E-tender/Eng/EQ-147/25-26

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Average run 6 mtr

S&F 240V ,16A 3pin mod type plug socket with 16A mod type switch &n 1no 6A 3pin mod type plug socket with 6A mod type switch without plug top one 10A switch type 'C type MCB' on 8 mod GI mod type switch board…..continuity wire etc

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl.necy fittings as required 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC(LDB to S/Board)

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2x84/0.3(6sq.mm)+1x56/0.3(4sqmm) ECC

supplying of PVC Arm cable with AL conductors of 1.1 KV grade conforms toIS 1554[part-1]for following X section incl laying of cable upto3/4 core25sq.mm on wall/surface inclS & F earthing attachment by 10SWG GI wire[Hot Dip] making holes etc as necy good damages 1x10sq.mm3 C

S&F compression type gland complete with brass gland rubr rings for dust & moisture proof entry incl Finishing the end of following cables by crimping method incl S&F dowels etc. 1x16sq.mm 3core

Supplying of luminaires which are as follows….. TMC 501 P 2xT-LED incl.mounting rail for TLED lamps (Philips/Havells/C&G)

TLED Essential tube 1200mm..1600 Lumen 20w(Philips)

D)Supply & fixing of high speed (2000rpm)wall fan 400 mm(16") with regulator full metal body 3starIS 374:2019 withBLDCmotor,minimum air delivery 210m3/min 3star BEE rating with service value >4.1 to<5.1, CG,Havells or equivalent make

S&F D/D horizontal SPN MCB DB with IP42/43…with neutral link & provision for earthing attachment 2+12way,Legrand,Schneider,L& T incl S & F240/ 415V MCB isolator on DIN rail of existing DBs & necy connection 63A DP,Legrand,Schneider,L&T as incomer &Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection SP 6-32Amps Legrand as outgoing 12 nos

supplying of 1ph 12''45watt,920rpm heavy duty exhaust fan EPC make &Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")

Supplying, Installation, Testing & Commissioning of following Watt Street Light LED luminaire having colour temperature not less than 5700K, lumen output not less than 4500 lumen complete with energy efficient LED Driver, IP 66 protection die cast aluminium housing with toughened glass cover, all other accessories, etc. duly complete for use on 230 Volt single phase 50 Hz AC supply on existing street light bracket i/c connection to Luminaires etc. complete as per specification as required.(Make: Jaquar, Philips Polycab /Wipro/ Crompton) 1]45Watt

Fixing only outdoor/street light fluorescent light fitting complete with all accessories to be fixed from the wall of the building incl making holes to building ,S & f 40mm dia GI pipe 1.50mtr length with GI socket at one end…..with S & F necy length of 1.5sq.mm.....incl painting.

Earthing with 50mm dia GI pipe3.64mm mmx thick x3.04 mtr wire 4mtr long,13mmdiax80mm long gi bolts,double nuts,double washers incl S & F15mm dia GI pipe protection….below the GL as below;By ISI-Med GI Pipe

Excavation of soil for installation of earth electrode & filling & ramming a) for soft soil

Extra for providing masonary enclosure on the top of the earth electrode overall size 86.36x86.36x46 cm deep……. GI pipe

S & F earth busbar of galvanized MS flat of 25x6 mm on wall having clearence of 6mm incl providing of drilled holes…….as required

connecting the equipment to earth busbar incl S& F GI wire of size as below on wall staples inside wall as reqd & making connection with equipments with nut bolts etc & mending good damages. 10SWG

KUNDU ELECTRICALS (BID ID -6639499)

NEW ERA ENTERPRISE (BID ID -6644134)

CHAKROBORTY TRADERS (BID ID -6666386)