Karnataka

Active

Works

Buildings

Construction of Court Coumpound Wall and Providing other Infrastrucutral facilities in the newly Constructing Court Building at Kolar

Public Works Department

PWD Division Office Kolar | Kolar, Karnataka

Amount: Refer DocsCloses: 10 Jul 20265d left

Tender Value

Refer Docs

EMD Value

₹5.8 L

Closing Date

10 Jul 2026, 9:30 pm5d left

Tender Inviting Organisation

Name

Public Works Department

Work Description

Construction of Court Coumpound Wall and Providing other Infrastrucutral facilities in the newly Constructing Court Building at Kolar.

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT36199

Reference Number

PWD/2026-27/BD/WORK_INDENT36199

Tender Type

Open

Product Category

Buildings

Location

PWD Division Office Kolar

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredWork done certificate issued by not below the rank of Executive Engineer.The workdone uploaded should consist of similar nature work i.e, building construction work

RequiredB value certificate

RequiredAnnual turnover certificate issued by Chartered accountant with UDIN Number for past 5 years i.e.,2021-22,2022-23,2023-24,2024-25,2025-26

RequiredGST certificate

RequiredPWD Registration Certificate class- II and above

RequiredLine of Credit

RequiredElectrical Licence

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The cost of the Tender processing fee shall not be refundable

In the case of the death of the contractor after executing the agreement / commencement of the work, his/her legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 K.P.W.D. and further orders thereon

The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given Clause 29.1 of ITT for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 29.4 of ITT and Clause44 of the Conditions of Contract

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.6 of STD tender document Attached

All the items in the tender including all lead, lifts, loading unloading, transportation, labor, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1%of the bill amount will be deducted towards constructions labor welfare fund.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

Contractor should follow strictly the prevailing rules of labor act &The contractor should employ only registered labors as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009

The difference amount and the percent security deposit submitted by the contractor for the project will be released upon completion of the defect liability period and receipt of the final bill

As per Government circular no: FD 355 EXP 12/2024 dtd 01.08.2024, Letter of Intent (LoI)will be issued in Karnataka Public Procurement Portal 2.0 software, contractor has to accept LOI online and submit the BG s through KPP portal within 20 days. if not tender will be rejected as per Guidelines.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval. All the originals of uploaded documents in KPP portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Contractor should take all precautionary measures to ensure that no damages caused to the existing structures which have been constructed by other agencies during project execution If any damages caused it has to be rectified at his own risk & cost

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division, Kolar during office hours on all working days

The Bankers certificate should be in prescribed format which is enclosed separately

The tenderer who quotes amount less than amount put to tender should pay difference amount in the form of FDR purchased through any nationalized bank payable at KOLAR only in favor The Executive Engineer at the time of execution of the tender agreement.

If any postponement of receipt date of tender, the same will be published in the KPP Portal portal.

The contractor who participates in tenders for more than one work for which tenders are invited in this IFT, the tenderer must fulfill all the conditions and criteria cumulatively for the participated works.

The returns submitted to the I.T. along with the Profit and Loss account statement should be uploaded for the financial turnover criteria attested by Chartered Accountant. The Turnover certificate should be obtained from the Chartered Accountant having UDIN number, if failed to satisfy the condition the tender will be Rejected

Contractor should execute the project with least impact to the environment especially during Cement concrete work.

Contractors participating in the bid should submit Original Line of Credit of the copy uploaded through KPPP Portal with in one week after the last date of receipt of tenders. failing which their technical bids will be rejected.

LOC / K-form for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection.

As per FD Circular 417 EXP 12/2024 Estimate rates are excluding GST as per common SR 23-24 Continued to 2026-27 and prevailing GST (18% of amount put to tender) amount is kept in form of lumpsum and in sanctioned estimate according to guidelines in common SR. Therefore, amount put to tender and ECV amount are excluding GST. KPPP portal format has no option to add GST separately at the stage of Draft Tender Schedule (DTS) process for overall amount put to tender, tender has been inviting through an option with INCLUSIVE but the item wise rate does not include hence GST will be paid separately for the quoted amount accordingly.

Tenderers participating in this work should not have previously gone through termination of works taken up in the department

Tenderers participating in this work should upload Electrical & Water supply consent letter from the concerned sub-contractors

Contractor Should be Registered with Class-II and above PWD Licence

The Defects Liability Period is 365 days

The contractor / supplier shall attach scanned Bank Guarantee along with the bid on KP-procurement portal and submit the original Bank Guarantee to the Executive Engineer PWD Division Kolar on before the last date and time notified in the Tender Document to the Tender Inviting authority. If The Contractor fails to submit such tenders will be rejected.

Technical Criteria

Past Experience

3.2 b. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22,2022-23,2023-24,2024-25,2025-26 satisfactorily completed (At least 90% of the Contract Value) as a prime contractor at least ONE SIMILAR NATURE OF WORK Such as Building work to an extent of 50% of the cost of the work, of any construction work of value not less than Rs192.00. Lakhs (Past experience) Certified duly by the 0fficer not below the rank of Executive Enginee

Work Done Certificate

3.2 d The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works of value not less thank Rs. 21.80 Lakhs (usually not less than 50% of the electrical works) in any one year

Work Done Certificate

3.2 c. executed in any one year in the last five years i.e. 2021-22,2022-23,2023-24,2024-25,2025-26 , the following minimum 80% quantities of work: 1) EWE/Embankment/Subgrade/Earthen Shoulders in Cum-2100.002) PCC/RCC/DLC In Cum 735.00 3)Steel Reinforcement in MT -5.00 4)Size Stone Masonry/BBM/Solid Concrete Blocks Cum 180.00 5)Cement Plastering sqm 575.00 6)Flooring/cladding using granite, vitrified tiles , ceremic tiles , color glazed tiles sqm-275.00 7) Painting 270.00 sqm 8) Structural Steel in Kg-48,000.00 9) Pre Cast Cement Concrete interlocking bloks in sqm-3070.00 (80% of peak rate of construction)

Work Done Certificate

Capabilities of Vendor

3.2 a All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3 Qualification information. 1.To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22,2022-23,2023-24,2024-25,2025-26 achieved in at least two financial years a minimum financial turnover(in all classes of civil engineering construction works only) of Rs. 767.00 Lakhs Financial Status(Certificate from CA with UDIN Number, if Failed to satisfy the condition tender will be rejected) (The turn over certificate shall have UDIN generated through ICAI Portal. Turn over certificate without UDIN will not be considered and treated as invalid. The confirmation letter issued by Chartered Accountant shall also have UDIN generated through ICAI Portal)

Audited CA Certificate of Annual Turnover

Financial Status

3.3 c Liquid assets and /or availability of credit facilities of no less than Rs.383.32 Lakhs (estimated cash flow for 3 months of peak construction period)

Line of Credit

Balance sheet for the past five years stating the gross civil engineering contract reciepts.The balance sheet uploaded should be auidted by the Chartered Account and should consist of valid UDIN Number.

Audited CA Certificate of Annual Turnover

The Contractor should upload the GST returns (GSTR-3B / GSTR-9) , Income Tax Return (ITR) filed for the relevant assessment year(s) and matches with the Year-wise statement of gross civil engineering contract receipts

ITR Filed Copy (Mentioning PAN)

3.5 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed available tender capacity (A X N X1.5 - B) WHERE A is Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress, N Is Number of years prescribed for completion of the works for which tenders are invited B is Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 03 Months. (period of completion of the works for which Tenders are invited)

Audited CA Certificate of Annual Turnover

Others

3.2 e Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totalling of value not less than Rs. lakhs (not less than 50% of WATER SUPPLY AND SANITARY works) in any one year

Others -- Not Required

3.3 a Owning the following key and critical equipment for this work 1. Excavators 1 No 2. Tipper/HGV-2 Nos. 3. self-loading Concrete mixer with weigh batching-1 No 4. Pin vibrators-2 Nos. 5.Shuttering sheets-500 sqm 6.Water tanker-1 No 7. Transit mixer-1 No

Others -- Own Machinery Equipments

3.3 b Lease/Hire of the following key and critical equipment for this work 1. Excavators 1 No 2. Tipper/HGV-2 Nos. 3. self-loading Concrete mixer with weigh batching-1 No 4. Pin vibrators-2 Nos. 5. Shuttering sheets-500 sqm 6. Water tanker-2 Nos 7. Transit mixer-1 No

Others -- Lease/Hire Basis Equipments

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Others -- Not required

List of existing commitments and ongoing works

Others -- B-VALUE

List of works for which tenders already submitted

Others -- B-VALUE

Banker Details for reference

Others -- Bankers details

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- not required

List of Financial Resources with Certificates

Others -- not required

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.8 L

Important Dates

Last Activity

2 Jul 2026

Published

2 Jul 2026

Bid Opening

13 Jul 2026

Download Ends

9 Jul 2026

Pre-Bid Meeting

8 Jul 2026

BOQ Preview

•

Consrtuction of Court Compound wall and providing other Infrastructural facilities for ongoing District Court Complex in Kolar

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all leads and lifts cost and conveyance of all materials, cost of labour...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever ...

•

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever require...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manuf...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation. Ref to MoRT&H : IRC - IS 164:2015 ----...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Direction and Place Identification Signs with size more than 0.9 m2 size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 mad...

•

Cold Plastic Paint - Providing and Laying of Rumble strips with Two component cold plastic with Primer coating rolled on surfacing material solvent free, high build two pack seamless, ...

•

Supplying & fixing Composite Fibre Reinforced Polymer (FRP) utility cover conforming to IS 12592:2002 with sufficient load bearing capacity as per technical specifications. - Light Duty Square 600x...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

•

Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints fin- ished with cement mortar 1:3 over existing cement c...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ...

•

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper jo...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, fac...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 160mm dia PVC coupler...

•

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 315mm dia PVC coupler...

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 160 mm dia PVC Elbows ---- With all ...

•

old Terrace screed Repair with Uv Resistant waterproof coating - Providing and Applying high elastic & resilient Acrylic polymer Waterproofing coating which is single component, cold applied,...

•

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-inc...

•

Construction of Median and Island with Soil Taken from Borrow Areas - Construction of median and Island above road level with approved material brought from borrow pits, spread...

•

Demolishing R.C.C. work manually/ by mechanical means including stack- ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge....

•

Demolishing brick work manually/ by mechanical means including stack- ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-i...

•

Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...

•

Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of sec...

•

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.Asbestos cement sheet ---- With ...

•

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...

•

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 63mm dia PVC couplers...

•

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments - 63 mm dia PVC Elbows ---- With all l...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

•

Concrete Works - Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay...

•

Concrete Works - Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified siz...

•

Providing and fixing precast cement concrete kerb stone made out of M20 with top and bottom width 114 and 165mm respectively 400mm high and 450mm in length finished with CM 1:3 plastering and finishin...

•

Engraving Judicial Emblem in Triangle of Size 7.00m (Base) x 4.00(Sloped Side) x 4.00(Sloped Side) and lettering for court Main boards in both Kannada and English Languages.(Rate Shall Include cost of...

•

Providing and fixing plain Sadarahalli granite benches of 4feet length and 1 feet width with side arm supports of 18" height with all lead and lift and loading and unloading as per the direction of in...

•

Providing and fixing pvc dustbins of 3feet height with all lead and lift and loading and unloading as per the direction of in charge of work including all taxes ---- With all leads and lifts cost and ...

•

Supply and fixing of fibre reinforced plastic (FRP) covers of size 600*600mm of dark grey colour with frame etc 40 tonne capacity as per approved drawing. ---- With all leads and lifts cost and convey...

•

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

•

Electrical Work

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Supplying of special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments to walk site etc. complete. 200mm dia PVC coupler...

•

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

•

LT Cable b) Laying of cable in trench 2.5 to 25 Sqmm ---- With ...

•

Supplying and fixing of spiral Earth Electrode as per BESCOM specification ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipme...

•

Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, ...

•

Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000 mm Standa...

•

Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 1000 mm Standa...

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Fixing halogen/metalhalide/SVL/IL/LED flood light fitting overexisting pole/wall ceiling including clamps,bolts, nuts and wiringusing suitable capacity wires. ---- With all leads and lifts cost and co...

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

•

Supplying heavy gauge PVC conduit pipe.dia.mm thick confirming to IS2509 with suitable size bends,junction boxes,adhesive paste etc,and fixing using inverted woodplugs incase of RCC ceiling and RCC wa...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplyinganddrawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for workin...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. ---- With all leads and lifts cost and con...

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 A --...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.32-40A 2 pole ---- With all leads and lifts cost and conveyance of al...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A ---- With all leads and lifts cost and conveyance of all materials, cos...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. ---- With all leads and lifts cost and conveyance of all materials, cost of...

•

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws. ---- With all leads and lif...

•

Supplying and fixing of GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg ---- With all leads and lift...

•

Supplying, fixing,wiring,earth electrode for grounding conduits, I.C. cutouts and other equipment'son themeter boardusing 40mmdia 2.90mm thick GI pipe 2.5m long buried in a pit .The pit should be fill...

•

GI/Copper strips for grounding connections, usingnecessary fixing

•

materials as required.25 x 3 mm GI strip ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, h...

•

Supplying of Aluminium End Terminal (Lug) as per BESCOM specification 16 Sqmm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equi...

•

Supplying of Aluminium End Terminal (Lug) as per BESCOM specification 32 Sqmm ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equi...

•

Supplying of Guy Wire & GI Wire as per IS-2141 as per BESCOM Specification. 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM ---- With all leads and lifts cost and conveyance of all materials, cost of ...

•

Supply of LED Bollard light fitting of .W with pressuredie cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded ...

•

Supplying heavygauge PVC conduit pipe . dia .mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc , and fixing using inverted woodplugs incaseof RCC ceiling and R...

•

Supply of LED floodlight luminaire with pressuredie cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarb...

•

Providing 22.5Kg C02 Gas Type Fire Extinugisher,Trolley Mounted,Easy Weight Management used Unused Mechanism,GrossWeight 93.5 Kg. empty Weight 71.0Kg. Can Height 1333MM Diameter 232MM, Discharge Time ...

•

Supply and installation of 6.5Kg C02 Gas val ve type Fire Extinugisher,Trolley Mounted, Easy Weight Management used Unused Mechanism, GrossWeight 30.5Kg. emptyWeight 24.0Kg. CanHeight 1015MMDiameter 1...

•

Supply and fixing of fibre reinforced plastic (FRP) covers of size 1000mmx100mm of dark grey colour with frame etc 40 tonne capacity as per approved drawing. ---- With all leads and lifts cost and con...

•

Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/three phase AC supply, hermetically sealed compressor with air cooled condenser motor c...

•

Installation charges fo rsplit type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitableAngle Iron support upto 3.0 Ton split/cassette type A/C ---- With ...

•

Supplying and installation of insulated refrigerant coppertubingof 5/8" and 3/8"with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testingoil and gas cha...

•

Extra for Fabrication supply and fixingof Stand fabricatedusing slotted angle /L angle of size 6mmx 50mm for mounting out door/indoor A.C. unit/ Batteries. ---- With all leads and lifts cost and conve...

•

Supplying, erecting, testing and commissioning of voltage stabilizer suitablefor170to270v input and load variation fromnoload to full load,withoverloadprotection,spikesuppression, operating at 00C to ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff

•

LT Cable ---- With all leads and lifts cost and conveyance of a...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

36199 KW4 bid doc 1.doc

Tender Document • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid