Erection Street poles with Energy Efficients LED Street Lights at Gokul road Median Hubli Division

Erection Street poles with Energy Efficients LED Street Lights at Gokul road Median Hubli Division

1.4.1 In all kinds of soils Depth upto 1.5 m Earth work excavation for Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Build...

Base Concerete 2.1.1 Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates PCC Dimension =0.4mX0.4mX0.1m=0.016Cum .Providing and laying in position Cement Concrete for levelling course ...

2.11 h. All other type of structures for TMT Steel Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cut...

Concerete 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in Cement Concrete for all

Basement & surface level works, return walls,

retaining walls, ...

SupplyinganddrawingFlexibleMulticoreCablemanufacturedwithelectrolyticgradeflexiblecopperwithlowconductorconfirmingtoIS81301984and(Virgin)PVCinsulationsheathedsuitableforworking vol...

5.18.4 6-32 A DP MCB Switch Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with...

1.6.1) Ordinary Soil Digging of Pit for providing GI Pipe type Earthing

Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approve...

Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sq mm

1.17.1 All kinds of soils. Depth upto 1.50 m Earth work excavation for Cables Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifi...

32.05) 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) UG Cable Basic Rate:141842 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per...

32.07) 25 Sqmm, 3.5 Core, (12 GI Strips - 4 x 0.8 mm) UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1...

66.05) HDPE/PLB Pipe 40/33 mm

Pot Head Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV. 35.01) Up ...

Pipe type earthing for each street light box 51.01) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

51.02) Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

51.03) Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

21.06) 35 to 95 Sqmm Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

9.03 upto 8 Ways (MS Enclosure) LT Feeder piller box (MS & Thermoset Plastic Enclosure) including necessary civil works like soil excavation & concreting etc. complete

30.01) 8 Way LT Feeder Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2(Refer Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)

32.11) 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm)1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring st...

59.03 50 Sqmm Copper Terminal, Apprx Wt: 26 Gm Apprx Wt: 58 Gm Heavy Duty Copper Terminal Long Barrel

59.01) 25 Sqmm Copper Terminal, Apprx Wt: 11 Gm Heavy Duty Copper Terminal Long Barrel

63.01) 25 mm Brass Cable Gland

4.2.6) 8 m - Top 70 mm and Bottom 135 mm dia Octagonal Poles Fabricating,supplyinganderectionof.mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewi...

13.4.4 Double bracket 2x1.5 m. Length LengthSupplyingandfixingtelescopicM.S.bracketfabricatedbyusing0.5mlength4"diatelescopicM.S.pipe,with2"dia1.5mlongM.S.Bracketandareweldedwithsuitableangle,using6mm...

11.8.6 LED Street Light 150W Supply & Fixing of LED Street Lightwith pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser ...

5.7.2) 32Amps Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

5.13.1 ) 25 Amps Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 R...

5.18.7) 6-32 A TPN MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 ...

5.47) 3-120sec setting. Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,

5.42.3) 18 SWG MS Box Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinge...

3.9 Hylum plastic sheet Supplyingandfixinghylumplasticsheet3mmthickwithnecessarynitchesforfixingswitches,regulatorsetc.,andfixingonexistingwood or metal box using N. F. screws.

12.17.3) 8 m and above street lightpole. Paintingofexistingstreetlightpoleafterscrappingtheoldpaintandpaintedwithsuitablecolourenamel/Silverpaintincludingcoping/footing of the pole.

12.04) 63 kVA, Aluminum Wdg, Star 2 (5 Star) Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014

24.06 H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS

17.01 LT Protection Kit(Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018)

24.01) 11 kV, 200 Amps Single Break GOS (Dwg No. KPTCL/GM/QS&S/23 Dtd 24.11.2018) GOS as per IS-9921, IS-1977

13.02) Fixing of GOS including wiring (11 kV Single Break 200 Amps)

19.01) 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR(Dwg No. KPTCL/GM/QS&S/26 Dtd 24.10.2007). Lightning Arrester as per IEC-60099-4

13.06) Fixing of 3 Nos Lightning Arrestor including wiring

18.01) LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal)(Dwg No. KPTCL/GM/QS&S/58 Dtd 24.11.2018).LT Distribution Box as per IS-13947 Part-1&2

15.04) Wiring of 1 Circuit of LT Wiring for for 25/63/100 kVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin cross arm, Spac...

53.01) CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port UNIDIRACTIONAL (Used for HT Installation, LT Metering Cubicle 50-150 KW

55.04) LT Metering Box for housing the ETV Meter without CT's busbar wiring etc

1.01) RCC Pole - 9 Mtr Long, 145 Kg WL (Dwg No. KPTCL/GM/QS&S/02 Dtd 24.11.2018) as per IS-785

2.16) Spiral Earth Electrode

7.02) Rabbit ACItem , (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

8.01) 7/10 SWG Guy Wire, Basic Rate:77226.00

(7/3.251 mm Dia), Std Wt: 680 Kg/KM

5.09 Guy Clamp - MS,

6.11) 11 kV, 70 kN Composite/Polymeric Insulator

20.01) 11 kV, HG Fuse Unit with Solid Core Insulator(Dwg No. KPTCL/GM/QS&S/21 Dtd 24.11.2018).HG Fuse Unit as per IS-5350 Part-2

13.01) Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring

49.01) PVC Wire - 16 SqmmAl Wt: 4.2 Kg, Total Wt: 7.5 Kg/100 Mtr Coil 1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010

2.02) Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

1.1.1) Ordinary Soil Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.

25.02) 11 kV, DOLO Cutout REC Specification(Dwg No. KPTCL/GM/QS&S/20 Dtd 24.11.2018) DOLO Cutout as per IS-9385, Part-1 to 3

2.01 11 kV, Horizontal Cross Arm - Mild Steel (MS) (Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018) Cross Arms (MS & GI) as per IS-1977

6.02) Stringing of conductor Rabbit ACItem , binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.

1.7.1) Ordinary Soil Digging of Pit for GUY SET 1.7.1 Ordinary Soil

5.10) Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

2.3.4) 4 sqmm Wire:

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiri...

5.06 Fixing of HT/LT Single Top Support

13.5 Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existingpole /wall ceilingincluding clamps, bolts, nutsandwiring using suitable capacity wires.