REPAIR/ MAINTENANCE OF CERTAIN E/M FITTINGS/ FIXTURES AND INTERNAL WIRING AT CERTAIN BUILDINGS OF SP MARG MD ACCN, ABH MESS AND TPT UNIT ASC UNDER GE NEW DELHI

Amount

Taking down copper/aluminium point wiring ( fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,Light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L of point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requiremnt for the following Note:if Cutting & chashing required shall be measured/paid under relevant items. Make:-Polycab/Havells/RR

One light/ceiling fan/exhaust fan point controlled by one way switch 5 amps.

One bell / buzzer point controlled by one bell push

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No 2 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board as specified and directed by Engineer inCharge

All as per item No 2 above but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4Sqmm single core cable on independent circuit as specified and directed by Engineer inCharge

M&L in replacement of point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC conduit of suitable sizes of medium grade ISI marked for surface wiring and its accessories, including MS sunken box and hylem sheet of suitable size, ISI marked for housing the switches and sockets. Make:-Polycab/Havells/RR :-

One light/fan/exhaust fan point controlled by one nos, one way switch.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

One bell / buzzer point controlled by one bell push

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board Note:- On ceiling, wiring shall be done in existing conduit.

All as per item No. 5 here in before but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth on brick walls.

Taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified

S&F submain wiring alongwith earth wire with 2 run of 4 Sqmm (Main Cable and neutral) and one run of 4 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm dia bore with all fittings accessories all as directed. Make:-Polycab/Havells/RR

S&F submain wiring alongwith earth wire with 2 run of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories all as directed. Make:-Polycab/Havells/RR

S&F submain wiring alongwith earth wire with 2 run of 10 Sqmm (Main Cable and neutral) and one run of 10 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories all as directed. Make:-Polycab/Havells/RR Note for item No 9 to 11 : 2 run of main cable, one run of earth wire and one run length of PVC conduit of suitable bore shall be considered as one run all as specified.

S&F of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame. all as specified.Make:-Indoasian/Havells/Legrand

S&F of modular switch 16 A SP one way 240 volts all as specified Make:-Indoasian/Havells/Legrand

S&F modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts all as specified. Make:-Indoasian/Havells/Legrand

S & F of modular socket outlet 16 A-2/3 pin combined 240 volts all as specified. Make:-Indoasian/Havells/Legrand

S&F modular bell push 6A with Neon 1 module 240 volts all as specified. Make:-Indoasian/Havells/Legrand

S&F electronic fan regulator modular type 120Watt step type Double Modular as per existing all as specified. Make:-Indoasian/Havells/Legrand

S&F in replacement switch piano flush button single pole one way 6 amps all as specified.

S&F in replacement switch piano flush type 15 amps single pole one way all as specified. Make:-Indoasian/ANCHOR/Havells

S&F in replacement of socket outlet 5/6 amps 2 in 1, 3 pin flush type all as specified. Make:-Indoasian/ANCHOR/Havells

S&F in replacement socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type all as specified. Make:-Indoasian/ANCHOR/Havells

S&F DIMMER/ STEP type electronic fan regulator flush type 230 volts all as specified. Make:-Indoasian/ANCHOR/Havells

S&F electric bell Ding-Dong AC 230 Volt comlete all as specified and directed by Engr - in - Charge all as specified. Make:-Indoasian/ANCHOR/Havells

S&F ceiling rose, 3 phase/ PVC/ polycarbonate isolated body all as specified and directed by Engr - in - Charge all as specified.

Taking down DB of SPN 4/8/12 way type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc.

S&F sheet metal enclosures for DB's when MCB to be used,SPN double door 240 volt, 12 way with 200 amps rated bus bar. all as specified. MAKE:-Legrand/Havells/HPL

S&F sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 8 way with 200 amps rated bus bar. all as specified. Make:-Legrand/Havells/HPL

S&F sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 4 way with 200 amps rated bus bar. all as specified. Make:-Legrand/Havells/HPL

Taking down MCB type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc.

S&F of MCB TPN 40 to 63 Amps, 415 V. all as specified. Make:-Legrand/Havells/HPL

S&F of MCB SPN 40 to 63 Amp 240 volt 10 KA all as specified. Make:-Legrand/Havells/HPL

S&F of MCB SPN 6 to 32 Amp 240 volt 10 KA all as specified. Make:-Legrand/Havells/HPL

S&F MCB SP 40 Amp to 63 Amp 10 KA.240 volts all as specified. Make:-Legrand/Havells/HPL

S&F MCB SP 6 Amp to 32 Amp 10 KA.240 volts all as specified. Make:-Legrand/Havells/HPL

S&F Metal clad enclosure with plug and socket 10 Amp with one MCB single pole, 16 Amps 240 volts. all as specified. Make:- Legrand/Havells/HPL

S&F Metal clad enclosure with plug and socket 20 Amp with one MCB single pole, 25 Amps 240 volts. all as specified. Make:-Legrand/Havells/HPL

S&F LED Tube Light of 18 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and conforming to the product Code LCTL-18-CDL of make Crompton or equivalent in make Havells/Phillips

S&F LED Tube Light of 20 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 16 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified product Code CAT NO-HLB-07-20-CW-IP of HALONIX or eqivalent in Make :-Havells/Phillips.

S&F of Endura Linear LED batten of 9 W (2 ft.),extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver in AC complete all as specified. Make: CG make cat part No. LCTL-9-CDL or equivalent in Havells/Phillips

S&F aesthetically designed circular shaped surface mounted LED light of 12 W fixture with PMMA diffuser to give glare free light including suitable LED lamp of 12 W having dimenstion dia of 300mm. AND height 92 mm conforming to the cat part no. LCDSPLN-R-12-CDL of make Crompton or Equivalent of Havells/Phillips

Supply and fix Metal clad plug top of capacity 20 Amp, 240 volts. Make :- Legrand/ Havells/ HPL

Supply and fix Metal clad socket of capacity 20 Amp, 240 volts. Make :- Legrand/ Havells/ HPL

Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 12'' including necessary cutting of sheet for fixing switch / socket complete as specified and directed.

Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 5'' including necessary cutting of sheet for fixing switch / socket complete as specified and directed.

Supply and fix only decorative laminated sheet 3mm thick of size 7'' X 4'' including necessary cutting of sheet for fixing switch / socket complete as specified and directed.

Supply and fix only fan capacitor of the following capacity :- (Make : Epcos/ Anchor)

Supply and fix only non metallic rigid PVC conduit medium grade 20 mm dia, ISI Mark complete all as specified and directed. Make : Kalinga premium/ supreme/ finolex

Taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to work shop and carrying out for rewinding, transportation to site, reinstallation and testing complete.

M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required.

All as per ser item No 49 but exhaust fan 230/300 mm sweep

All as per ser item No 49 but exhaust fan 400 mm sweep

S&F ceiling fan Ball bearing of suitable size & model (as per sample). Make:- NBC/ SKF

M&L for replacing U' clamps with rubber reel, bolts, nuts, washers and safety pin ceiling fan of any size/ make

M & L for Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white paint complete.

S &F of Canopy of Celing fans of 1200/1400mm swipe size heavy duty duly painted with one coat of white paint complete.

M&L for spray painting (white colour) with synthetic enamel paint to Ceiling fans/Exahust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge.

Taking down carefully Geysers 50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc.

Taking down carefully Geysers 25 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and fixing in position after carrying out repairs including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc.

M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge.

M & L heating element of 2.0 KW (Circular) as required at site including rubber washers (ISI marked) etc complete all as specified and directed (As per sample).

M & L heating element of 2.0 KW (Rectangle) as required at site including rubber washers (ISI marked) etc complete all as specified and directed Make Venus or As per sample.

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank.

S&F of storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank.

M&L for replacement of insulating material (Glass wool) for 25/ 50 litre capacity Geysers all as directed by Engineer -in - charge.

S&F base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample).

S&F base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample).

M&L chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed.

M&L PVC connection pipe 450mm long with two brass adopters washers and connecting up complete ISI mark all as specified and directed by Engr-in Charge

M&L safety nut for high pressure release (As per sample).

S&F non return valves 15mm dia and connecting up complete (ISI marked).as per sample

M&L top cover for geysers of 25/50 ltrs capacity any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) all as directed.

S&F bottom cover for geysers of 25/50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces all as specified and directed.

S&F of outer cover for geyser made out of MS sheet suitable for 50 ltrs capacity geyser vertical/horigontal type all as specified and directed.

S&F of outer cover for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horigontal type all as specified and directed.

S&F thermostat (ISI Marked) for 25/50 Liters capacity Geyser.Make : Daspass/Theeta/TTE

S&F indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample)

Supply and fix only mild steel hole fastner 10mm dia, 100mm long including nut and washer.

Supply and Fix only gun metal gate valve 15 mm bore, ISI marked with iron wheel head, screwed both ends for GI pipe complete. Make : Upadhyay/ Leader/ Zoloto

Supply and fixing MCCB, 4 pole, 415 volt of capacity 250 Amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. all as specified and directed by Engr-in-Charge Make : Legrands/Schnieder/L&T cat part No 4202 49

S & F of SFU(switched fuse unit) of 200 A current carrying capacity including 3 Nos of HRC fuse of 200A rating complete all as specified and directed by Engineer-in-charge. Make:-Havells/schneider/L&T.

S & F of Digital panel mount power meter for recording power complete all as specified and directed by Engineer-in-charge

S & F of indicator light 3 Nos in each set having three colours Red,Blue,Yellow complete all as specified and directed by Engineer-in-charge

NEERU ELECTRICALS

M/S MG GROUP

RUCHIKA ENGG.WORKS

GLIBS CONSTRUCTION

Surjit and Sons