Development of Distribution Infrastructure at South Garo Hills of Meghalaya under the Revamped Reforms-based and Results-linked, Distribution Sector Scheme.

11 KV _ Reconductoring ( 241 Sqmm MVCC)

Line Length (45.74 Ckm)

Galvanised Pole 9.5 M long (ND)-(SP 39)

M.S. Channel 75x40x4.8x2280 mm

M.S. Channel 75x40x4.8x1200 mm

HT Top Bracket MS Channel 75x40x4.8x300 mm

Covered AAAC Conductor 11 KV ,241 sqmm

11 KV Poly Pin Insulator with GI Pin and nuts & bolts for MVCC-241 Sqmm

11 KV Poly Tension Insulator with clamps, nuts & bolts suitable for 241 sqmm MVCC

11KV Poly Tension Hardware with clamps, nuts & bolts suitable for 241 sqmm MVCC

IPC/Wedge connector suitable for 241 sqmm MVCC

NDA-Silica/Surge Arrestor, 9 KV 10 KA class-1

Insulated cable tie

11 KV Mid span Jointing Kit for 241 sqmm MVCC

11 KV Termination Kit for 241 sqmm MVCC

11 KV Bracing Set (Single Tier - Z type)

HT Stay Set Complete

Stay wire 7/12'' SWG

H.T. Guy insulator 88KN(Complete Set)

11 KV Lightning Spike

G.I Pipe 100 mm diameter

G.I Wire 8 swg

Cradle guard cross arm for DP structure(65X65X65X6X3800)

G.I. Wire 10SWG

G.I. Wire 6SWG

H.T. pole clamp (T) 9.5/12.0ND

H.T. pole clamp (M) 9.5/12.0ND

H.T. pole clamp (B) 9.5/12.0ND

H.T. Jam clamp (T) 9.5/12.0ND

AI. Paint

Red oxide paint

G.I. through nuts & bolts with washers 5/8"X10"

M.S. nuts & bolts 5/8''X4''

Barbed Wire

11 KV Danger plate

Cement for grouting pole base and Stay

Reconductoring LT Bare to AB Cable(3CX 50Sqmm (168A) + 1CX 35 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light))

Line Length (69.7 Ckm)

Galvanised Pole - 8.0 mtrs(SP- 14)

3CX 50Sqmm (168A) + 1CX 35 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light))

CABLE TIE

ANCHOR CLAMP WEDGE TYPE LT ABC as per NFC STANDARD

SUSPENSION CLAMP ABC as per NFC STANDARD

EYE HOOK/ EYE BOLT

POLE CLAMP

Insulating Piercing Connector IPC EP95 FOR STREET LIGHTING as per NFC Std.

Insulating Piercing Connector IPC P2X95 FOR DB CHARGING as per NFC Std.

Insulating Piercing Connector IPC P3X95 FOR ABC TO ABC TEE CONNECTION as per NFC Std.

CABLE END CAPS FOR ABC CABLES

ASA DISTRIBUTION BOX FOR 200A, 3PH. 10 CONNECTORS with Spring Loaded Busbar System

STEEL STRAP for Installing DB SIZE 22 MM X 1 M LONG

BUCKLES FOR STEEL STRAP for DB Fixing

INSULATED Waterproof BIMETALLIC LUG FOR Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std.

INSULATED Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std.

STAY SET

STAY WIRE 7/20SWG COMPLETE WITH ALL ACCESSORIES

Cement for Grouting of Pole Stay foundation

Aluminium Paint

Red Oxide

Description of Work / Item(s)

11 KV _ Reconductoring ( 241 Sqmm MVCC)

Line Length ( 45.74 Ckm)

Excavation of Pole Pits (Pits size 450x450x1600mm for 9.5 m pole)

i) In hard rock.

ii) In soft rock mixed with earth.

iii) In normal soil.

Erection and Grouting of Steel Tubular poles: The work comprises of erection of pole including base plate & grouting from the base up to a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

9.5 m long

Erection of stay set: The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole with clamp including fitting of guy insulator and all other associated work of stay including loading carrying, unloading, dragging etc.to site)

a) H.T. stay set

Earthing: Earthing of pole location with G.I pipe including digging of earth pit and filling the pit with charcoal, salt and earth and making necessary connection complete.

(a) Single and Double Pole Location

Fitting and fixing of Bracing set complete:

(a) Z type bracing set

Fitting and Fixing of channel/cross arm

i) Fitting and Fixing of single including fitting of insulator complete each

(ii) Fitting and Fixing of double including fitting of insulator complete each

(iii) Fitting and Fixing of single cross arm(Y cross arm/X cross arm along with HT Top

Fitting and fixing of cross arm for Cradle Guard:

b) Double Pole (11KV)

Fitting and fixing of guard wire including making of guard net with 6 SWG, 8 SWG, 10 SWG, G.I. wire of 400 mm mesh or as directed including earthing of cradle guard.

a) Guard 11 KV line

Paying out Stringing of conductor (A.C.S.R. and A.A.C. A.A.A.C): Paying out and stringing of conductor fixing with disc insulator string and over the pin insulator including binding and jumpering wherever necessary complete. Safety measures is to be taken towards damage of conductor while paying out. A. For H.T Line

a. Covered AAAC Conductor 11 KV ,241sqmm

Painting of poles and other iron materials with 1 coat of Red oxide paint and 2 coats of Alluminium paint.

(i) Channel Cross arm (any length upto 3.5 mtrs)

(ii) Bracing set Z type

(iii) Cradle guard cross arm

Fitting and fixing of Danger plate as directed.

Fitting of anti -climbing device: Fitting and fixing of barbed wire for anti -climbing to the pole from a height of 1500 mm from the ground level to a height of 3000 mm complete.

Fitting and fixing of Pole Clamp/Jam

Dismantling of Poles,Conductor and accesseries(as per requirement)

Reconductoring LT Bare to AB Cable(3CX 50Sqmm (168A) + 1CX 35 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light))

Line Length ( 69.7 Ckm)

Excavation of Pole Pits (Pits size 450x450x1600mm for 8 m pole)

i) In hard rock.

ii) In soft rock mixed with earth.

iii) In normal soil.

Erection and Grouting of Steel Tubular poles: The work comprises of erection of pole including base plate & grounting from the base upto a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

a) 8 m long

Erection of stay set: The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole with clamp including fitting of guy insulator and all other associated work of stay including loading carrying,unloading,dragging etc.to site)

a) stay set

Fitting, fixing, stringing etc of CABLE 1.1KV ABC WITH INSULATED MESSENGER WITH ONE STREET LTG. COND 3CX 50Sqmm (168A) + 1CX 35 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light)) and all related accessories complete in all respect.

Dismantling of Poles,Conductor and accesseries(as per requirement)

Description of Work / Item(s)

New HT Line ( Weasal Conductor)

Line Length ( 134.2 Ckm)

Galvanised Steel Tubular Pole 9.5 meters(SP-39)

ACSR “Weasel” conductor

MS Channel cross arm 75×40×4.8×2280 mm

MS Channel cross arm 75×40×4.8×1200 mm

MS Channel top bracket 75 * 40 *4.8 * 310 mm

11 kV Disc insulator ( 70 KN )-Double Disc

H/W fittings(complete) for ACSR “Weasel” conductor

Single Tier Z - type ( 50 × 50 × 6 ) bracing set

11 KV Pin Insulator with GI Pin

G. I. Earthing pipe 40mm diameter

Cradle Guarding for DP structures ( 65 × 65 × 6 ×3800)

Cradle Guarding for single pole

G. I. wire , 8 SWG for guarding and grounding

G. I. wire -6 SWG for guarding

HT stay set

11 KV guy insulator

PG clamp, for ACSR weasel

11kV Danger plate

MS Nuts & Bolts 5/8 × 4"

Barbed wire

G.I Stay wire , 7/10 SWG

Steel Pole clamp of 9.5mt(N/D) M.S. flat 50×6 mm(T)

Steel Pole clamp of 9.5mt(N/D) M.S. flat 50×6 mm(M)

Steel Pole clamp of 9.5mt(N/D) M.S. flat 50×6 mm(M)

Jam clamp of 9.5mt (N/D) M.S. flat 50×6 mm

Cement for Grouting of Pole & Stay foundation

Aluminium Jointing Sleeves for Weasel

11 KV lighting spikes

GI Through Nuts & bolts 5/8 " × 8 "

Aluminium Paint

Red oxide paint

11 KV Line ( LT to HT Conversion , Weasel Conductor)

Line Length (44.64 Ckm)

Galvanised Pole 9.5 M long (ND)-SP39

ACSR “Weasel” conductor

M.S. Channel 75x40x4.8x2280 mm

M.S. Channel 75x40x4.8x1200 mm

HT Top Bracket MS Channel 75x40x4.8x310 mm

Disc insulator (70 KN) double

H/W fittings for ACSR “Weasel” conductor

Single Tier Z - type ( 50 × 50 × 6 ) bracing set

G.I Pin For 11KV with Pin insulator

G. I. Earth pipe 40mm diameter

cradle Guarding for DP structures ( 65 × 65 × 6 × 3800)

Cradle Guarding for single pole

G. I. wire , 8 SWG for earthing/guarding

G. I. wire -6 SWG

HT stay set

HT stay KV guy insulator

PG clamp, for ACSR "Weasel"

11kV Danger plate

MS nuts and bolts with GI washer (Assorted)

Barbed wire

G.I Stay wire , 7/10 SWG

HT Pole clamp of 9.5mt(N/D) M.S. flat 50×6 mm(T)

HT Pole clamp of 9.5mt(N/D) M.S. flat 50×6 mm(M)

HT Pole clamp of 9.5mt(N/D) M.S. flat 50×6 mm(B)

jam clamp of 9.5mt (N/D) M.S. flat 50×6 mm

Cement for Grouting of Pole Stay foundation

Aluminium Paint

Aluminium Jointing Sleeves for "Weasel"

GI Through Nuts & bolts 5/8 " × 8 "

New AB Cable(3CX 50Sqmm (168A) + 1CX 35 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light))

Line Length ( 40.6 Ckm)

Galvanised Pole - 8.0 mtrs(SP-14)

3CX 50Sqmm (168A) + 1CX 35 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light))

CABLE TIE

ANCHOR CLAMP WEDGE TYPE LT ABC as per NFC STANDARD

SUSPENSION CLAMP ABC as per NFC STANDARD

EYE HOOK/ EYE BOLT

POLE CLAMP

Insulating Piercing Connector IPC EP95 FOR STREET LIGHTING as per NFC Std.

Insulating Piercing Connector IPC P2X95 FOR DB CHARGING as per NFC Std.

Insulating Piercing Connector IPC P3X95 FOR ABC TO ABC TEE CONNECTION as per NFC Std.

CABLE END CAPS FOR ABC CABLES

ASA DISTRIBUTION BOX FOR 200A, 3PH. 10 CONNECTORS with Spring Loaded Busbar System

STEEL STRAP for Installing DB SIZE 20 MM X 1 M LONG

BUCKLES FOR STEEL STRAP for DB Fixing

INSULATED Waterproof BIMETALLIC LUG FOR Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std.

INSULATED Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std.

STAY SET

STAY WIRE 7/20SWG COMPLETE WITH ALL ACCESSORIES

Cement for Grouting of Pole Stay foundation

Description of Work / Item(s)

New HT Line ( Weasal Conductor)

Line Length ( 134.2 Ckm)

Excavation of Pole Pits:-

i) In hard rock.

ii) In soft rock mixed with earth.

iii) In normal soil.

Erection and Grouting of Poles: The work comprises of erection of pole including base plate & grounting from the base upto a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

ii.9.5 m long

Erection of stay set: The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole with clamp including fitting of guy insulator and all other associated work of stay including loading carrying,unloading,dragging etc.to site)

a) H.T.stay set

Earthing: Earthing of pole location with G.I pipe including digging of earth pit and filling the pit with charcoal,salt and earth and making necessary connection complete.

Single&Double pole location.

Fitting and fixing of Bracing set complete:

(a) Z type bracing set

Fitting and Fixing of single channel including fitting of insulators complete.

Fitting and Fixing of double channel including fitting of insulators complete.

i) 11KV Line

Fitting and fixing of Single pole cross arm

(a)Fitting and fixing of Y cross arm or channel X-arm along with HT top bracket alongwith fitting and fixing of insulators complete.

Fitting and fixing of cross arm for Cradle Guard:

a) Single Pole (11KV)

b) Double Pole (11KV)

Fixing of Cradle guard: Fitting and fixing of guard wire including making of guard net with 6 swg, 8 swg, 10 swg, G.I. wire of 400 mm mesh or as directed including earthing of cradle guard.

a) Guard 11 KV line

Paying out Stringing of conductor (A.C.S.R. and A.A.C. A.A.A.C) Paying out and stringing of conductor fixing with disc insulator string and over the pin insulator including binding and jumpering wherever necessary complete.Safety measures is to be taken towards damage of conductor while paying out. A. For H.T Line

ACSR"Weasel" conductor

Painting etc:- Painting of iron materials e.g. cross arm & bracing set etc . One coat of Red oxide paint & Two coats of Aluminium paint:-

(i) Channel cross arm (any length upto 3.5 m)

(ii) Bracing set 'Z' type

(iii) Cradle guard cross arm (both S/P, D/P & HT/LT)

Fitting and fixing of Danger plate as directed.

Fitting of anti -climbing device: Fitting and fixing of barbed wire for anti -climbing to the pole from a height of 1500 mm from the groung level to a height of 3000 mm complete.

11 KV Line ( LT to HT Conversion , Weasel Conductor)

Line Length ( 44.64 Ckm)

Excavation of Pole Pits:- a)Pit size :(500 × 500 × 2000)mm for 14.5 Mtrs.12 Mtrs(ND) and 12 Mtrs (HD) Pole

i) In hard rock.

ii) In soft rock mixed with earth.

iii) In normal soil.

Erection and Grouting of Poles: The work comprises of erection of pole including base plate & grounting from the base upto a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

ii.9.5 m long N/D

Erection of stay set: The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole with clamp including fitting of guy insulator and all other associated work of stay including loading carrying,unloading,dragging etc.to site)

a) H.T.stay set

Earthing:Earthing of pole location with G.I pipe including digging of earth pit and filling the pit with charcoal,salt and earth and making necessary connection complete.

i.Single&Double pole location.

Fitting and fixing of Bracing set complete:

(a) Z type bracing set

Fitting and Fixing of double channel including fitting of insulators complete for:

i) 11KV line

Fitting and fixing of Single pole cross arm/ Channel including fitting of insulators complete

Fitting and fixing of Y cross arm or channel X-aem alo9ng with HT top bracket alongwith fitting and fixing of top bracket with fitting and fixing of insulators complete for:

(b) 11kv Line

Fitting and fixing of cross arm for Cradle Guard:

a) Single Pole (11KV)

b) Double Pole (11KV)

Fixing of Cradle guard: Fitting and fixing of guard wire including making of guard net with 6 swg, 8 swg, 10 swg, G.I. wire of 400 mm mesh or as directed including earthing of cradle guard.

Guard 11 KV line

Paying out Stringing of conductor (A.C.S.R. and A.A.C. A.A.A.C) Paying out and stringing of conductor fixing with disc insulator string and over the pin insulator including binding and jumpering wherever necessary asper direction of board's supervisor.Safety measures is to be taken towards damage of conductor while paying out. A. For H.T Line

i.ACSR"Weasel" conductor

Painting etc:- Painting of iron materials e.g. cross arm & bracing set etc . One coat of Red oxide paint & Two coats of Aluminium paint:-

(i) Channel cross arm/Y-Xarm (any length upto 3.5 m)

(ii) Bracing set 'Z' type

(iii) Cradle guard cross arm (both S/P, D/P & HT/LT)

Fitting and fixing of Danger plate as directed.

Fitting of anti -climbing device:Fitting and fixing of barbed wire for anti -climbing to the pole from a height of 1500 mm from the groung level to a height of 3000 mm

Dismantling of Poles,Conductor and accesseries(as per requirement)

New AB Cable(3CX 50Sqmm (168A) + 1CX 35 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light))

Line Length ( 40.6 Ckm)

Excavation of Pole Pits:-Pit size :(450 × 450 × 1600)mm for 8 Mtrs Pole

i) In hard rock.

ii) In soft rock mixed with earth.

iii) In normal soil.

Erection and Grouting of Steel Tubular poles: The work comprises of erection of pole including base plate & grounting from the base upto a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

a) 8 m long

Erection of HT set:The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole with clamp including fitting of guy insulator and all other associated work of stay including loading carrying,unloading,dragging etc.to site)

a) stay set

Fitting, fixing, stringing etc of CABLE 1.1KV ABC WITH INSULATED MESSENGER WITH ONE STREET LTG. COND 3CX 50Sqmm (168A) + 1CX 35 Sqmm (Insulated Messenger) + 1CX 16 Sqmm (Street light)) and all related accessories complete in all respect.

Description of Work / Item(s)

New Distribution Transformer ( 63 KVA)

New Distribution Transformer ( 31 No.)

Galvanised STP pole SP 60 -12 Meters.

63 KVA DTR ( EE Level-2)

Lightning Arrestor, 11 KV 9 KA (Line Type)

C. I. Earth pipe 6' feet length and 2" dia

M.S Channel cross arm 75x40x4.8x2800 mm

M.S Channel cross arm 100x50x6x2800 mm

Angle Iron 50 X 50 X 6 X 2800 mm

Pole clamp of (12.0&9.5mt )M.S. flat 50×6 mm(top)

Pole clamp of (12.0&9.5mt )M.S. flat 50×6 mm(middle)

Pole clamp of (12.0&9.5mt )M.S. flat 50×6 mm(bottom)

jam clamp of M.S. flat 50x6 mm, 12m top

jam clamp of M.S. flat 50x6 mm, 12m bottom

M. S. nuts and bolts with MS washer(Assorted) 5/6x4in

GI through bolts ( 5/8 × 8 ") & (5/8X10")

11 KV Gang cum DO Unit 200 A

11 KV Pin insulator

GI pin for 11 KV Pin insulator

11 kV Disc insulator ( 70 KN)(Double disc)

ACSR “Weasel” conductor for Jumpering

H/W fittings

HT Stay set

HT Guy Insulator

Stay Wire 7/10 SWG (G.I)

G. I. wire -6 SWG

LT XLPE Cable 1-core 95 Sq.mm. .

Outdoor Pole Mounted/Ground Mounted LT Distribution box having Remote Controlled - Smart MCCB with in-built Auto Recloser providing electrical parameters, GPRS communication module Distribution transformer wise to communicate Smart MCCB, Web based Software to control and monitor all Smart MCCB and provide data analysis. Box should be made of MS Sheet of thickness not less than 16 SWG CRCA Sheet, Dust and Moisture proof, Waterproof with degree protection with suitable aluminium bus bar for R, Y, B and Neutral Phase. Front door opening with proper locking arrangement, lugs mounting, channel frame, danger plate, numbering, back clamps. Hardware as per Techenical specifications

Aluminium Paint

11 KV Danger Plate

Bi-metallic Cable lug (Assorted)

Barbed wire

Cement for Grouting of Pole & Stay foundation

Sub station Fencing with FRP Fencing Complete.(3x3m)

Red Oxide

New Distribution Transformer ( 100 KVA)

New Distribution Transformer (37 No.)

Galvanised STP pole SP 60 -12 Meters.

63 KVA DTR ( EE Level-2)

Lightning Arrestor, 11 KV 9 KA (Line Type)

C. I. Earth pipe 6' feet length and 2" dia

M.S Channel cross arm 75x40x4.8x2800 mm

M.S Channel cross arm 100x50x6x2800 mm

Angle Iron 50 X 50 X 6 X 2800 mm

Pole clamp of (12.0&9.5mt )M.S. flat 50×6 mm(top)

Pole clamp of (12.0&9.5mt )M.S. flat 50×6 mm(middle)

Pole clamp of (12.0&9.5mt )M.S. flat 50×6 mm(bottom)

jam clamp of M.S. flat 50x6 mm, 12m top

jam clamp of M.S. flat 50x6 mm, 12m bottom

M. S. nuts and bolts with MS washer(Assorted) 5/6x4in

GI through bolts ( 5/8 × 8 ") & (5/8X10")

11 KV Gang cum DO Unit 200 A

11 KV Pin insulator

GI pin for 11 KV Pin insulator

11 kV Disc insulator ( 70 KN)(Double disc)

ACSR “Weasel” conductor for Jumpering

H/W fittings

HT Stay set

HT Guy Insulator

Stay Wire 7/10 SWG (G.I)

G. I. wire -6 SWG

LT XLPE Cable 1-core 120 Sq.Mm.

Outdoor Pole Mounted/Ground Mounted LT Distribution box having Remote Controlled - Smart MCCB with in-built Auto Recloser providing electrical parameters, GPRS communication module Distribution transformer wise to communicate Smart MCCB, Web based Software to control and monitor all Smart MCCB and provide data analysis. Box should be made of MS Sheet of thickness not less than 16 SWG CRCA Sheet, Dust and Moisture proof, Waterproof with degree protection with suitable aluminium bus bar for R, Y, B and Neutral Phase. Front door opening with proper locking arrangement, lugs mounting, channel frame, danger plate, numbering, back clamps. Hardware as per Techenical specifications

Aluminium Paint

11 KV Danger Plate

Bi-metallic Cable lug (Assorted)

Barbed wire

Cement for Grouting of Pole & Stay foundation

Sub station Fencing with FRP Fencing Complete.(3x3m)

Red Oxide

Description of Work / Item(s)

New Distribution Transformer ( 63 KVA)

New Distribution Transformer (31 No.)

Excavation of Pole Pits:- Pit size : (450x450x1600) mm for 12 Mtr pole:

(i) In hard rock.

Erection and Grouting of Poles: The work comprises of erection of pole including base plate & grounting from the base upto a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

b) 12. m long

Erection of stay set: The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole wiyh clamp including fitting of guy insulator and all other associated work of stay including loading ,carrying,unloading,dragging etc.to site)

a) H.T.stay set

Earthing: Earthing of pole location with C.I pipe including digging of earth pit and filling the pit with charcoal,salt and earth as directed and making all necessary connection as directed.

(a )Double pole location.

Fitting and fixing of channel cross arm:

a) Single channel including fitting of insulators complete for 11 KV Line.

a) Double channel including fitting of insulators complete for 11 KV Line.

Paying out Stringing of conductor (A.C.S.R. and A.A.C. A.A.A.C) Paying out and stringing of conductor fixing with disc insulator string and over the pin insulator including binding and jumpering wherever necessary asper direction of board's supervisor.Safety measures is to be taken towards damage of conductor while paying out. A. For H.T Line

i) A.C.S.R.WEASEL Conductor.

Painting etc:- Painting of iron materials e.g. cross arm & bracing set etc . One coat of Red oxide paint & Two coats of Aluminium paint:-

i) Channel cross arm (any length upto 3.5 m)

Fitting and fixing of Danger plate as directed.

Fitting of anti -climbing device: Fitting and fixing of barbed wire for anti -climbing to the pole from a height of 1500 mm from the groung level to a height of 3000 mm

Installation of sub station :Pole Mounted Transformer Installation of all equiptments of sub station including dragging ( upto 250 m ), lifting & placing of transformer & its accessories from the road side to the transformer pad / location including fitting of DT Cubicle and all accessories , earth pits digging & fitting & fixing of earth pipes with all earth connections complete with filling of salt , charcoal, fitting of channels for D.O sets / L.A set & fitting & fixing of M.C.C.B, D.O sets , L.A , Gang switch , gang cum D.O etc . for transformer with all connection of HT side & LT side upto LT main switch/ busbar complete. i) Pole mounted Transformer

(b)11/0.4KV,63 KVA transformer

Drawing and connecting of L.T.cable Complete

Erection of : Outdoor Pole Mounted/Ground Mounted LT Distribution box having Remote Controlled

Sub Station Fencing including Civil work Complete

New Distribution Transformer ( 100 KVA)

New Distribution Transformer ( 37 No.)

Excavation of Pole Pits:- Pit size : (450x450x1600) mm for 12 Mtr pole:

(i) In hard rock.

Erection and Grouting of Poles: The work comprises of erection of pole including base plate & grounting from the base upto a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

b) 12. m long

Erection of stay set: The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole wiyh clamp including fitting of guy insulator and all other associated work of stay including loading ,carrying,unloading,dragging etc.to site)

a) H.T.stay set

Earthing: Earthing of pole location with C.I pipe including digging of earth pit and filling the pit with charcoal,salt and earth as directed and making all necessary connection as directed.

(a )Double pole location.

Fitting and fixing of channel cross arm:

a) Single channel including fitting of insulators complete for 11 KV Line.

a) Double channel including fitting of insulators complete for 11 KV Line.

Paying out Stringing of conductor (A.C.S.R. and A.A.C. A.A.A.C) Paying out and stringing of conductor fixing with disc insulator string and over the pin insulator including binding and jumpering wherever necessary asper direction of board's supervisor.Safety measures is to be taken towards damage of conductor while paying out. A. For H.T Line

i) A.C.S.R.WEASEL Conductor.

Painting etc:- Painting of iron materials e.g. cross arm & bracing set etc . One coat of Red oxide paint & Two coats of Aluminium paint:-

i) Channel cross arm (any length upto 3.5 m)

Fitting and fixing of Danger plate as directed.

Fitting of anti -climbing device: Fitting and fixing of barbed wire for anti -climbing to the pole from a height of 1500 mm from the groung level to a height of 3000 mm

Installation of sub station :Pole Mounted Transformer Installation of all equiptments of sub station including dragging ( upto 250 m ), lifting & placing of transformer & its accessories from the road side to the transformer pad / location including fitting of DT Cubicle and all accessories , earth pits digging & fitting & fixing of earth pipes with all earth connections complete with filling of salt , charcoal, fitting of channels for D.O sets / L.A set & fitting & fixing of M.C.C.B, D.O sets , L.A , Gang switch , gang cum D.O etc . for transformer with all connection of HT side & LT side upto LT main switch/ busbar complete. i) Pole mounted Transformer

(b)11/0.4KV,100 KVA transformer

Drawing and connecting of L.T.cable Complete

Erection of : Outdoor Pole Mounted/Ground Mounted LT Distribution box having Remote Controlled

Sub Station Fencing including Civil work Complete

Description of Work / Item(s)

Supply

Reconductoring

HVDS Line

HVDS DTR-

Sub Total

Erection

Reconductoring

HVDS Line

HVDS DTR-

Sub Total

Anvil Cables Pvt. Ltd.

STAR INFRATECH

Anvil Cables Pvt. Ltd.

STAR INFRATECH

Industrial Systems LLP

STAR INFRATECH

Anvil Cables Pvt. Ltd.

STAR INFRATECH

Industrial Systems LLP

STAR INFRATECH

Anvil Cables Pvt. Ltd.

STAR INFRATECH

Anvil Cables Pvt. Ltd.

STAR INFRATECH

Bidder Name

STAR INFRATECH

Industrial Systems LLP

Anvil Cables Pvt. Ltd.