Karnataka

Active

Works

Buildings

Providing Basic Facilities to Government High School S.M.Krishna Nagar at Gadag in Gadag Tq/Dist.

Public Works Department

PWD Division Office Gadaga | Karnataka

Amount: ₹16.9 LCloses: 17 Sept 20267d left

Timeline

Published3 Sept 2026
Closes17 Sept 2026

Tender Value

₹16.9 L

EMD Value

₹42,300

Closing Date

17 Sept 2026, 4:00 pm7d left

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

Providing Basic Facilities to Government High School S.M.Krishna Nagar at Gadag in Gadag Tq/Dist.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT33451/CALL-2

Reference Number

PWD/2025-26/BD/WORK_INDENT33451/CALL-2

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Gadaga

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate With UDIN Number is Mandatory

RequiredContractors PWD Registration Certificate

RequiredSingle Similar Nature Work done Certificate

RequiredAddress Proof Adhar/Pancard

RequiredBid Capacity on Contractor Letter Head

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Conditional tenders will not be accepted

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

All necessary arrangements shall be made and precaution taken to prevent completely or partially, damage to the structure or labours / employees during construction period. (As per recent Labour Act) Contractor shall be fully responsible for any damage to the structure during the construction and maintainance period.Any damage caused due to any reasons shall be rectified / replaced at his own cost as per the direction of Engineer in charge. Nothing shall be payable by the Department on account of inclusive of all such arrangements/ precautions work needed.

Tenderer shall obtain the Work Done Certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer( District Level Officer), scan the original Certificate and attach the scanned file to the tender. The Original Certificate shall be produced at the time of opening of Technical Bids for physical verification

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards labour welfare fund.

The employer reserves the rights to Reject one or all Tenders without assigning any reasons.

The Item Rates quoted shall include cost of Royalty charges on constructive materials

The awarded Contractor has to Submit his bills through e-MB for payment.( Billing is through e-Mb ie: Contractor has to produce Soft copy and hard Copy of RA or Final bill for payments)

3.2(a) To qualify for award of this contract,each Tenderer in its name should have in the last five years i.e From 2021-22 to 2025-26 achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.16.90 lakhs

3.2(b) To qualify for award of this contract,each Tenderer in its name should have in the last five years i.e From 2021-22 to 2025-26 Mandating satisfactorily completed, as prime contractor, at least one similar nature of work of value not less than Rs.8.45 Lakhs.

EMD of Rs.42300.00 should be paid in Single Payment

The tenderer should maintain the work during the Defect Liability Period which is One year After Successful Completion of the work

Contractors registered under class-1 and 2 may tender for works anywhere in the state.Contactors registered under class-3 may tender for works within the districts of the PWD circles where in they are registered. Contactors registered under-4 may tender for works within the districts or within the division whichever is applicable

The Department is not responsible for any delay in accessing KPPP portal

The contractor must provide barricades, precautionary boards and safety measures at the work site.

Department will not supply any materials.

The item rates are excluding GST but inclusive of all other charges.

GST shall be paid to the tendered amount separately.

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delays as determined by the authority while granting the extension of time.

Any Deviation or error or Mistakes found in units of items they should be read as in the unified SR 2023-24 and Continued to 2025-26 the rates shall be quoted accordingly

Tender period for Work Completion/Execution Period : 04 Months(EXCLUDING MONSOON PERIOD) As per Govt Circular No.PW 545 CRM 2025(e) dated-27-11-2025, Monsoon period will be considered as per D Code

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹42,300

Important Dates

Last Activity

4 Sept 2026

Published

3 Sept 2026

Download Ends

15 Sept 2026

BOQ Preview

•

Providing Basic Facilities to Government High School S.M.Krishna Nagar at Gadag in Gadag Tq/Dist.(Civil Work and Gem Items)

•

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 m² and under, including cutting the patch in proper shape, raking out joints and preparing plasterin...

•

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

•

Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 g/L of approved brand and manufacture to give an even shade :Old work (one coats) as per ...

•

Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 g/L of approved brand and manufacture to give an even shade :Old work (one coats) as per ...

•

Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 g/L of approved brand and manufacture to give an even shade :Old work (one coats) as per ...

•

Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 l/10 m² complete includ...

•

Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 l/10 m² complete includ...

•

Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 l/10 m² complete includ...

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :One coats on old work as per specifications and as per directions of En...

•

Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Cast in Situ Cement Concrete M20 Kerb - Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm t...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers ...

•

Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of a...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of mate...

•

Providing and fixing chromium plated brass curtain rod with ISI mark hav- ing wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherev...

•

Providing & fixing 100% Polyester Curtains with specification of

•

regular wash as per direction of Engineer in charge

•

Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...

•

Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all l...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

•

Providing and fixing PTMT bib cock of approved quality and colour - 15mm nominal bore, 86 mm long, weighing not less than 88 g

•

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good ...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 15...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

•

STUDYNLEARN 75 Inch Display Interactive Panel with CPU with warranty 3 Years STUDYNLEARN (IS-IFPSeries 75) Product ID 5116877-86517035746

•

hp A4 and Legal Size Monochrome (Black) Laser Multifunction Machine hpR (HP LJ Pro MFP 3104fdw Printer ) Product id: 51168778453165236

•

Inlight Projector Screen 100 Inches InlightR (Inlight 7x5(100") Autolock) 5116877-80127194656

•

ZEBRONICS Long Throw (above 2.5) Multimedia Projector (MMP) With 1920 x 1080 (Full HD) Resolution -5116877-89135269540

•

Alpha Carbon Graphite Kevlar Head Field Hockey Sticks R Alpha AX9 product ID-5116877-15661047424

•

FEETA Aluminium Alloy Field Hockey Goal Post R FEETA (LEGGUARD) (Product ID-5116877-65190109856)

•

KOXTANS Aluminium Alloy Table Tennis Table R KOXTANS (KOXTANS)(Product ID- 5116877-53278050157)

•

KOXTANS Mild Steel C Channel Standard obstacle Clear Jump R KOXTANS (KOXTANS)(Product ID- 5116877-95663439751)

•

Digitone Digital Weighing Scale DigitoneR

•

Cosco Volleyball Any other Uniform Light Colour as per buyer's requirements Flexible Leather Volleyballs Cosco Volleyball R (COSCO SUPER VOLLEYBALL)(Product ID 5116877-70243951591)

•

COSCO SPORTS Nylon ( 10 meter Volleyball Net R COSCO SPORTS

•

(cosco)(Product ID 5116877-59908869573)

•

Alfa Field Hockey Balls suitable for Training R Alfa (AB -93)(Product ID- 5116877-66250541552)

•

DECATHLON Carbon Fiber Badminton Racket of length 660 mm R DECATHLON (ID: 8513986)(Product ID-5116877-96274121669)

•

yonex Synthetic Material Badminton Shuttle Cock, Pack of 6 yonex R (ST005)-5116877-66144586579

•

nivia Machine Stitched Football, Numbers of Panels 32 R nivia (NIVIA-COUNTRY-COLOUR-FOOTBALL)-5116877-1347285101

•

VECTOR X Polyvinyl Chloride (PVC) Skipping Rope of Length 7 meter R VECTOR X Skipping Rope 684) (product id-5116877-19339182012)

•

DECATHLON Shin Guard for Football Medium- Kids ( 130- 140 cm ) R DECATHLON (8756923)(product ID-5116877-32613225015

•

ALMICRO Microscopes - Pathological and Research as per IS:4381, IS:5204, Warranty 5 year ALMICROR(BM-6bi - Plan Achromatic)(Product ID-5116877-52579807445)

•

TRENDS FURNISHERS Stainless Steel Grade 304 galvanized Shelf Rack With 5-Shelf (including top shelf) TRENDS FURNISHERSR (TF-N190)-5116877-42233921670

•

SHRINATHJEE Silver Grey Colored Steel Shelving Cabinets SHRINATHJEER(ALMARIH)-5116877-92425629823

•

s Composite Office Tables confirming to IS 8126 Drawer and filing units R(S Composite Office Tables)-5116877-93157272475

•

Providing Basic Facilities to Government High School S.M.Krishna Nagar at Gadag in Gadag Tq/Dist.(Inverter)

•

Supplying, erecting, testing &commissioning of OFF-LINEUPS systemsuitable for operation on 230V,50Hz,A /Csupply,withall accessories complete and Excluding batteries and wiring complete. 2 kVA OFF LINE...

•

Supplying, installation, testing & commissioning of 12V .AH batteries inpolypropylenecontainer forD.G. sets.Lowmaintenance batteries, plate type. 150 AH capacit

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Gen Bid doc KW-1-33451 -call-2.doc

Tender Document • 0.24 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .