REPAIRS MAINTENANCE OF WATER SUPPLY PUMPS CENTRIFUGAL, MONOBLOCK, VERTICAL AND HORIZONTAL SUBMERSIBLE PUMPS, SUBMERSIBLE CABLES, STARTERS, POWER FACTOR CORRECTION SWITCHGRARS, LEVEL INDICATORS, DOZING EQUIPMENTS, WATER TREATMENT CHEMICALS AND CERTAIN

Supply only Shaft Sleeve Suitable of capacity 10 HP Centrifugal Pump Set as per existing sample.

Supply Only oil seal suitable for Pump set upto Centrifugal Pump Sets of capacity 10 HP as per sample.

Supply Only Gland Plate with complete MS Nut & Bolt suitable for Centrifugal Pump Sets of capacity 10 HP as per sample

Supply only Lantern Ring suitable for Centrifugal Pump Sets of capacity 10 HP as per sample

Supply Only stamping core suitable for 10 HP motor

Supply Only rotor assembly suitable for 10 HP motor

Supply Only starter assembly suitable for 10 HP motor.

Supply only bearing plate suitable for 10 HP motor.

Supply Only main body cast iron suitable for 10 HP motor

Supply only Shaft Sleeve Suitable of capacity 20 HP Centrifugal Pump Set as per existing sample.

Supply Only oil seal suitable for Pump set upto Centrifugal Pump Sets of capacity 20 HP as per sample.

Supply Only Gland Plate with complete MS Nut & Bolt suitable for Centrifugal Pump Sets of capacity 20 HP as per sample

Supply only Lantern Ring suitable for Centrifugal Pump Sets of capacity 20 HP as per sample

Supply Only stamping core suitable for 20 HP motor

Supply Only rotor assembly suitable for 20 HP motor

Supply Only starter assembly suitable for 20 HP motor.

Supply only bearing plate suitable for 20 HP motor.

Supply Only terminal with cover suitable for 20 HP motor

Supply Only main body cast iron suitable for 20 HP motor

Supply only Shaft Sleeve Suitable of capacity 30 HP Centrifugal Pump Set as per existing sample.

Supply Only oil seal suitable for Pump set upto Centrifugal Pump Sets of capacity 30 HP as per sample.

Supply Only Gland Plate with complete MS Nut & Bolt suitable for Centrifugal Pump Sets of capacity 30 HP as per sample

Supply only Lantern Ring suitable for Centrifugal Pump Sets of capacity 30 HP as per sample

Supply Only stamping core suitable for 30 HP motor

Supply Only rotor assembly suitable for 30 HP motor

Supply Only starter assembly suitable for 30 HP motor.

Supply only bearing plate suitable for 30 HP motor.

Supply Only terminal with cover suitable for 30 HP motor

Supply Only main body cast iron suitable for 30 HP motor

Supply only Shaft Sleeve Suitable of capacity 20 HP Submersible Pump Set as per existing sample.

Supply only Oil Seal Suitable of capacity 20 HP Submersible Pump Set as per existing sample.

Supply only Gland Plate with complete MS Nut & Bolts Suitable of capacity 20HP Submersible Pump Set as per existing sample.

Supply only Shaft Sleeve Suitable of capacity 10 HP Submersible Pump Set as per existing sample.

Supply only Oil Seal Suitable of capacity 10 HP Submersible Pump Set as per existing sample.

Supply only Gland Plate with complete MS Nut & Bolts Suitable of capacity 10HP Submersible Pump Set as per existing sample.

M&L for Re-winding of 3 phase submersible / centrifugal pump set motor of any capacity & any make by removing burnt copper winding and rewinding with supper enamelled copper winding wire of suitable gauge as per existing size and number of turns, providing insulating materials such as nylon tape, varnishing and baking testing and commissioning, complete all as specified and as directed.

Dismantling and taking out submersible pump set of any type / size from deep bore well/open well up to 100 metre depth and dismantling of bowl assembly of any type / size and cleaning, descaling, painting inner/ outer to anticorrosive paint and reassembling after necessary repair /overhauling and lowering making proper alignment and connecting to water source , testing and commissioning for available yield for the entire satisfaction of EIC, complete all as specified and as directed.

Supply only high strength calcium chlorine based (65%) granules disinfectant powder in container for chlorination of water, complete all as specified and as directed. Make: RMCO Aquafit / ALTOCH CH/ POTTER & WATTS/ BRIO ZING Note: The Contractor shall submit original Paid Vouchers and Test Certificates against each lot of delivery. The test reports shall be certified by the All India Institute of Hygenic & Public Health New Delhi against each lot of delivery.

Supply only Crystal alum of best quality, complete all as specified. Note: Receipt Voucher & Issue Voucher (baby indent) shall be maintained duly signed by executives and user concerned.

S&F IN REPAIR MCCB 4Pole, 415Volt, 400Amp, breaking capacity 36kA, adjustable type with O/L, S/C & E/F protection, Icu = 100%, with spreader links, phase barriers and necessary connecting up in DB, testing and commissioning, with and including taking down old u/s MCCB of any type, complete all as specified and as directed.

All as per Serial Item No. 45 here in before but for MCCB of 200Amp capacity 36KA

All as per Serial Item No. 45 here in before but for MCCB of 160Amp capacity 36KA

All as per Serial Item No. 45 here in before but for MCCB of 125Amp capacity and breaking capacity 16kA.

All as per Serial Item No. 45 here in before but for MCCB of 63/100Amp capacity and breaking capacity 16kA.

S&F IN REPAIR MCB TP 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, with and including taking down old u/s MCB of any type, complete all as specified and as directed.

All as per Serial Item No. 50 here in before but for MCB SPN 40 to 63Amp capacity.

All as per Serial Item No. 50 here in before but for MCB SPN 32Amp capacity.

All as per Serial Item No. 50 here in before but for MCB SP 6-32Amp capacity.

S&F IN REPAIR Power Contactor MNX-18, TP, 18Amp, 415Volt of coil voltage 220Volt with aux contact 1 No, with and including taking down old u/s contactor Part No CS 94100, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-22, TP, 22Amp, 415Volt of coil voltage 220Volt with aux contact 1 No, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-32, TP, 32Amp, 415Volt of coil voltage 220Volt with aux contact 1 No, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-40, TP, 40Amp, 415Volt of coil voltage 220Volt with aux contact 1 No, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-50, TP, 50Amp, 415Volt of coil voltage 220Volt with aux contact 2 No+2NC, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Power Contactor MNX-70, TP, 70Amp, 415Volt of coil voltage 220Volt with aux contact 2No+2NC, with and including taking down old u/s contactor Part No CS 94980, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-9, for MNX contactor, delay range 1.4 to 2.3Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-18, for MNX contactor, delay range 3 to 5Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-22, for MNX contactor, delay range 4 to 7.5Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-25, for MNX contactor, delay range 6 to 10Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-32, for MNX contactor, delay range 9 to 15Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Bimetal Overload Relay type MNX-40, for MNX contactor, delay range 14 to 23Amp, with and including taking down old u/s overload relay, complete all as specified and as directed.

S&F IN REPAIR Single Phase Preventer suitable for 380Volt, AC, with and including taking down old u/s single phase preventer, complete all as specified and as directed.

Supply, laying, testing and commissioning of PVC insulated and PVC sheathed Flat industrial cable of size 3.0core x 16.0Sqmm, with stranded copper conductor, 1100 volts grade, conforming to IS 694, suitable for submersible pumps with and including cable glands, ferrules and connected accessories, including taking down old u/s cable, complete all as specified.

Supply, laying, testing and commissioning of PVC insulated and PVC sheathed Flat industrial cable of size 4.0core x 10.0Sqmm, with stranded copper conductor, 1100 volts grade, conforming to IS 694, suitable for submersible pumps with and including cable glands, ferrules and connected accessories, including taking down old u/s cable, complete all as specified.

Supply, laying, testing and commissioning of PVC insulated and PVC sheathed Flat industrial cable of size 4.0core x 6.0Sqmm, with stranded copper conductor, 1100 volts grade, conforming to IS 694, suitable for submersible pumps with and including cable glands, ferrules and connected accessories, including taking down old u/s cable, complete all as specified.

S&F IN REPAIR Star Delta starter, fully automatic with single phase preventer suitable for 3 Phase electric driven pump set of 30HP capacity of existing make & model, with and including taking down old u/s star delta starter of any description, complete all as specified.

S&F IN REPAIR Star Delta starter, fully automatic with single phase preventer suitable for 3 Phase electric driven pump set of 17.5HP capacity of existing make & model, with and including taking down old u/s star delta starter of any description, complete all as specified.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type soil, for foundation etc., or for laying of cable/ GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in any type of soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

S&F IN REPAIR for Supply, assembly, erection, testing and commissioning of Automatic power factor correction panel of capacity 15 KVAR in 4 stages with micro processor based, Indoor type, floor mounted free standing, dust and vermin proof panel with IP-42 protection, CPRI approved ISO 9001 certified, frame fabricated out of 40mm x 40mm x 4mm angle iron, 2mm thick CRCA sheet for entire outer panel with single door and locking arrangements & 1.6mm for inner compartment with 40mmx4mm flat Iron, MS surfaces epoxy based powder coated, shade as approved over 2 coats of red oxide primer, surfaces pre-treated in seven tank process for de-greasing, de-rusting and Phosphated, Panel / DB having front and rear opening for installation of separate cable alleys, busbar chamber and switchgear compartments,

S&F Push button with LED Indicator - 240 V A.C, colour / Red / yellow / Green, with and including taking down old u/s push button, complete all as specified and as directed.

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 3.5core x 35.0Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work, brick protection & sand cushioning shall be measured and paid separately under respective items.

Supply, installation,testing and commissioning Pump starter panel, outdoor type cubical panel board,) made out of 3.15 mm thick CRCA sheet, duly powder coated, compartmental design with locking arrangements, weather and vermin proof with proper ventilation slots, IP 54 free standing floor mounted with AL busbar of suitable size for phase and neutral mounted on hygroscopic insulators all as specified and directed by Engineer-in-Charge & comprising of the following:- INCOMER i) MCCB TP 63 A, incomer, 415V, 50Hz, 16 KA - 01 No. OUTGOING i) MCB TP 40 A, 415V, 16 KA - 02 Nos. ii) FASD starter suitable for 15 HP pump-02 nos iii) MCB 4 pole 32 A, 415V, 16 KA - 02 No. (spare) iv) Single phase preventor v) overload relay protection BUSBAR 100 A rated AL bus bar with colour coded heat shrinkable sleeve METERING & INDICATION i) Ammeter,0-400A, Digital type, with suitable CTs - 01 set ii) Voltmeter, 0-500V, Digital type - 01 No. iii) R-Y-B phase indicating lamp- 01 set iv) Internal wiring with suitable size of PVC insulated stranded copper conductor duly crimped with copper lugs ferruled.

S&F Exhaust fan, steel body, AC single phase, 230Volt, 250mm sweep, light duty with blades, frame, louvers, wiremesh with all accessories and necessary fixing details, including taking down existing u/s exhaust fan and depositing to AGE E/M Store yard, complete all as specified and as directed.

S&F IN REPAIR LED Indicator lamp (RED / YELLOW/BLUE), input voltage range 220-240V, AC, complete all as specified.

S&F IN REPAIR FRLS cable tray of size 120mm B type, with cover for fixing XLPE cables at various places to accommodate the cables, fixed with necessary bends, angles, supports for fixing etc., complete all as specified and as directed.

Supply, laying, testing and commissioning of chemical dosing pump system electromagnetic, diaphragm type with accessories like foot valve, NRV, suction and discharge tube and capacity of 6 lph / 10 kgs pressure with and including Dosing system of 100 litres capacity FRP solution preparation cum settling tank fitted with lid, inlet/ outlet connection, sludge deposition facility and SS 316 agitator, with and including taking down old u/s dosing pump & system, complete all as specified and directed. Make of Dosing Pump- RMCO model RC -13 and Dosing system: RMCO model CDS -100 or equivalent in make specified here in after.

M&L for Rolled mild steel framed work, as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, slice valve pit cover and frame, sheet, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing confirming to Fe 290 E -165, with and including dismantling old steel work of any description, complete all as specified and as directed.

M&L for Applying one coat synthetic enamel paint with and including preparation old steel surface of the entire Pumps and motor after scraping /removing the existing paint/rust /dirt on the surface pipe and marking the water flow direction on pipe by Blue paint, complete all as specified and directed.

Please Enable Macros to View BoQ information