ADDN/ ALTN CUM SPECIAL REPAIRS TO OFFICERS MARRIED ACCN (MAJ TO BRIG) AT DIPATOLI STATION

Amount

Demolition of brick work built in cement mortar or lime mortar of any description complete all as directed.

M&L Brick work with flyash bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as directed.

M&L Brick work with flyash bricks, straight or curved on plan to any radius in half thick brick walls, built in cement mortar 1:4 complete all as directed.

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc, complete all as directed.

M & L for rendering 15 mm thick in cement Mortar (1:4) on the external surfaces fair faces of brick work/concrete and finished the surface even and smooth using water proofing compound (WPC) as per manufacturer instruction complete all as directed. (NOTE: WPC shall be measured and paid separately)

M & L for rendering 15 mm thick in cement Mortar (1:6) on the internal surfaces fair faces of brick work/concrete/ and finished the surface even and smooth without using extra cement complete all as directed.

M & L for rendering 5 mm thick in cement Mortar (1:3) on the surfaces of ceiliing/ chajjas and all concrete surfaces exposed to view using water proofing compound (WPC) as per manufacturer instruction and finished the surface even and smooth without using extra cement complete all as directed. (NOTE : WPC shall be measured and paid separately)

M&L complete removal of existing treatment on wall surfaces, complete all as directed.

M & L for preparing old surfaces and applying one coat of OBD of white or tinted on walls complete all as directed.

M&L preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty minimum 1 mm thick to make the surfaces truly smooth, complete all as directed.

M&L preparing surfaces and applying two coats of distemper oil emulsion on wall complete all as directed.

M & L preparation of surface and finishing walls with acrylic smooth exterior paint of required shade complete new work (two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm) complete all as directed.

M & L preparation of surface and finishing walls with acrylic smooth exterior paint of required shade complete old work (two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as directed.

M&L preparation of old plastered surfaces and applying two coats of white wash on wall surfaces complete all as directed

M &L for preparation of old plastered surface and applying two coats of white wash on ceiling surfaces complete all as directed

Dismantling floor, hearth or wall tiling including cement mortar ,beding layer complete all as directed.

M&L for coloured glazed ceramic tiles in vertical surface 600x300x 7 mm thick over and including 10 mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry & pointed in white or coloured cement to match the existing surfaces, complete all as directed

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as directed.

M & L double charged vitrified tiles 600x600mm, glossy finish (light shade 8-10 mm thick (square / rectangular ),as in floor etc set and jointed, joint free and pointed in white or coloured cement to match the existing surfaces, including 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to receive tiles of approved shade & colour complete all as directed

M& L double charged vitrified tiles 600x600mm, glossy finish (light shade 8-10 mm thick square / rectangular ) , as in dado / skirting etc set and jointed, joint free and pointed in white or coloured cement to match the existing surfaces , including 10mm thick rendering in cement mortar 1:4 finished rough to receive tiles complete all as directed.

M&L Granite 18 - 20mm thick (of any type) work (table rubbed and polished) in window cills, cooking platforms and including 20mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the existing surfaces with shade of granite complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position, complete all as directed

M&L for water proofing treatment to sunken surface of floor slab/skirting/ dado in following sequence:-

M & L for plain cement concrete padding 1:2:4 Type B0 (using 12.50mm graded stone aggregate) with integral water proofing compound, complete all as directed. Note : WPC shall be measured and paid seperately.

M & L for floor / vertical skirting side plaster in CM 1:3, 15mm thick with and including using " Pidicrete URP" manufactured by Dr Fixit or equivalent of Sika/Fosroc as per manufacturer instruction, complete all as directed

M & L for applications of two coats of proof coat black manufactured by Dr Fixit or equivalent of Sika/Fosroc as per manufacturers instructions all over and testing for water tightness by ponding of water for 72 Hrs, complete all as directed.

M&L for cement concrete Type E-2 1:5:10 (using 40mm graded brick aggregate) in foundations, filling and mass concrete,complete all as directed

S&F wall hung extended EWC with premium quality anti bacterial PVC flushing cistern 8.5 litre capacity having a one touch side push smooth operation , suitable with wall mount western toilet seats, Complete all as directed.

S&F chromium plated health faucet with 1 m long pipe complete all as directed

Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as directed

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls excluding clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as directed

S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 75mm bore of pipe Including bolts and nuts and securing ends of stays to wall or roof, complete all as directed

S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 100mm bore of pipe Including bolts and nuts and securing ends of stays to wall or roof, complete all as directed

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints,laid in trenches or in floors or wall complete all as directed

M&L PVC (SWR) bend /reducer any radius 110mm dia complete all as directed

M&L PVC (SWR) bend / reducer any radius 75mm dia complete all as directed

M&L PVC(SWR) Tee any radius 110mm bore complete all as directed

M&L PVC(SWR) Tee any radius 75mm bore complete all as directed

M&L PVC(SWR) Vent cowl 110mm bore complete all as directed

S&F 75mm bore branch piece, single (equal or unequal) , ordinary or inverted, spigot or socket type or with parallel branches complete all as directed

S&F 100mm bore branch piece, single (equal or unequal) , ordinary or inverted, spigot or socket type or with parallel branches complete all as directed

S&F in repair chromium plated toilet paper holder size 150 x150mm complete all as directed

S&F in repairs PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity including flush pipe of 32mm bore complete all as directed

S&F in repairs under counter shunk wash hand basin, white of size 550x 400mm (excluding taps) incl CP waste coupling & PVC waste pipe and brackets complete all as directed.

S&F in repar vitreous China squatting pattern water closet 'orissa pattern ' size 580 x 440 mm white with integrated foot rests complete all as directed

Taking up or down steel tubing and connection of 15 mm bore complete all as directed

Taking up or down steel tubing and connection of 20 mm bore complete all as directed

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth complete all as directed

M&L for 20mm dia CPVC pipe SDR 11 with all fitting and fixed complete to walls and ceiling or laid in floor complete all as directed.

M&L for 25mm dia CPVC pipe SDR 11 with all fitting and fixed complete to walls and ceiling or laid in floor complete all as directed.

S&F in repair CPVC gate valve screwed down high pressure with crutch or butterfly handle, screwed both ends for CPVC pipe or for unions and fixed of size 25 mm bore complete all as directed.

S&F in repair Angle valve/ stop valve, cast copper alloy fancy type chromium plated with screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore complete all as directed.

S & F in repair brass chromium plated mixer 15mm bore for mixing hot and cold water for walls or basins for iron pipe complete all as directed.

S&F in repairs 15mm bore Bib taps fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as directed

S&F in repairs Brass Chromium plated shower rose 125mm size with or without swivel joints with 225mm arm of any size including fixing to steel pipe or union incl shower. complete all as directed

S&F in repair Brass chromium plated tubular towel rail 18-20mm dia,D type, 60 cm long between flanges complete all as directed

Dismantalling of existing water tanks and removing to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) triple layers, hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as directed

Dismantalling of existing water tanks and removing to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) triple layers ,hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as directed

M &L for taking down shutter exc. 1 sqm and not exc. 2 sqm resecuring or easing and refixing in same opening complete all as directed

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all as directed

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) exc 1.50 Sqm but n exc 4 Sqm each complete all as directed

Taking down shutters area n exc 1.0 Sqm each complete all as directed

Taking down shutters area exc 1.0 Sqm but n.exc 2.0 sqm each complete all as directed

Dismantling of existing structural steel work including doors, windows,gates but excluding framed truss etc complete all as directed

M&L Pressed steel frames for doors (125X60MM) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as directed

M&L cement concrete type C-0,1:3:6 (using 12.50 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as directed

S&F 40 mm thick flush shutter , solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as directed.

S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided into squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube fixing in opening complete all as directed

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement and fixing in the frame st site ( Details shall be refered at section 8 of SSR part-I) complete all as directed

S & F powder coated anodised aluminium (minimum thickness of coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc,complete all as directed

S&F powder coated anodized aluminum (minimum thickness of coating 50 micron) window 3 (three) shutter sliding type weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws including necessary locking arrangement and handle etc, complete all as directed. Note: (i) Glass and wire mesh shall be measured and paid separately. (ii) All three shutters shall be considered as one unit and only opening shall be measured.

S&F powder coated anodized aluminum(minimum thickness of coating 50 micron) ventilator louver type weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws including necessary handle etc, complete all as directed. Note: (i) Glass shall be measured and paid separately.

S&F Aluminimum anodised barrel tower bolt of extruded section 150mm long , complete all as directed

S&F Aluminum handle cast type anodized size 150 mm long, complete all as directed

S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as directed

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size complete all as directed

S/F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) complete all as directed

S/F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) complete all as directed

S&F in repair Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as directed

S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as directed

S&F framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290 complete all as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel staples, complete all as directed

S&F in repair Galvanized Mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel staples, complete all as directed

S&F sheet glass ordinary quality 5.00 mm thick exc 0.5 sqm in each pane,complete all as directed

S&F figured glass pin head type 4.0 mm thick not exc 0.5 sqm in each pane, complete all as directed

M&L cement concrete type B1,1:2:4 (using 20 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as directed

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces complete all as directed

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a coat of pink primer over 10cm width or girth complete all as directed

M & L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as directed

S&F in repairs curtain rod 20 mm dia, mild steel, chromium plated including with fixing brackets, decorative type end cap etc, complete all as directed

S&F in repair 18-19 mm thick plywood (BWP grade) laminated with high glossy finish sunmica 1mm thick (colour approved by GE) all sides excluding hinge side, including 5mm wooden leaping bead (at hinge side) for cupboards, kitchen cabinet shutters etc. complete all as directed

S & F in repair 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as directed

S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as directed

S&F stainless steel slip on soft closing concealed hinges for cabinate doors, smooth operating hinges for full overlay doors and windows complete all as directed.

S&F 400mmx500mm PVC cabinet mirror fixed with chromium plated brass screws and cup washers , complete all as directed

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed

S&F in repair chromium plated soap dish (size not less than 100mm) , complete all as directed

Removing all existing old treatment over RCC roof or taking down cement plaster including racking out joints, hacking for key, scrubing down with water complete all as directed

M & L for brushing net cement slurry @ 3 Kg / Sqm on roof slab complete all as directed

M & L 15mm thick plaster fair finished using cement mortar 1:4 with WPC (as per manufacturer instruction) on roof slab complete all as directed. Note : WPC shall be measured and paid seperately)

M & L oil based bitumen primer @ 0.3 L/Sqm on plaster surface complete all as directed

M & L APP modified membrane 3mm thick minimum weight 3.6kg/Sqm for water proofing of roof sealing with torch application minimum100mm overlaping provided complete all as directed

M & L two coats of alumunium paint over bituminous surface of membrane complete all as directed

M & L demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs n.exc.200mm thick in rough finished surfaces complete all as directed

M&L for RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns etc complete all as directed

M&L for RCC (1:2:4) type B-1 using 20mm graded stone aggregates as chajjas etc complete all as directed

M&L for TMT bar 6-8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. or securing with clips complete all as directed

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed

Supply only integral water proofing compound complete all as directed

M & L preparation of new steel surfaces of any description over 10 cms in width or girth not otherwise described and apply two coat of synthetic enameled paint over a coat of red oxide zinc chrome primer complete all as directed

S & F kitchen sinks with drainage board made of stainless steel 1mm thick kitchen/ laboratory with plugs, washers, wastes, incl. beding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mmx 460mm, bowl size 410mmx330mmx160mm complete all as directed

S&F utensil rack / Kitchen rack of stainless steel size 24 inch x 30 inch x 10 inch made of 0.6mm thick stainless steel sheet complete all as directed.

S&F sheet glass ordinary quality 3 mm thick including Putty exc 0.5 sqm in each pane, complete all as directed.

M&L PVC nahani trap 110 mm bore complete all as directed

M&L PVC 'P' trap 110 mm bore complete all as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting for taking credit and making good distrubed surfaces of walls, floors etc complete all as directed.

Taking down old unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as directed

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors ,roofs etc complete all as directed

Taking down existing geyser of any capacity after disconnecting all necessary electrical connection and water supply connection and deposited to store yard of AGE E/M Dipatoli complete all as directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Dipatoli complete all as directed

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M Dipatoli complete all as directed

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), PVC insulated and unsheathed FRLSH cable 1100 volt grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of size 20 mm dia white/ ivory colour including all accessories after chasing in wall/ceiling etc heavy duty ISI marked, including PVC multistranded conductor 1.5 sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as directed. Note: GI modular box modular cover plate with frame shall be measure and paid separately.

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One light point controlled by one, two way switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One bell point controlled by one, bell switch 5 Amps

Description all as per item No 122 here in before but using 2.5 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as directed

Description all as per item No. 122 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for power point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common earth dolly (for AC Point) complete all as directed

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as directed.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as directed

S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as directed.

S & F for for Bell push modular 6 Amps single module complete all as directed.

S & F modular metal (GI) flush box with modular white cover plate with frame for following modules :-

02 modules

03 modules

04 modules

06 modules

08 modules

S & F blanking plate for modular board complete all as directed.

S & F for lamp holder , PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as directed

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as directed

S & F for Modular type TV Socket out let complete all as specified and as directed.

S&F Electronic meters temper proof LCD display with polycarbonate cover 230 V , 10-60 Amp, accuracy class- I 50 Hz, conforming to IS 1379, IP- 54 with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as directed

Repair, Painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat of white synthetic enamel paint after cleaning all dust etc and hanging of ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed

S&F electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV connection pipe etc complete all as directed

S & F for sheet metal enclosure MCCB VTPN DB 4 Way Vertical type with 200 Amps rated bus bar 415 volts Double Door with magnitic locking system including necessary provision for inserting MCCB as Incomer and fixing the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as directed

S & F in replacement of MCCB 4P, 125 A, 415V, 16KA fixing in DBs, connecting with bottle type copper thimbles complete all as directed

M & L for Sub main wiring with approved colour coding as per IS with multi stranded copper cable PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of size 25 mm dia of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) multistranded copper conductor FRLSH cable as earth wire complete all as directed. Note:- Two runs of 6 sqmm cable for phase and neutral and one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

S&F in replacement of sheet metal enclosure MCB SPN DB 12 Way type 240 volts Double Door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary and making good of distrubed surface to match with existing colour of wall complete all as directed

S & F in replacement of 240V, 10KA MCB SPN 40 Amps "C" Series fixing in DBs, connecting with bottle type copper thimbles complete all as directed

S&F MCB SP( 6 to 32) Amp 240 volt 'C' curve complete all as directed

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps complete all as directed.

S & F for Highly efficient LED Bulbs, 9 W, used as a ready replacement for existing Old UNSV bulb lamp complete all as directed

S & F for LED Mirror light 9 watts batten aluminium extruded with decorative end caps complete all as directed

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as directed

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen output box type fitting, 230 volts complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed

S&F for energy efficient exhaust fan of 300 mm sweep, 1200 RPM made of steel body with louver shutter ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as directed. Note:- Cost of suitable opening wall for flxing exhaust fan is deemed to be included in overall rate quoted.

S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, 230 V, 50 Hz, 1200 RPM , copper winding fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as directed

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as directed

M&L for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick, buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connecting to galvanised earth wire 4.0 sqmm dia (up to 7.5 mtr length ) and GI pipe 15 mm light grade for protection of GI earth upto 7.5 mtr wire by means of bolts, nuts, check nuts and washers of galvanised iron including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric of weight not less than 4 kg / sqm funnel with GI watering pipe of 20 mm bore medium grade all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion including removal of old existing earth plates complete all as directed.

S&F iron body box mounting on wall surface powder coated suitable for arrangement of four single phase electric meter with door locking arrangement complete all as directed.

S&F in replacement of 240 V, 10 KA MCB DP 63 Amps C series fixing in DBs, connecting with bottle type copper thimble complete all as directed.

Supply , laying on replacment , connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor complete cable all as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles / stays and struts etc and getting out complete all as directed.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as directed.

Returning filing in including spearing, leveling watering and well ramming in layers not exc 25cm thick complete all as directed.

Supply and spread dry river sand for cable cushioning in trenches complete all as directed. Note :- Punned down thickness shall be considered for measurement.

Supply and laying burnt bricks sub glass 'B' old size laid dry in trenches across the cable protection complete all as directed.

S&F GI pipe light grade 50mm bore for cable protection/connection at electric pole and at DBs complete all as directed.

S&F in replacement of sheet metal enclosure MCB SPN DB 4 Way type 240 volts Double Door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as directed

Ranchi Construction Company (BID ID -3234667)

M/s Ray construction (BID ID -3239459)