as specified & directed

M&L for Point Wiring with PVC insulated unsheathed cable 1.5 Sqmm single core 1100 volts grade multi stranded FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories including GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., including of PVC insulated single core multi stranded copper conductor cable 1.5 Sqmm as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :-

One light point controlled by one switch

One fan/exhaust point controlled by one switch/regulator

One 3 pin socket out let 5 Amp on same board with other switches Note for item No 80 complete :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Terminal box is deemed to be included in the quoted rate. (iv) Cost of any length of cable from DB to any switch/ socket board be included in point wiring.

S&F LED batten with luminaire suitable for indoor applications 18/20 Watts, 4 feet long with extruded aluminium housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj Cat No.BCLAB 18 WH LED P or equivalent Makes & model specified in P S

S&F LED batten with luminaire suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or equivalent Makes & model specified in P S

Supply and fix Modular switch 1 way 6Amps,1 module, 230volts all as specified and directed

Supply and fix Modular Socket, 6Amps - 2/3 pin combined 2 module all as specified and directed

S&F MCB SPN 32 Amps 240 volts C curves etc complete all as specified and as directed

S&F MCB single pole 240 volts 6 to 32 Amps, C curves complete all as specified and as directed

S&F MCB Distribution Board SPN 4 way, double door type 240 volts with 200 Amps rated bus bar as specified and as directed.

S&F ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

M&L for earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS TMT bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, test point complete all as specified and as directed.

S&F LED bldg security light fitting 30Watts capacity with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection complete all as specified and as directed. (Make:- Bajaj Cat No.:- ENXT P 30L WH SY PC SD or equivalent Makes specified in P S)

S&F Bracket made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc including applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed.

S&F Exhaust Fan, steel body AC single phase, 230V of size 200mm Sweep with, blade and frame and louver all as specified & directed.

JAIHIND ENTERPRISES (BID ID -3483409)

OM CONSTRUCTIONS (BID ID -3481951)