Electrical house wiring for 02 Nosqtr No C/09 and C/14 at officer colony under SDOCM

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc.as required.(Bulb point-20 point, Tube point-12 point, Fan point-10 point,Exhaust point-4 point, Call bel -2 point)

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size)on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size)on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and15/16amps piano types witch, connection, painting etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. asrequired.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, Complete with tinned copper busbar, neutral bus bar,earth bar, dinbar, inter connections ,powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing stepped type electronic fan regulator on the existing modular plates witch box including connections but excluding modular plate etc. as required.

Providing and fixing following capacity TP&N disconnect or fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections etc. as required 32 Amps

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I.wire on surface or inrecess for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Providing and fixing 50 mm dia X 3.2 metres G.I. pipe (including accessories) complete with 50 mm X 50 mm X 6 mm angle iron bracket on wall and 75mm X 90mm shackle insulator with straps for house service connection including painting the angle and flat iron with primer and finish paint etc.as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing 3pin,5amp ceiling rose on the existing junction box/wooden block including connection etc as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Total impact of GST for the purpose of CTC

M/s Arvind Kumar Singh

M/s Sanjay Supplier