Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹36.9 L+₹1.7 L (4.91%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹38.9 L+₹3.7 L (10.6%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹49.2 L
EMD Value
₹98,500
Closing Date
6 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Kapurthala
Kapurthala
Provn of certain sanctioned Spl Repair Revenue and Minor works at Mil Stn Beas and Jandiala Guru under GE Kapurthala.
2022_MES_550998_1
GE KPT- /2022-23
Open Tender
Civil Works - Others
Item Rate
180 days
Area under GE Kapurthala
As per Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE Kapurthala
₹98,500
Yes
25 Jan 2023
9 Sept 2022
8 Oct 2022
9 Sept 2022
6 Oct 2022
22 Sept 2022
Amount
Surface dressing not exceeding 15cm deep and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation taking out old cable/laying of under ground cable/foundation of poles/stays including segregation of old serviceable bricks complete all as specified and directed by Engr-in-Charge.
Excavating over areas in soft/loose soil, not exceeding 1.5m deep and getting out, complete all as specified and directed by Engr-in-Charge.
Excavating over areas in soft/loose soil, exceeding 1.5m but not exceeding 3m deep and getting out, complete all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as specified and directed by Engr-in-Charge.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.
M&L for plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) in foundations, filling, sub base of floor, mass concrete etc complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class old size 'B' bricks, straight or curved on plan, exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
All as per item No 8 above but except bricks
M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
M&L 40mm thick PCC 1:2:4 type, B-0 (using 12.50mm graded stone aggregates ) as in damp proof course to horizontal or vertical surfaces including necessary formwork laid over layer of polythene film,50 micron thick,laid on a coat of bitumen primer,@0.30 to 0.50 kg per sqm, complete all as specified and directed by Engr-in-Charge.
M&L for sand cushining /filling under floors 50 mm thick for laying floor finishesh, complete all as specified and directed by Engr-in-Charge.
M&L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.
M&L for 100mm thick, plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregates) as in floor & finishing the surfaces even & smooth with using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for Plain Cement concrete 25mm thick, 1:2:4, type B-1 (using 20 mm graded stone aggregates) in mass concrete, flooring and finishing the surfaces even & smooth with using extra cement with water proofing compound as per manufacturers instructions, complete all as specified and directed by Engr-in-Charge. Note :- Liquid water proofing compound shall be measured and paid for separately.
M&L for Plain Cement concrete, 1:2:4, type B-2 (using 40 mm graded stone aggregates) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) with water proofing compound as per manufacturers instructions, complete all as specified and directed by Engr-in-Charge. Note :-Water proofing compound shall be measured and paid for separately.
M&L for use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc vertical or to batter and fair finished surface complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing top surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick in two layers (10mm+5mm) rendering in cement mortar 1:4 on other than fair faces of brick work and finishing surface even and smooth without using extra cement complete all as specified & directed.
M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete sufraces including finishing top surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge. Note : CBP to be done by sprayer.
M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion complete all as specified and directed by Engr-in-Charge. Note : Oil emulsion to be done by sprayer.
M&L preparation of Newly plastered surfaces and applying two coats of White Wash over a coat of chalk whiting/priming on plastered surfaces of walls etc, complete all as specified and directed by Engr-in-Charge.
S&F tubular steel work in vertical posts, rafters, purlins, etc including special shaped washer and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed by Engr-in-Charge.
S&F rolled sections(angle, pipe,tee, square pipe, plate etc) as in main and crossed beams , posts, hip and rafters etc, fixed with angle cleats or other connecting plates, rivets ,nut bolts etc, complete all as specified and directed by Engr-in-Charge, conforming Fe 410W (Gde E-250) Quality B
S&F for rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250 ) quality-A, complete all as specified and directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but n.exc 10cm long, dia of shank 10 to 15mm complete all as specified and directed by Engr-in-Charge.
M&L preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintover a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
M&L cement concrete (1:2:4) B-1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, benching, coping, bed blocks and roof kerbs, drain bottom benching, parapets walls, copings, cills, steps etc including weathering, slightly rounded or chamfered angles and throating, as directed etc including use of necessary form work complete all as specified and directed by Engr-in-Charge.
M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-Charge.
M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed by Engr-in-Charge.
M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engr-in-Charge.
M&L TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engr-in-Charge.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed by Engr-in-Charge.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting notexceeding 10 cm girth, complete all as specified and directed by Engr-in-Charge.
S&F rolled mild steel Fe-410W (Gde E-250) quality-A in Joist, door frame, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed by Engr-in-Charge.
S&F 30 mm thick, 2nd class hardwood Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides supplied & fixed to chowkats complete all as specified and directed by Engr-in-Charge.
S&F 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied & fixed to chowkats complete all as specified and directed by Engr-in-Charge.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
S&F mild steel 300mm , ordinary rat rail rod pattern spring including roller and roller plate and necessary welding complete all as specified and directed by Engr-in-Charge.
S&F 300mm long mild steel sliding door bolts plate type stove enmelled black with bright bolt not less than 12mm dia with and incl a minimum 8 bolt and nuts four on bolt plate & two on staple plate complete all as specified and directed by Engr-in-Charge.
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm complete all as specified and directed by Engr-in-Charge.
S&F mild steel barrel tower bolts 200mm long, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.
S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F Mild steel pressed handles of size 150 mm, oval type, stove enamelled black complete all as specified and directed by Engr-in-Charge.
Supply 100mm long MS but hinges medium wt colled rolled fixed to angled iron frame complete all as specified and directed by Engr-in-Charge.
S&F Extruded aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and directed by Engr-in-Charge.
M&L preparing new wood & wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
M&L for 75 mm thick Plain Cement Concrete ( 1:3:6 ) type C-2 using 40mm graded aggregate as in plinth protection finishing the surface even and fair including making joints and filled with bituminous mastic mix propotion of bitumen and sand 1:2 complete all as specified and directed by Engr-in-Charge.
S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note : Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.
S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, single rebated comprises gauzed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window including following fitting welded to frame shutter : (a) Mild Steel Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 20mm x 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note : Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.
Supply only 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F anodised aluminium snap grid of size 605 x 605mm in frame work for false ceiling complete all as specified and directed by Engr-in-Charge.
M&L providing and fixing Gypsum Board 8mm thick of size (600x600)mm in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.
M&L for joint free non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, over 15mm thick screed bed in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
M&L for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for Glazed ceramic coloured tiles in vertical surface 450mmx350mm & 7mm thick laid over and including 10mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge.
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over 20mm thick screed bed in cement mortar 1:6 and pointed in white or colour cement to match, complete all as specified and directed by Engr-in-Charge.
S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.
S&F 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc), 15mm bore of pipe complete all as specified and directed by Engr-in-Charge.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc), 20mm bore of pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs Chromium Plated long body Bib taps, cast copper alloy with crutch or butterfly handle with wall flange with aerator, screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repairs; 15mm bore PVC connection and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed by Engr-in-Charge.
S&F Brass chromium plated angular basin inlet connection (Angle Valve) quarter turn, with wall flange fancy type cast copper alloy 15mm bore, complete all as specified and directed by Engr-in-Charge.
S&F in repair; Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc complete all as specified and directed by Engr-in-Charge.
S&F in repair; 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed by Engr-in-Charge.
S&F in repair for fancy type chromium plated stop valves, cast (angle cock) copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for bore of size 15mm, complete all as specified and directed by Engr-in-Charge.
S&F 15 mm dia angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed (minimum weight 15mm - 90 gms), complete all as specified and directed by Engr-in-Charge.
S&F grating doom 100mm dia with waste hole of CP, complete all as specified and directed by Engr-in-Charge.
S&F in repair 15mm bore chromium plated two way stop valves cast copper alloy screwed down high pressure with with crutch or but-terfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
S&F vitreous china wash down water closet pan (pedestal pattern), with S-Trap, white (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc. as in repairs complete all as specified and directed by Engr-in-Charge.
S&F in repairs 10ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including supply of 32mm bore flush pipe & fixing brackets etc complete all as specified and directed by Engr-in-Charge.
S&F, PVC (SWR) pipe, 110mm dia pipe, single socketed in any length with rubber ring joints, laid in trenches/fixed with wall or in floors including taking down existing pipe complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in bed to drain pipes of 110mm bore dia including packing under and haunching surrounding pipes with concrete after they are laid and tested complete all as specified and directed by Engr-in-Charge.
M&L for providing pre-cast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in cover slab for manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered, weathering, throating etc including necessary use and waste of form work complete all as specified and directed by Engr-in-Charge.
M&L for Cutting into existing manholes for connecting new drains, of any dia making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) finished smooth and reforming benching as required for 150 mm dia SGSW pipe complete all as specified and directed by Engr-in-Charge.
M&L for plain cement concrete (1:2:4), type B-2, (using 40mm graded stone aggregate ) in foundations, filling, mass concrete etc complete all as specified and directed by Engr-in-Charge.
M&L for 100mm thick plain cement concrete (1:4:8), type D-2, (using 40mm graded stone aggregates) as in sub base of floor complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring, finished even and rough to receive the topping layer complete all as specified and directed by Engr-in-Charge.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.
M&L for Machine pressed precast concrete interlocking paver block, 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade, with grey cement and no pigment complete all as specified and directed by Engr-in-Charge.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.
Supply only Integral water proofing compound complete all as specified and directed by Engr-in-Charge.
Excavation in post holes (or similar holes) each not exceeding 0.5cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and directed by Engr-in-Charge.
S&F MS Pipes as in vertical posts, fixed with angle cleats or ther connecting plates, rivets, nut bolts etc, conforming Fe-410W (Gde E-250) Quality B grade complete all as specified and directed by Engr-in-Charge.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.
Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges complete all as specified and directed by Engr-in-Charge.
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster or cement lime mortar any description on brick or stone wall, etc including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.
Taking down chowkat or frame with shutters exc 1.5 sqm but n.exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.
Taking down chowkat or frame with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.
Dismantlling water tank of capacity exc 250 ltrs and not exc 500 ltrs and removing to store of any description, complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store, bore of pipe 15mm complete all as specified and directed by Engr-in-Charge.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store, bore of pipe 20mm complete all as specified and directed by Engr-in-Charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed by Engr-in-Charge.
M&L for 40mm thick plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub floor finished even and rough to receive the topping layer (w/o using extra cement) complete all as specified and directed by Engr-in-Charge.
M&L for 50mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub floor finished even and rough to receive the topping layer (w/o using extra cement) complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick PCC 1:2:4 type B-1 with 20mm graded stone aggregate as in flooring, finished even and rough to receive the topping layer and making good with neeru finish . complete all as specified and directed by Engr-in-Charge.
S&F solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube and edges will be painted to match with printed sheets, suppyling & fixing in opening as per specification & drawing, complete all as specified and directed by Engr-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x 15mm wide PVC sheet beading use inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree)used. Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engr-in-Charge.
S&F rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia ball brass valve, complete all as specified and directed by Engr-in-Charge.
S&F vitreous china squatting pan (Orissa pattern), size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding, complete all as specified and directed by Engr-in-Charge.
S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices with recessed bottom, jet spray, etc, complete all as specified and directed by Engr-in-Charge.
S&F vitreous china under counter top Wash Basin, snow white, oval type of size 560mm x 470mm x 190mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc, complete all as specified and directed by Engr-in-Charge.
S&F 15mm dia Chromium plated fancy type bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed, complete all as specified and directed by Engr-in-Charge.
S&F 15mm dia fancy type long body Pillar taps, cast copper alloy with capstan heads Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type etc, complete all as specified and directed by Engr-in-Charge.
S&F Wind tie for roof including securing bolts: flat iron fillets including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe 410-0 or Fe 310-0 etc, complete all as specified and directed by Engr-in-Charge.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, 20mm bore dia of pipe, complete all as specified and directed by Engr-in-Charge.
S&F 15mm dia fancy type, chromium plated with long shank and cup (concealed type) stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repairs complete all as specified and directed by Engr-in-Charge.
S&F steel windows or ventilators, fixed type, with glazing bars including one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-Charge.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) P trap 110/110mm bore complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) WC connector with lip ring, complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed by Engr-in-Charge.
S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls as a vent pipe, complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.
S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge.
M&L for PVC (SWR) floor trap, plain with grating 75mm diameter of outlet, setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed by Engr-in-Charge.
M&L for providing cement concrete type C-1 1:3:6 (20mm graded stone aggregate) in pedestal, bed plates,etc complete all as specified and directed by Engr-in-Charge.
M&L for 20mm thick granite (of any type) work (table rubbed and polished ) in steps ,jambs,pillars,window-cills,cooking plateform and like over including cement mortar (1:4) including poining in white cemnt (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed by Engr-in-Charge.
Soakage well excavation, in any type of soil, foundation in PCC 1:3:6, wells of honeycombed masonary with top ring of M-25 Concrete, including intercepting chamber and screen chamber brick work in CM, RCC cover slab in M-25/SFRC cover, interconnecting pipe of RCC/DWC complete filled with brick bats, complete of size 1.2m dia X 3m effective depth. complete all as specified and directed by Engr-in-Charge.
Supply & lay 200mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete 1:3:6 type C-2 as in concrete bed to drain pipes for bore dia of 200mm including packing under, and haunching against the sides of pipes after they are laid and tested; in, complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate as in surface channels and drains, complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces with liquid water proofing compound ,finished even and smooth without using extra cement etc including neeru finish to plastering complete all as specified and directed by Engr-in-Charge. Note : Water proofing compound shall be measured and paid separately.
Extra for forming fair finished drain or channel not exceeding 80cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and directed by Engr-in-Charge.
S&F 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls as a vent pipe, complete all as specified and directed by Engr-in-Charge.
S&F 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed by Engr-in-Charge.
Taking down carefully aluminium point wiring on casing caping/through conduit (light fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and directed by Engr-in-Charge.
M & L for point wiring for one light or one fan point controlled by one switch or with one switch and regulator with PVC unsheathed single core multistranded copper conductor (FRLS) cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm bore by cutting chases in wall by cutter and making good the surface in cm 1:3 and to the original specification and cast iron /pressed steel concealed terminal boxes including providing 3mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated copper conductor (FRLS) cable of size 1.5 sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed by Engr-in-Charge. (Switch/Socket outlet to be measured & paid for separately).
All as per Srl item No 137 but one fan point controlled by one, one way switch
All as per Srl item No 137 but one socket outlet 3 Pin, 6 Amp on independent board
All as per Srl item No 137 but one socket outlet 3 Pin, 6 Amp on same board.
Supply & fixing switch piano flush type 5 Amp single pole one way.
All as per srl item No 137 here in before but for 3 pin socket outlet 15 Amps on independent board with PVC unsheathed copper conductor cable of size 2.50 Sqmm including copper earth wire of size 1.50 Sqmm and connected to common earth dolly complete all as specified and directed by Engr-in-Charge. (Switch/socket to be measured & paid for separately)
S&F socket out let multipurpose 5 pin 6 Amps, flush type, polycarbonate, 230 / 240 Volts, complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type 15 Amp single pole one way, complete all as specified and directed by Engr-in-Charge.
S&F socket outlet multipurpose 2 in one, 3 pin 5/15Amps flush type, complete all as specified and directed by Engr-in-Charge.
S&F electronic fan regulator 230 volts, step type socket type, hum free 100/300 watt, complete all as specified and directed by Engr-in-Charge.
S&F in replacement of factory made powder coated distribution board SP & N ,230V,12 way,mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete all as specified and directed by Engr-in-Charge.
S&F in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and directed by Engr-in-Charge.
S&F surface mounting energy saving LED tube light fitting, 1x20W, 230V , high efficiency PMMA diffuser gives soft glare free light with LED tube rode 20 W (White), complete all as specified and directed by Engr-in-Charge.
S&F Water heater storage type, electric,capacity 50 litres, complete all as specified and directed by Engr-in-Charge.
S&F PVC connection cold water pipe 18" long, 15mm dia with brass jem nut and wahser, both side complete all as specified and directed by Engr-in-Charge.
All as per ser item No 151 here in before but hot water pipe made of chromium plated brass flexible tubing, complete all as specified and directed by Engr-in-Charge.
S&F MCB single pole 6 to 32 Amps 240 Volts, complete all as specified and directed by Engr-in-Charge.
S&F MCB 40 Amp SPN 240 volt, complete all as specified and directed by Engr-in-Charge.
S&F sheet metal enclosures double door, detachable gland plates flush/ mounting for MCB’s fitted with bus bar, earth wire and neutral link, 8 ways, 240 volts, complete all as specified and directed by Engr-in-Charge.
S&F ceiling rose surface bakelite 65 x 50mm three terminal complete all as specified and directed by Engr-in-Charge.
M&L for bell multi music typeDing Dong, AC 230 Volts, single pole, complete all as specified and directed by Engr-in-Charge.
S&F ceiling fan 1200 mm sweep, 240 Volts and connecting up including provision of flexible copper conductor cable from ceiling rose / connector to fan and GI pipe/ steel rod, nuts, bolts, clamps etc as required at site, complete all as specified and directed by Engr-in-Charge.
S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver Including necessary cutting of wall in sutiable dia for the fixing of exhaust fan and make it in good finish with plaster work complete all as specified and directed by Engr-in-Charge.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, complete all as specified and directed by Engr-in-Charge.
Sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 4.00 Sq mm 1100 volts grade including and 2.50 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and directed by Engr-in-Charge. Note : Two run of 4.0 Sqmm cable and one run of 2.50 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.
Sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 6.00 Sq mm 1100 volts grade including and 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and directed by Engr-in-Charge. Note : Two run of 6 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.
S&F LED Recessed full open 2 x 2 Tile 36 Watt,glare free uniform illumination having white powder coated extruded aluminium body suitable for armstrong and grid ceiling Product code LCTLRN-36-FO-CDL (Polaris I) of Crompton or equivalent in Bajaj/Havells/Crompton/Philips/Polycab
S&F LED wall mounting lights fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base complete. Product code LHDL03160099 0(CIty 3 ) of Havells or equivalent in Bajaj/crompton/Polycab/philips
M&L of earthing complete with galvanized steel earth plate trode 60cm x 60cm x 6mm thick buried directly in ground vertically in a pit not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below level connected to GI earth wire 4mm dia by means of bolts, nuts and washers (earth plate covered with charcoal dust and common salt in alternate layers) GI earth wire protected by galvanized steel pipe light grade of 15 mm dia upto switch board and connected to main switch board, including provision of 20mm dia GI tubing light grade watering pipe with funnel and wire mesh PCC earth pit (1:3:6) type C-1 covered with CI cover hinged with frame including excavation and earth work complete all as specified and shown in electrical plate No 5 of SSR Part I including testing on completion.
M&L for brick protection using old size sub class 'B' bricks, laid flat dry but adjoining to each other laid lengh wise perpendicular to the axis of cable complete all as specified and directed by Engr-in-Charge.
Supplying, filling in trenches spreading, leveling sand cushioning 8 cm below and 15 cm above the cable for under ground cable and 8 cm below the cable complete all as specified and directed by Engr-in-Charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed by Engr-in-Charge.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed by Engr-in-Charge.
S&F LED bldg security light fitting 20 watt Powder coated pressure die cast aluminium compact LED security light including 1.5 mtr long 40 mm bore GI pipe mounting bracket made to shape for fixing on wall with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers complete all as specified and directed by Engr-in-Charge.
M&L for GI Pipe 'light grade' galvanized with all fitting laid in trenches/on pole/road crossing of size 40mm, complete all as specified and directed by Engr-in-Charge.
S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver (metal body)Including necessary cutting of wall in sutiable dia for the fixing of exhaust fan and make it in good finish with plaster work, complete all as specified and directed by Engr-in-Charge.
G M BUILDERS 36
COSMO BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .