Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹21.8 Cr
EMD Value
₹12.4 L
Closing Date
13 Mar 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
SR DEN SE
17 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(Placed at Page No.35 of tender form and document attached), along with copies of Audited Balance Sheets and Profit and Loss statement duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
For details refer attached documents
(a)The tenderer must have successfully completed or substantially completed (For more details refer attached documents), any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. (For more details refer attached documents).
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
For more details refer attached documents
Defination of Similar Work :- Any type of civil engineering work involving construction of Tunnels/Bridges/Extension of tunnel porting/lining of tunnel/short creating/rock bolting of cutting/Canadian fencing/Rock fall barrier or major rehabilitation of bridges by jacketing/extension of barrel length/rebuilding of steel bridges by psc slab or steel superstructures etc. for Railways.
17 conditions · 5 needing a document upload
For tenders having advertised value more than Rs 20 crore wherein eligibility criteria includes bid capacity also, the tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of the present tender.The available bid capacity shall be calculated as under: Available Bid Capacity = [A x N x 2] - 0.33x Nx B Where, A =Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender), taking into account the completed as well as works in progress. N= Number of years prescribed for completion of work for which bids has been invited. B = Exiting commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started upto the date of inviting the tender. Note: (a) The Tenderer(s) shall furnish the details of - (i) Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) for calculating A, and (ii) Existing commitments and balance amount of ongoing works with tenderer as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to tenderer but yet not started upto the date of inviting of tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant. (b) In case if a bidder is JV, the tenderer(s) must furnish the details of (i) Maximum value of construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) by each member of JV for calculating A, and (ii) Existing commitments and balance amount of ongoing works with each member of JV either in individual capacity or as a member of other JV as per the prescribed proforma of Railway for statement of all works in progress and also the works which are awarded to each member of JV either in individual capacity or as a member of other JV but yet not started upto the date of inviting of tender for calculating B. In case of no works in hand, a 'NIL' statement should be furnished. The submitted details for (i) and (ii) above should be duly verified by Chartered Accountant. (c) Value of a completed work/work in progress/work awarded but yet not started for a Member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above mentioned bid capacity in the tender under consideration. (d) The arithmetic sum of individual "bid capacity" of all the members shall be taken as JV's "bid capacity". (e) In case, the tenderer/s failed to submit the above statement along with offer, their/his offer shall be considered as incomplete and will be rejected summarily. (f) The available bid capacity of tenderer shall be assessed based on the details submitted by the tenderer. In case, the available bid capacity is lesser than estimated cost of work put to tender, his offer shall not be considered even if he has been found eligible in other eligibility criteria/tender requirement.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents.
The Bank Guarantee bond shall be as per Annexure- VIA (Placed at Page No. 35-36 of tender form), and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i).A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii).The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. .(i.e. excluding the last date of submission of bids) (iii).Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv).The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v).The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii).The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii).If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should mandatory submit documentary proof as per the attached checklist document.
Tenderers are abiding by the General Conditions of Contract (GCC) April 2022 & any statutory modification thereof and also abide to carry out the work accordingly.
Documentary proof - Tenderer should submit scanned copy documentary proof in regard for fulfilling the Technical /financial eligibility criteria along-with their offer (for details refer attached documents). If the tenderers do not submit any proof of meeting with the eligibility criteria as laid down in the tender conditions, the offer shall be considered as incomplete and shall be summarily rejected. Documents submitted in support of eligibility criteria after opening of tender will not be considered.
Document attached - Tender form
Maintenance period for this tender is 12 Months.
KJT-LNL:Provision of Dynamic Rockfall Barrier of capacity 5000kJ & Boulder netting at various vulnerable locations on Hill above tunnel portals & approaches between KAD-TKW MID line & MHLC-JBC UP line in SE ghat section.
CR-DRMWBB-2026-08--03~CR
CR-DRMWBB-2026-08--03
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹12.4 L
13 Mar 2026
12 Feb 2026
27 Feb 2026
27 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 21,83,02,658.6 | ||
| — | 610.00 | — | — | ||
| Providing and fixing ETAG CERTIFIED Class A Dynamic Rockfall Barrier composed of system comprising of steel meshes and cables coated in Zn-Al 5% class A(EN 10244-2, EN 10264-2), 5000KJ capacity, 5m height, residual height more than 60% consisting of post, anchors, cables anchors, cables/support ropes, clamps, retention panels etc. complete with post to post distance of 10m and energy dissipation by deformation of energy dissipaters, etc. complete, and as per technical specifications and as directed by Engineer in charge.(Note: i)Height of Rockfall barrier shall be read as 6M as ETAG certified barrier of 500KJ is available in 6M height. ii) 10% extra length of Rockfall barrier shall be supplied with each lot by contractor at its own cost for testing of individual components in lab, repair and maintenance of Rockfall barrier.) | — | — | — | 13,29,38,678.6 | |
| — | 11700.00 | — | — | ||
| Providing and fixing 300mm*300mm size rhomboidal shaped cable panel/mesh made of 10mm dia zinc alloy coated steel wire rope with suitable connection with minimum tare resistance of 15 KN and tensile strength of rhomboidal cable Punch strength of rhomboidal cable panel/mesh :370KN/m with displacement less rhomboidal cable panel/mesh shall be made of a single cable including top and botton support rope, lacing wire or rope required to connect the nets and all the accessories such as U clamps, turnbuckles, thimbles,including safety all other ancillary works,material machinery, labour etc complete as per technical specification as directed by Engineer in charge. | — | — | — | 1,85,44,500 | |
| — | 10100.00 | — | — | ||
| Providing and fixing double twisted hexagonal shaped interlaced zinc alloy coated steel wire grid/mesh with 8mm steel wire rope in longitudinal direction, top support rope, botton support rope, lacing wire, Uclamps, thimbles, turn buckles with all other accessories including loading and unloading of material (mesh wie diameter not less than 3.55mm with zinc and PVC coating) including safety, all other ancillary works and materials, labour,etc. complete as per technical specification and as directed Engineer in and as directed Engineer in Charge. | — | — | — | 2,38,36,000 | |
| — | 3500.00 | — | — | ||
| Providing and spreading 8*10 woven hexagonal grid/mesh of high strength steel wire with class A zinc alloy coat and dia 2.7 mm, Longitudinally weaved with steel cable grade 1770 Mpa, having a dia of 8 mm (specification as per IRC SR 23) meeting the following minimum requirement: Longitudinal tensile strength: 170 KN/m, puncture resistance: 140 KN with maximum displacement of 450 mm including top and bottom support rope, lacing wire, or rope required to connect the nets and all the accessories such as U-clamps, turn buckles, thimbles, including safety all other ancillary works, material machinery, labour, etc. with all leads and lifts and as per technical specification attached and as directed by Engineer in-Charge. | — | — | — | 1,06,22,500 | |
| — | 53.20 | — | — | ||
| Manufacturing, supplying and fixing of rock bolts of diameter and lengths as approved by engineer including all concerned items of work such as drilling of holes in rock, driving the bolts, provision of capsules as per technical specifications, washer threading splitting, cutting of bolts etc complete (all labour and materials shall be provided by the contractor at his cost) fully with contractor Note:- Rock bolts of size 25mm/ 32mm/ any other size as approved by engineer as per drawing drawings. | — | — | — | 1,29,27,600 | |
| — | 8968.00 | — | — | ||
| Scaling and removal of loose rock including stacking of boulders at bottom of slope and disposal at a dumping place within 3 kms from the site as directed, including all material, labour machinery etc complete and as directed as per by Engineer in charge. | — | — | — | 1,78,01,480 | |
| — | 50.00 | — | — | ||
| Removal of hanging rock mass from the slope by mechanical means, cutting the same into small size, guiding the mass to bottom with site speicific and suitable materials, stacking the same at the bottom of slope and disposal at dumping place within 3 kms from the site as directed, including all material, labour machinery, etc. complete and as directed as per by the Engineer-in-Charge. | — | — | — | 1,35,500 | |
| — | 8450.00 | — | — | ||
| Removal of Vegetation, bushes, shrubs in lower and upper sections including stacking of useful material, disposing of material from hill slope with all leads and lifts as directed by Engineer-in- charge. | — | — | — | 11,15,400 | |
| — | 50.00 | — | — | ||
| Excavation for gutter in hard rock by wedging and chiselling or line drilling including dressing section to the required grade and sides slopes for gutters and conveying the excavated materials below the hill and disposing off at suitable place with all leads and lifts in the hills as directed by Engineer-in-charge. | — | — | — | 79,250 | |
| — | 50.00 | — | — | ||
| Excavation for gutter in soft rock by wedging and chiselling or line drilling including dressing section to the required grade and sides slopes for gutters and conveying the excavated materials below the hill and disposing off at suitable place with all leads and lifts in the hills as directed by Engineer-in-charge. | — | — | — | 56,250 | |
| — | 50.00 | — | — | ||
| Excavation for gutters in hard murum with boulders by including dressing section to the required grade and side slopes for gutters and conveying the excavated materials below the hill and disposing off at suitable place with all leads and lifts in the hills as directed by Engineer-in- charge. | — | — | — | 43,000 | |
| — | 50.00 | — | — | ||
| Excavation for gutters in soft murum/ lateritic soil/ sands by including dressing section to the required grade and side slopes for gutters and conveying the excavated materials below the hill and disposing off at suitable place with all leads and lifts in the hills as directed by Engineer-in-charge. | — | — | — | 43,000 | |
| — | 50.00 | — | — | ||
| Conducting aerial survey of KJT-LNL SE ghat section along all three lines using unmanned aerial vehicle (drone) which includes raw data capture using multi rotor UAV system, data processing for ortho photo, DSM, Counter map and 3D model generation, identification and locating of possible loose boulders, unusual, any settlement at the toe of high bank and submission of detailed report. (3cm GSD) | — | — | — | 1,59,500 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .